Subaru Buyers Guide

 

 2016 Subaru Impreza Wagon 5dr Man 2.0i Sport Premium

*
MSRP: $21,095
Invoice: $20,046

Gas Mileage:
CTY: 24    HWY: 33    CMB: 28
Engine/Fuel: 4 Cylinder Engine /2.0 L/122 Regular Unleaded H-4
Transmission: Manual w/OD
Door/Body Style: /Hatchback,Small Wagon
Drive Type: All Wheel Drive

Prices/Warranty

See the prices and various warranties offered.
  • General
  • MSRP: $21,095
  • Invoice Price: $20,046
  • Destination Charge: $0
  • Warranty
  • Basic (Month): 36
  • Basic (Mileage): 36,000
  • Powertrain (Month): 60
  • Powertrain (Mileage): 60,000
  • Rust (Month):  
  • Rust (Mileage):  

Engine & Emissions

View engine and emission data on this vehicle.
  • Engines & Emissions
  • 4 Cylinder Engine
  • Engine
  • Type of Engine: 4 Cylinder Engine
  • Displacement (CC): 2.0 L/122
  • Fuel System: Sequential MPI
  • Horsepower @ RPM: 148 @ 6200
  • Torque @ RPM: 145 @ 4200
  • Fuel Type: Regular Unleaded H-4

Dimensions

See the interior and exterior dimensions.
  • Exterior Dimensions
  • Track Front: 59.4
  • Track Rear: 59.6
  • Ground Clearance (in): 5.9
  • Overall Length (in): 174
  • Overall Width (in): 68.5
  • Overall Height (in): 57.7
  • Wheelbase (in): 104.1
  • Curb weight (lbs): 3032
  • Interior Dimensions
  • Seating capacity - Standard: 5
  • Seating Capacity - Maximum: 5
  • Headroom front (in): 39.8
  • Headroom rear (in): 37.7
  • Hip room front (in): 52.2
  • Hip room rear (in): 53.1
  • Leg room front (in): 43.5
  • Leg room rear (in): 35.4
  • Shoulder room front (in): 55.6
  • Shoulder room rear (in): 54.2

Features

See the features of this vehicle.
  • Exterior
    • Auto Off Aero-Composite Halogen Daytime Running Headlamps
    • Black Side Windows Trim and Black Front Windshield Trim
    • Body-Colored Door Handles
    • Body-Colored Front Bumper
    • Body-Colored Power Heated Side Mirrors w/Manual Folding and Turn Signal Indicator
    • Body-Colored Rear Bumper
    • Clearcoat Paint
    • Compact Spare Tire Mounted Inside Under Cargo
    • Fixed Rear Window w/Fixed Interval Wiper, Heated Wiper Park and Defroster
    • Front Fog Lamps
    • Fully Galvanized Steel Panels
    • Grille w/Chrome Bar
    • Liftgate Rear Cargo Access
    • Light Tinted Glass
    • Lip Spoiler
    • Rocker Panel Extensions
    • Roof Rack Rails Only
    • Steel Spare Wheel
    • Tailgate/Rear Door Lock Included w/Power Door Locks
    • Tires: P205/50R17 88V AS
    • Variable Intermittent Wipers w/Heated Wiper Park
    • Wheels: 17" x 7.0JJ Gray Finish Aluminum Alloy
  • Heating, Ventilation & Air Conditioning
    • A/C
  • Entertainment, Communication & Navigation
    • AM/FM Stereo
    • Auxiliary Audio Input
    • Bluetooth Connection
    • CD Player
    • Digital Signal Processor
    • HD Radio
    • Integrated Roof Antenna
    • MP3 Player
    • Radio: Subaru Starlink 6.2" Multimedia System -inc: AM/FM w/HD single disc CD player, MP3/WMA/CRR/RW file capability, single touch gesture high resolution 6.2" LCD display screen, Radio Broadcast Data System (RBDS), Bluetooth audio streaming connectivity, Bluetooth hands-free phone connectivity, iPod control capability, iTunes tagging capability, smartphone integration, AHA, Pandora, Starlink Cloud applications: calendar, iHeart radio, Stitcher, music player, news and weather, USB port, 3.5mm auxiliary input jack and 6 speakers StarLink enrollment cannot be applicable to Fleet Management Companies (FMCs) or to Commercial fleet accounts at this time.
    • Radio w/Seek-Scan, Clock and Steering Wheel Controls
    • Smart Device Integration
  • Wheels & Tires
    • Aluminum Wheels
    • Temporary Spare Tire
    • Tire Pressure Monitor
    • Tires - Front Performance
    • Tires - Rear Performance
  • Windows, Mirrors & Wipers
    • Driver Vanity Mirror
    • Heated Mirrors
    • Passenger Vanity Mirror
    • Power Mirror(s)
    • Power Windows
    • Rear Defrost

Safety Features

View the built in safety features included.
  • Safety Features
  • ABS And Driveline Traction Control
  • Airbag Occupancy Sensor
  • Back-Up Camera
  • Brake Assist
  • Child Safety Locks
  • Curtain 1st And 2nd Row Airbags
  • Daytime Running Lights
  • Driver Air Bag
  • Driver Knee Airbag
  • Dual Stage Driver And Passenger Front Airbags
  • Dual Stage Driver And Passenger Seat-Mounted Side Airbags
  • Electronic Stability Control (ESC)
  • Emergency S.O.S
  • Front Head Air Bag
  • Front Side Air Bag
  • Integrated Turn Signal Mirrors
  • Knee Air Bag
  • Low Tire Pressure Warning
  • Outboard Front Lap And Shoulder Safety Belts -inc: Rear Center 3 Point, Height Adjusters and Pretensioners
  • Passenger Air Bag
  • Passenger Air Bag Sensor
  • Rear Child Safety Locks
  • Rear Head Air Bag
  • Side Impact Beams
  • Stability Control
  • Traction Control
  • Anti-Theft
  • Keyless Entry
  • Power Door Locks
  • Braking & Traction
  • 4-Wheel Disc Brakes
  • ABS

Read Reviews

Expert opinions you can trust.

*Fuel Economy Guide

Research the yearly spend on gasoline for every Subaru in our database.

 

*NHTSA Test Results

Get crash test results, service bulletins, and product recalls for every Subaru model.
  •  

    Crash Test Data for 2016 Subaru

    No crash test data exists.

     

    Service Bulletins for 2016 Subaru

    2016 SUBARU BRZ
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 01-177-16
    This Service Information bulletin provides notice of an additional step to follow when diagnosing DTC P219A- ?Air-Fuel Ratio Imbalance (Bank 1)?.
    Bulletin Number: 02-133-12R
    The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-164-16
    This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
    Bulletin Number: 02-166-17
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-166-17R
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 03-80-18
    This Service Information bulletin announces a change to the flywheel (pilot) bearing to a ?environmentally friendly? type which is compliant with the REACH (Registration, Evaluation, Authorization and restriction of CHemicals) guidelines
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 05-65-18
    This bulletin announces a change made to the front lower control arm ball joint boots. The boot material has been changed to provide increased resistance to damage from ozone.
    Bulletin Number: 06-68-19
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 07-109-16
    This bulletin provides a procedure to address a hard starting condition which may occur on vehicles repeatedly driven for short distances. For example: This condition could arise while the vehicle is in inventory for an extended period of t
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 09-54-12R
    This bulletin provides a procedure to address customer concerns of a high-pitched "chirp", "squeak" or "cricket" sound heard coming from the engine's Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So
    Bulletin Number: 09-54-12R
    This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So
    Bulletin Number: 09-69-19
    This bulletin provides an additional service procedure for replacing the pulsation dampers located on both low-pressure fuel delivery pipes as shown in the illustration below. Although the BRZ Service Manual does not currently show the damp
    Bulletin Number: 12-190-15R
    THIS BULLETIN PROVIDES A PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A CREAKING SOUND HEARD WHEN OPERATING THE CLUTCH PEDAL. THE CAUSE OF THE SOUND HAS BEEN IDENTIFIED AS A VERY SLIGHT AMOUNT OF MOVEMENT BETWEEN THE 2 LAYERS OF METAL (CIRCLED
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-250-18
    This bulletin announces a design change made to the rear bumper cover (face). To insure a proper fit of the new cover, the rear edge portion of the existing inner mud guards (splash shields) will need to be modified slightly in specific are
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 12-267-19
    This bulletin announces availability of a new retaining plate and installation method to address gapping conditions which may develop between the front bumper cover and fender.
    Bulletin Number: 12-271-19
    This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. Thi
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-244-19
    This bulletin announces availability of individual service parts and provides an installation procedure for the A/C compressor clutch assembly. Previously, a complete compressor assembly was necessary if any of the clutch components require
    Bulletin Number: 16-96-15
    THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR OPTIMIZING THE TRANSMISSION CONTROL MODULE (TCM) ON ALL 2015 AND SOME EARLY-PRODUCTION 2016MY VEHICLES TO CONTROL AN ENGINE IDLE SPEED FLUCTUATION CONDITION WHEN IN PARK OR NEU
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-182-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: SST
    "SPECIAL SERVICE TOOL SHIPMENT: BRZ WINDOW GLASS WRENCH STARTING THE WEEK OF AUGUST 24, 2015, SUBARU RETAILERS WILL RECEIVE A SPECIAL SERVICE TOOL FOR THE BRZ. THE TOOL IS BEING SENT AS ESSENTIAL AND IS USED WHEN SERVICING THE BRZ WINDOW R
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    2016 SUBARU CROSSTREK
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-166-17
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-166-17R
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-177-18
    In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 03-67-12R
    SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI
    Bulletin Number: 03-82-18
    This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases
    Bulletin Number: 04-20-18
    This Service Information bulletin announces a running change made to the Steering Angle Sensor. The (new) -style originally used on Legacy and Outback has been adapted.
    Bulletin Number: 04-21-18
    This bulletin announces availability of a new Electronic Power Steering (EPS) gear box assembly designed to address a VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where
    Bulletin Number: 04-24-18
    This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 05-69-19
    This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust.
    Bulletin Number: 06-55-16R
    (ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is
    Bulletin Number: 06-55-16R
    EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lub
    Bulletin Number: 06-55-16R
    This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for
    Bulletin Number: 06-59-17R
    This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design
    Bulletin Number: 06-67-18
    This Service Information Bulletin provides additional steps to follow when diagnosing a DTC C0075: WHEEL CYLINDER PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed above. The information in this bulletin is applicable when DTC C
    Bulletin Number: 06-68-19
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 07-118-17R
    Models with SRVD Only. This bulletin provides revised diagnostic and repair procedures to address DTC B2327 for the Subaru Rear Vehicle Detection (SRVD), Blind-Spot Detection (BSD) and Rear Cross Traffic Alert (RCTA) system on the applica
    Bulletin Number: 07-119-17
    This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) a
    Bulletin Number: 07-119-17R
    This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) a
    Bulletin Number: 07-126-17
    HYBRID MODELS ONLY. This Service Information bulletin provides a precaution regarding the diagnosis of DTC P0A1D.
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warni
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-134-18
    This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cu
    Bulletin Number: 07-135-18
    HEV MODELS ONLY. This Service Information bulletin informs of a potentially incorrect display when a DTC is stored in either the Hybrid Power Control Module (HPCM) or in the OBD menu, Mode $02 while retrieving freeze-frame data (FFD). I
    Bulletin Number: 07-144-18
    This bulletin announces a change made to the assembly process of the rear combination lamps to enhance the seal between the lens and body. This change optimizes the lamp?s water resistance by using advanced lens sealing and plastic welding
    Bulletin Number: 07-147-19
    In the Service Manual for the CROSSTREK hybrid model, the diagnostic procedures for P1C06 and P1C07, which are DTCs for checking the relay, have no steps for specifically checking the relay. Therefore, if trouble occurs in the 12 V battery
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 08-39-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F
    Bulletin Number: 09-64-16
    This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T
    Bulletin Number: 09-68-18
    This Service Information bulletin announces a design change to the exhaust system cover. The purpose of the change is to improve parts integration (or ?commonality?) between models.
    Bulletin Number: 10-83-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR
    Bulletin Number: 10-83-15R
    Models with Manual HVAC Systems only. This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed sw
    Bulletin Number: 10-84-16
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-84-16R
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-86-17R
    A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.
    Bulletin Number: 11-185-18
    This bulletin announces availability of reprogramming files to optimize the Battery Energy Control Unit (BECU) which is a component part of the HEV battery pack. The new files address the BECU logic used for detection of the HEV battery pac
    Bulletin Number: 12-182-15R
    This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added.
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-207-16
    This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the w
    Bulletin Number: 12-209-16
    This bulletin announces a design change to the front speaker grille. The new grilles have increased retention capabilities to address customer concerns of a loose fit.
    Bulletin Number: 12-224-17R
    This bulletin provides a procedure for replacement of the black foam rubber insulating cushions for the roof rails. In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body.
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-232-18
    This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a h
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 122663
    Remote Engine Start Systems Trouble Shooting Guide
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-182-15R
    THIS BULLETIN ANNOUNCES A PROCEDURE FOR UPDATING THE NAVIGATION / AUDIO UNITS OPERATING SYSTEM SOFTWARE. THE FOLLOWING LIST OF SYMPTOMS AND RELATED CHANGES PROVIDES A BRIEF DESCRIPTION OF WHICH CUSTOMER CONCERNS THE UPDATES ARE INTENDED TO
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-191-15
    THIS BULLETIN ANNOUNCES AVAILABILITY OF A REPLACEMENT ATTACHMENT HARDWARE KIT FOR THE REAR SPLASH GUARDS TO ADDRESS CUSTOMER CONCERNS OF POOR APPEARANCE DUE TO CORROSION AND / OR RUSTING. EXAMPLES OF THE CONDITION ARE SHOWN IN THE PHOTOS BE
    Bulletin Number: 15-195-16
    This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.
    Bulletin Number: 15-196-16
    Only those vehicles with Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not
    Bulletin Number: 15-196-16M
    Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may no
    Bulletin Number: 15-196-16M2
    Reminder: Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their serv
    Bulletin Number: 15-196-16R
    ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription con
    Bulletin Number: 15-196-16R
    TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-201-16
    This Service Information bulletin announces a design change to the retractable portion of the tonneau cover made to address customer concerns of the cover retracting on its own while driving on rough roads. The shape and length (an addition
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-206-16
    USB Device Not Recognized on Fujitsu-Ten (F10) 7? Display Navigation and Display Audio Units. This bulletin announces availability of a new auxiliary USB unit to address customer concerns where the 7? Display Audio or Audio Navigation he
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-222-18
    This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio
    Bulletin Number: 15-232-18
    This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
    Bulletin Number: 16-102-16
    TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 16-108-17R
    HYBRID MODELS ONLY. In conjunction with current TSB 16-94-15R, this bulletin provides a new service procedure for repairing the drive motor case assembly. Previously, failure of the non-serviceable o-rings on the electric oil pump relie
    Bulletin Number: 16-110-18
    Hybrid (HEV) Models ONLY. This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM). These files will address isolated customer concerns of a ?shock? or ?bump? feeling felt during low spee
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-193-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for b
    Bulletin Number: 18-194-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: f10-audio-navi-d
    Subject: Removal of Certain Fujitsu 10 Audio / Navigation Update Files from Subarunet The following update files have been temporarily removed from Subarunet due to potential quality concerns with the 2nd file used in those updates. Retai
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: SOA321100
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: Torque_Conv-Defe
    Please check your inventory and incoming shipments for part numbers 31000AJ730R1 & 31000AJ740R1 manufactured prior to 2/9/18. If the face of the torque converter is stamped with a 290, 291 or 292, please return these parts to your facing R
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WUE-90
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90R
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90 tool
    SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
    2016 SUBARU FORESTER
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-134-12R
    The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-166-17
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-166-17R
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-173-18
    2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.
    Bulletin Number: 02-173-18
    2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrences of ice formation from condensation in the duct?s PCV system passages.
    Bulletin Number: 02-177-18
    In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 02-182-19
    This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and be
    Bulletin Number: 03-67-12R
    SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI
    Bulletin Number: 03-82-18
    This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases
    Bulletin Number: 04-20-18
    This Service Information bulletin announces a running change made to the Steering Angle Sensor. The (new) -style originally used on Legacy and Outback has been adapted.
    Bulletin Number: 04-21-18
    This bulletin announces availability of a new Electronic Power Steering (EPS) gear box assembly designed to address a VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where
    Bulletin Number: 04-23-18
    This Service Information bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or
    Bulletin Number: 04-23-18R
    This bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging
    Bulletin Number: 04-24-18
    This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 05-63-18
    This bulletin announces a design change made to the forward bushing used in the front lower control arm to address customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel. The material for the cushi
    Bulletin Number: 05-69-19
    This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust.
    Bulletin Number: 06-55-16R
    (ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is
    Bulletin Number: 06-55-16R
    EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lub
    Bulletin Number: 06-55-16R
    This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for
    Bulletin Number: 06-59-17R
    This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 07-102-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE TO FOLLOW FOR INITIAL DIAGNOSIS OF THE EYESIGHT SYSTEM. WHEN RECEIVING A CUSTOMER CONCERN OF A PROBLEM, E.G., AN INDICATOR LAMP ILLUMINATES OR A WARNING MESSAGE APPEARS ON THE INFORMATI
    Bulletin Number: 07-103-15
    THIS SERVICE INFORMATION BULLETIN ANNOUNCES A NEW REQUIREMENT REGARDING ONE-TIME USE PARTS WHICH MUST REPLACED WHENEVER DISCONNECTING OR REPLACING THE PRG ROD. THE SPRING STEEL RETAINING CLIPS (STOP RINGS) WHICH LOCK THE PRG ROD TO THE BALL
    Bulletin Number: 07-108-16
    This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760 / Sensor Mat Abnormal. This information replaces the current procedure until the Service Manual is updated in the near future.
    Bulletin Number: 07-108-16R
    This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760- Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedu
    Bulletin Number: 07-108-16R
    This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795
    Bulletin Number: 07-108-16R
    This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as
    Bulletin Number: 07-112-16R
    2.5L MODELS ONLY. This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator's current output outside of the specified limits.
    Bulletin Number: 07-112-16R
    New Alternator Assembly. This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator?s current output outside of the specified limits.
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warni
    Bulletin Number: 07-130-18
    This bulletin describes a design change to the center bracket component of the window regulator assembly. The change was made to address customer concerns of the front door glass shuddering while opening or closing. Moisture accumulation
    Bulletin Number: 07-133-18
    2.0L Turbor Models only. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-136-18
    TURBO MODELS ONLY. This bulletin announces availability of new parts to address a limited number of reports involving an engine vibration felt when at idle after the engine is up to operating temperature. In some cases, the above engine m
    Bulletin Number: 07-138-18
    This Service Information bulletin announces the standardization of the IG2 and ACC relays used on the models listed. Both of these relays are located on the back (front facing) side of the passenger compartment fuse box (F/B).
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 07-154-19
    This Service Information bulletin provides a revised Step to follow when diagnosing a DTC B2513- LATCH CONDITION FAILURE. The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The
    Bulletin Number: 07-75-13R
    On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back ?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate
    Bulletin Number: 07-75-13R
    This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. The engine management system is equipped with a back-up memory. When disconnecting t
    Bulletin Number: 08-39-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-64-16
    This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T
    Bulletin Number: 09-65-16
    This bulletin announces a design change of the fuel injector used on 2.0L DIT models to prevent water intrusion. A new silicone rubber cover has been developed and incorporated into production for this purpose.
    Bulletin Number: 096516R
    REVISED. This bulletin announces a design change of the fuel injector used on 2.0L DIT models to prevent water intrusion. A new silicone rubber cover has been developed and incorporated into production for this purpose.
    Bulletin Number: 09-68-18
    This Service Information bulletin announces a design change to the exhaust system cover. The purpose of the change is to improve parts integration (or ?commonality?) between models.
    Bulletin Number: 10-83-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR
    Bulletin Number: 10-83-15R
    Models with Manual HVAC Systems only. This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed sw
    Bulletin Number: 10-84-16
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-84-16R
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-86-17R
    A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.
    Bulletin Number: 11-123-12
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 11-164-16
    Dated 4/29/2016 although posted on 5/2/2016. 2.0L DI Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engi
    Bulletin Number: 11-164-16R
    This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000-2500 RPM on light acceleration du
    Bulletin Number: 11-169-16
    Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on accel
    Bulletin Number: 11-169-16R
    This bulletin announces the availability of reprogramming files to optimize the ECM. These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on acceleration due to phantom
    Bulletin Number: 11-173-17
    This bulletin announces availability of ECM reprogramming files designed to optimize the ECM for improving HVAC blower fan speed control. There have been a limited number of cases with reports describing the blower fan speed fluctuating /
    Bulletin Number: 11-187-18
    This bulletin announces reprogramming file availability to optimize the ECM and address isolated customer concerns of hesitation on acceleration. The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR)
    Bulletin Number: 11-191-19
    This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: âECM/PCM ENGINE OFF TIMER PERFORMANCEâ. Under certain RARE conditions, an electrostatic surge may influ
    Bulletin Number: 11-191-19R
    This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: âECM/PCM ENGINE OFF TIMER PERFORMANCEâ. Under certain RARE conditions, an electrostatic surge may influ
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-204-16R
    This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a "twisting" condition. This can occur while driving on
    Bulletin Number: 12-204-16R
    This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a ?twisting? condition. This can occur while driving on r
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-195-16
    This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.
    Bulletin Number: 15-196-16
    Only those vehicles with Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not
    Bulletin Number: 15-196-16M
    Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may no
    Bulletin Number: 15-196-16M2
    Reminder: Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their serv
    Bulletin Number: 15-196-16R
    ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription con
    Bulletin Number: 15-196-16R
    TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-200-16
    Models with Fujitsu-TEN / FTEN / (F10) Gen2 Navigation System only. Fujitsu-TEN / FTEN / (F10) Navigation: Voice Recognition Concerns with Finding Addresses in Some Metro Areas.
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-206-16
    USB Device Not Recognized on Fujitsu-Ten (F10) 7? Display Navigation and Display Audio Units. This bulletin announces availability of a new auxiliary USB unit to address customer concerns where the 7? Display Audio or Audio Navigation he
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-222-18
    This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio
    Bulletin Number: 15-232-18
    This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
    Bulletin Number: 15-239-19
    This Service information bulletin announces a design change made to the Cargo Net ? Rear Replacement Hardware Kit (F551SAG301). The new part number is F551SAN010. The change was made to address concerns regarding the ?mushroom? anchors eith
    Bulletin Number: 16-102-16
    TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.
    Bulletin Number: 16-103-16
    Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 16-120-19
    This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i
    Bulletin Number: 16-97-15
    THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-192-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-195-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: SM
    THE 2016 MY FORESTER SERVICE MANUAL (LOCATED IN THE SERVICE DIAGNOSTICS SECTION OF STIS) REQUIRES INTERNET EXPLORER (IE) 11 OR HIGHER. ALL SDS NOTEBOOKS ARE CURRENTLY RUNNING INTERNET EXPLORER 8 AND WILL BE UPGRADED TO INTERNET EXPLORER 11
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WTA-62
    Turbo models only. Subject: Update ? Subaru Safety Recall Campaign/ STOP SALE: WTA?62 Turbo Engine Air Intake Duct. Owner Notification: All potentially affected vehicle owners will be notified by first class mail on or around April 15, 2
    Bulletin Number: WTA-62A
    Turbo models only. Service Procedure Bulletin. The repair procedure will involve inspecting and possibly replacing the turbocharger air intake duct. Inspection of the turbocharger air intake duct lot number (date) molded on the duct will be
    Bulletin Number: WTA-62SS
    Subaru Safety Recall Campaign/ STOP SALE: WTA?62 Turbo Engine Air Intake Duct. The turbocharger air intake duct on affected vehicles may have been produced with incorrect material that is susceptible to cracking.
    Bulletin Number: WUE-90
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90R
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90 tool
    SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
    2016 SUBARU IMPREZA
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-134-12R
    The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-166-17
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-166-17R
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-177-18
    In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 03-67-12R
    SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI
    Bulletin Number: 03-70-12R
    REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS - THIS BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A HIGH-PITCHED
    Bulletin Number: 03-82-18
    This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases
    Bulletin Number: 04-20-18
    This Service Information bulletin announces a running change made to the Steering Angle Sensor. The (new) -style originally used on Legacy and Outback has been adapted.
    Bulletin Number: 04-21-18
    This bulletin announces availability of a new Electronic Power Steering (EPS) gear box assembly designed to address a VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where
    Bulletin Number: 04-24-18
    This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 06-55-16R
    EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lub
    Bulletin Number: 06-55-16R
    This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for
    Bulletin Number: 06-59-17R
    This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design
    Bulletin Number: 06-67-18
    This Service Information Bulletin provides additional steps to follow when diagnosing a DTC C0075: WHEEL CYLINDER PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed above. The information in this bulletin is applicable when DTC C
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 07-105-16
    THIS BULLETIN ANNOUNCES AVAILABILITY OF A NEW DCCD CONTROL MODULE TO ADDRESS CUSTOMER CONCERNS OF THE MANUAL SETTING BEING LOST WHEN TURNING OFF THE IGNITION. IF THE OPERATOR ADJUSTS THE SETTING OF THE DCCD FEATURE FROM THE DEFAULT, THIS NE
    Bulletin Number: 07-119-17
    This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) a
    Bulletin Number: 07-119-17R
    This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) a
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warni
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-134-18
    This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cu
    Bulletin Number: 07-138-18
    This Service Information bulletin announces the standardization of the IG2 and ACC relays used on the models listed. Both of these relays are located on the back (front facing) side of the passenger compartment fuse box (F/B).
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 08-39-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-64-16
    This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T
    Bulletin Number: 10-83-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR
    Bulletin Number: 10-83-15R
    Models with Manual HVAC Systems only. This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed sw
    Bulletin Number: 10-84-16
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-84-16R
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-86-17R
    A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.
    Bulletin Number: 12-182-15R
    This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added.
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: ? the mounting
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: * the mounting p
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-203-16
    This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. A design change was made to the wave washer used at the attachment p
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-207-16
    This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the w
    Bulletin Number: 12-209-16
    This bulletin announces a design change to the front speaker grille. The new grilles have increased retention capabilities to address customer concerns of a loose fit.
    Bulletin Number: 12-224-17R
    This bulletin provides a procedure for replacement of the black foam rubber insulating cushions for the roof rails. In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body.
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-232-18
    This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. When a h
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be
    Bulletin Number: 12-238-18R
    This bulletin announces a design change to the front door checkers used on the models listed. The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed.
    Bulletin Number: 12-241-18
    4 DOOR MODELS ONLY. This bulletin announces a change made to the trunk lid lock (latch) assembly. The purpose of this change is to improve parts integration (or ?commonality?) between models. This change is not intended to address any sp
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 122663
    Remote Engine Start Systems Trouble Shooting Guide
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-195-16
    This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.
    Bulletin Number: 15-196-16
    Only those vehicles with Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not
    Bulletin Number: 15-196-16M
    Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may no
    Bulletin Number: 15-196-16M2
    Reminder: Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their serv
    Bulletin Number: 15-196-16R
    ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription con
    Bulletin Number: 15-196-16R
    TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-201-16
    This Service Information bulletin announces a design change to the retractable portion of the tonneau cover made to address customer concerns of the cover retracting on its own while driving on rough roads. The shape and length (an addition
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-206-16
    USB Device Not Recognized on Fujitsu-Ten (F10) 7? Display Navigation and Display Audio Units. This bulletin announces availability of a new auxiliary USB unit to address customer concerns where the 7? Display Audio or Audio Navigation he
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-222-18
    This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio
    Bulletin Number: 15-232-18
    This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
    Bulletin Number: 16-102-16
    TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 16-97-15
    THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-186-16
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-193-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for b
    Bulletin Number: 18-194-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: f10-audio-navi-d
    Subject: Removal of Certain Fujitsu 10 Audio / Navigation Update Files from Subarunet The following update files have been temporarily removed from Subarunet due to potential quality concerns with the 2nd file used in those updates. Retai
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: Torque_Conv-Defe
    Please check your inventory and incoming shipments for part numbers 31000AJ730R1 & 31000AJ740R1 manufactured prior to 2/9/18. If the face of the torque converter is stamped with a 290, 291 or 292, please return these parts to your facing R
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WUE-90
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90R
    Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
    Bulletin Number: WUE-90 tool
    SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
    2016 SUBARU LEGACY
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-134-12R
    The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-171-18R
    This bulletin provides a service procedure for installation of additional foam packing to enhance performance of the Ambient Air Temperature Sensor. The additional foam better insulates the sensor from engine compartment heat which may lead
    Bulletin Number: 02-177-18
    In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 03-67-12R
    SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI
    Bulletin Number: 03-69-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 04-17-17-R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) gear box (steering rack) assembly. The repair (when applicable) involves inst
    Bulletin Number: 04-17-17R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) rack assembly. The repair involves installation of a new tension spring for
    Bulletin Number: 05-64-18
    This Service Information bulletin announces a change made to the rear frame stay mounting flange bolts. The new flange bolts (5 used per side) have been lengthened by 2mm to an overall length of 25mm.
    Bulletin Number: 05-67-19
    This bulletin announces a slight design change made to the sealing areas of the wheel hub assemblies for the models as listed above. The change was made to enhance productivity during the vehicle assembly process.
    Bulletin Number: 06-63-18R
    This bulletin announces a design change to the EPB adapter cord harness connector. In some cases, the retaining tab of the connector may become damaged as a result of removal or installation for diagnosis and later and cause DTC C1956 or C1
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 06-69-19R
    This bulletin announces a design change made to the rear ABS wheel speed sensor on the models listed above. The change involves the addition of an additional shielding cover to protect the harness from damage caused by road debris.
    Bulletin Number: 06-70-19
    This bulletin announces a change to the operating software included in the Vehicle Dynamic Control (VDC) Control Module and Hydraulic Unit (VDCCM&H/U) on the models listed above. This change is in response to a very small number of customer
    Bulletin Number: 07-106-16
    THIS BULLETIN ANNOUNCES A CHANGE TO THE BATTERY SENSOR TO PREVENT UNNECESSARY OCCURRENCE OF DTC P1C00 BEING SET / STORED IN THE ECM MEMORY.
    Bulletin Number: 07-114-16
    This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. When pressing the buttons to recall one of the last seat positions memor
    Bulletin Number: 07-114-16R
    This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. When pressing the buttons to recall one of the last seat positions mem
    Bulletin Number: 07-131-18
    This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. VDC and/or
    Bulletin Number: 07-131-18R
    This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s (e. g. VDC and/or EyeSigh
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 07-153-19
    This service bulletin announces availability of the cap portion (a.k.a. spark plug boot) as a service part separate from the complete ignition coil assembly. If the cap portion as shown in the illustrations below is damaged during removal o
    Bulletin Number: 07-89-15R
    "IF YOU RECEIVE A CUSTOMER CONCERN OF A NO CRANK / NO START CONDITION DURING VERY COLD TEMPERATURES, THE IG1, IG2, ACC1, ACC2 AND/OR THE EGI MAIN RELAYS MAY BE THE ROOT CAUSE AND REQUIRE REPLACEMENT. IT IS GENERALLY REPORTED THAT THE CAR ST
    Bulletin Number: 07-89-15R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 07-93-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES THE PROCEDURE TO FOLLOW WHEN RECEIVING A CUSTOMER CONCERN REGARDING OPERATION OF THEIR POWER WINDOW AUTO-UP AND/OR AUTO-DOWN FEATURE. TESTING OF RETURNED POWER WINDOW SWITCH ASSEMBLIES HAS REVEALED
    Bulletin Number: 09-61-15
    THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSS-SECTION ILLUSTRA
    Bulletin Number: 09-61-15R
    "THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSS-SECTION ILLUSTR
    Bulletin Number: 09-61-15R
    THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSSSECTION ILLUSTRAT
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-66-16
    This bulletin announces a change in the production procedure for the rear muffler assembly. Spot-weld locations securing the outer shell portion have been changed to improve overall rigidity. A gap may develop at the spot welded seam as a
    Bulletin Number: 10-90-19
    This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the ?pressed? position but not returning to ?flush? with
    Bulletin Number: 10-90-19R
    This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the âpressed❠position but not returning to âflushâ
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). * Potential battery discharge (dead batter
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: ? Check Engine light coming on (with DTC P05A0 stored in memory). ? Potential battery discharge (dead batter
    Bulletin Number: 11-176-17
    This bulletin announces availability of reprogramming files to optimize the ECM for control of battery charging functions. Depending on vehicle use conditions, the battery state of charge value may differ slightly from the actual value. T
    Bulletin Number: 11-181-18
    This bulletin announces availability of reprogramming files to optimize the ECM. These new files will address an idle drop condition which may occur when the A/C system switches off at low engine RPM during warm-up after a cold start.
    Bulletin Number: 12-135-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-137-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-164-14
    FILM RESIDUE REMOVAL FROM UNDERSIDE OF FRONT SEAT CUSHION COVERS
    Bulletin Number: 12-176-14R
    THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A WIND RUSHING-TYPE SOUND WHICH SEEMS TO COME FROM THE FRONT DOOR GLASS SASH AREA. CUSTOMERS MAY REPORT A CONCERN WITH ONE OR BOTH FRONT DOORS. IT IS ONLY NECESSARY
    Bulletin Number: 12-185-15R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-185-15R
    THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A WIND RUSHING AND / OR FLUTTERING-TYPE SOUND ORIGINATING FROM THE B PILLAR AREA OF THE VEHICLE. THE SOUND IS USUALLY REPORTED TO BE MORE PREVALENT WHEN CROSSWINDS ARE PRESENT AND / OR
    Bulletin Number: 12-192-15
    SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. FURTHER INVESTIGATION HAS DETERMINED THE ROOT CAUSE FOR MANY OF THESE FAILURE
    Bulletin Number: 12-192-15R
    SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. FURTHER INVESTIGATION HAS DETERMINED THE ROOT CAUSE FOR MANY OF THESE FAILURE
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-203-16
    This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. A design change was made to the wave washer used at the attachment p
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-218-17
    This bulletin provides supplemental information and an inspection point to use when diagnosing a wind rushing sound concern that persists on vehicles: * past the production change provided in TSB 12-176-14R, dated 10/28/2015 or * which h
    Bulletin Number: 12-219-17
    This bulletin provides new part information and an identification procedure to address a small number of vehicles identified with a sticking secondary hood latch mechanism. The hood latch mechanism is exposed to foreign materials during nor
    Bulletin Number: 12-226-17
    This bulletin provides part number and design change information regarding the fuel door (saucer) assembly which may not open properly due to ice accumulation in sub-freezing conditions.
    Bulletin Number: 12-226-17R
    This bulletin provides part number and design change information regarding the fuel door (saucer) assembly which may not open properly due to ice accumulation in sub-freezing conditions.
    Bulletin Number: 12-230-17
    This Service Information bulletin provides precautions to use when installing the trunk garnish panel located between the combination lamps. If the garnish is not installed properly, the small rubber protector(s) at the bottom edges of th
    Bulletin Number: 12-246-18
    This bulletin provides a procedure for diagnosing and repairing customer concerns of a "popping" or "snapping" -type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip contacts or c
    Bulletin Number: 12-246-18R
    This bulletin provides a procedure for diagnosing and repairing customer concerns of a âpopping❠or âsnapping❠-type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip conta
    Bulletin Number: 12-249-18
    This Service Information bulletin advises of a design change made to the rear body panel. This panel is located between the trunk and the rear glass and incorporates the package shelf. It has been re-designed with convex surfaces added to p
    Bulletin Number: 12-253-18
    This bulletin provides a procedure to help identify the source of a squeaking, creaking or popping -type sound heard coming from the driver?s seat. A change has been made to the Teflon bushings used in the seat cushion frame assembly.
    Bulletin Number: 12-253-18R
    This bulletin provides a procedure to help identify the source of a squeaking, creaking or popping -type sound heard coming from the driver?s seat. A change has been made to the Teflon bushings used in the seat cushion frame assembly.
    Bulletin Number: 122565-122550
    Remote Engine Start Systems Trouble Shooting Guide
    Bulletin Number: 12-268-19
    This Service Information bulletin announces a change made to the mass damper plate and sub-woofer mounting bolts. The threaded end of the new bolts has been changed to a round type instead of square to prevent getting caught on items as the
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-177-14R
    THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION GEN 2 F10 AUDIO / NAVIGATION SYSTEM. WE WILL CONTINUE TO ADD MORE HELPFUL
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-192-16
    THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF LOOSE OR GAPPING ACCESSORY FRONT WHEEL ARCH MOLDING(S) (E201SAL000 MOLDING KIT). THERE ARE 2 RETAINING CLIPS ON EACH MOLDING WHICH HAVE BEEN IMPROVED TO ENHANCE RETE
    Bulletin Number: 15-194-16
    "THIS BULLETIN ANNOUNCES AVAILABILITY OF AN ENHANCED AUDIO SYSTEM POWER AMPLIFIER WHICH CONTAINS SOFTWARE TO ADDRESS CUSTOMER CONCERNS OF VOICE GUIDANCE INSTRUCTIONS (WORDS) BEING CUT SHORT OR CUT OFF. FOR EXAMPLE: INSTEAD OF THE INSTRUCTIO
    Bulletin Number: 15-194-16
    This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. For example: instead of the instruction
    Bulletin Number: 15-194-16R
    Models Equipped with Navigation and Harman Kardon Power Amplifier Revised TSB. Fujitsu 10/ FTEN/ F10 Navigation Voice Guidance Instructions Getting Cut Off. This bulletin announces availability of an enhanced audio system power amplifier
    Bulletin Number: 15-194-16R
    This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. For example: instead of the instruction
    Bulletin Number: 15-195-16
    This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.
    Bulletin Number: 15-196-16
    Only those vehicles with Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not
    Bulletin Number: 15-196-16M
    Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may no
    Bulletin Number: 15-196-16M2
    Reminder: Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their serv
    Bulletin Number: 15-196-16R
    ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription con
    Bulletin Number: 15-196-16R
    TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-232-18
    This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
    Bulletin Number: 16-102-16
    TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.
    Bulletin Number: 16-103-16
    Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 1610417
    CVT MODELS ONLY. This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a ?bump? feeling from the CVT. The bump feeling has been reported to
    Bulletin Number: 16-104-17R
    This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a "bump" feeling from the CVT. The bump feeling has been reported to occur after the C
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 16-120-19
    This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i
    Bulletin Number: 16-124-19
    This Service Information Bulletin announces a design change to the CVT torque converter assembly made to address a small number of reports describing a squeaking -type sound heard while the engine is being cranked over. The sound results fr
    Bulletin Number: 16-97-15
    THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT
    Bulletin Number: 16-99-16
    "THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE TRANSMISSION CONTROL MODULE (TCM) OPERATION AND ADDRESS THE FOLLOWING CUSTOMER CONCERNS: ENGINE RPM FLARE (SHARP RPM INCREASE WHEN CVT DOWNSHIFTS) WHEN USING CR
    Bulletin Number: 16-99-16
    This bulletin announces availability of reprogramming files to optimize transmission control module (TCM) operation and address the following customer concerns: ? Engine RPM ?flare? (sharp RPM increase when CVT ?downshifts?) when using cru
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-183-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-184-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-186-16
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-192-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-194-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: Special Service
    The following special tool is required for servicing the 2015-2017MY Legacy and Outback Electronic Power Steering (EPS) rack assembly. This tool will be shipped directly to all Subaru retailers during September. Please reference TSB 04-1
    Bulletin Number: SSLP-R
    Subaru is pleased to announce an enhancement to the Subaru Service Loaner Program daily reimbursement rate. The new reimbursement rate will be $40/day and takes effect retroactively back to May 9, 2016 to align with the announcement of the
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WE
    SUBARU OF AMERICA, INC. WILL BE ISSUING A WARRANTY EXTENSION TO ADDRESS CRACKS OR BREAKAGE IN THE DEICER AREA OF THE WINDSHIELD ON 2015 AND EARLY PRODUCTION 2016 LEGACY AND OUTBACK MODELS EQUIPPED WITH THE ALL WEATHER PACKAGE THAT INCLUDED
    Bulletin Number: WEA
    IN AN EFFORT TO CLARIFY INFORMATION CONTAINED IN THE WINDSHIELD WARRANTY EXTENSION TSB #12‐192‐15 DATED 10/12/2015, PLEASE REVIEW THE FOLLOWING:  REPAIRS COVERED UNDER THIS WARRANTY EXTENSION ARE NOT SUBJECT TO THE $50
    Bulletin Number: WQU-56A2
    "UPDATE: SUBARU RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT-BULLETIN PLEASE BE ADVISED THAT THE PRODUCT CAMPAIGN BULLETIN FOR WQU-56 HAS BEEN POSTED ON STIS. THE BULLETIN INCLUDES DETAILED INFORMATION REGARDING THE PARTS SHIPMENTS AND THE REPA
    Bulletin Number: WQU-56R
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES.
    Bulletin Number: WQU-56R
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES. DURING THE MANUFACTURING PROCESS OF THE PROPELLER SHAFT THAT CONNECTS TO THE VEHICLES TRANSMISSION, THE SEAL CAP AND SEAL LOCATED I
    Bulletin Number: WQU56R
    Reminder Bulletin: WQU56 Recall: Propeller Shaft Oil Seal Failure. During the manufacturing process of the propeller shaft that connects to the vehicle?s transmission, the seal cap and seal located inside the propeller shaft yoke may have
    Bulletin Number: WQU-56U
    RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT PARTS SUPPLY UPDATE. PROPELLER SHAFT SHIPMENT QUANTITIES TO COVER ALL AFFECTED VEHICLES RETAILED PRIOR TO AUGUST 4TH STOP SALE WILL BE COMPLETED THIS WEEK. YOUR SOA ZONE OFFICE HAS BEEN PROVIDED THE
    Bulletin Number: WQU-56U2
    ALL SHIPMENTS FOR THE WQU56 RECALL ARE COMPLETE. SOME RETAILERS HAVE PLACED ORDERS IN THE SYSTEM FOR THESE PARTS. WE WILL BE REMOVING THE HOLD AGAINST THE PROPELLER SHAFTS ON MONDAY, AUGUST 31, 2015. IF YOU HAVE PLACED AN ORDER FOR A PROPE
    Bulletin Number: WQU-56U3
    UPDATE ] SUBARU RECALL CAMPAIGN: WQU]56 PROPELLER SHAFT OWNER NOTIFICATION OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY, AND EMAILS TO OWNERS WILL FOLLOW EARLY NEXT WEEK. SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2
    Bulletin Number: WQU-56A
    SUBJECT: NEW SUBARU RECALL CAMPAIGN: WQU]56 PROPELLER SHAFT. SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES.
    Bulletin Number: WQV-57
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL.
    Bulletin Number: WQV57U
    UPDATE - SUBARU RECALL CAMPAIGN: WQV57 PROPELLER SHAFT ATTACHING BOLT TORQUE OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY AFFECTED VIN LISTS WILL BE DISTRIBUTED TO THE REGIONAL OFFICES EMAILS WILL BE SENT TO OWNERS WITH A VALID
    Bulletin Number: WTD-65
    PRODUCT CAMPAIGN BULLETIN - Inspection and Repair Procedure for Stop Sale / Recall Campaign WTD-65: Steering Column
    Bulletin Number: WTD65AP
    Subaru has decided to loosen the restrictions on the $250 PAR allowance and let retailers decide on extenuating circumstances, including for customers that were inconvenienced by the inspection only and for customers that had to wait to pur
    Bulletin Number: WTD65AUI
    WTD-65 Stop Sale and Recall - Urgent Additional Information Urgent request for retailers to re-contact customers owning these cars: Provided just prior to 4:00 PM ET today. Also, update to "Inspection and repair procedures document," dis
    Bulletin Number: WTD65-C
    This is to clarify the recent message announcing an increase specific to the labor time and rental amounts for the WTD65 recall. While this increase is retroactive to the beginning of this recall, the low volume of claims that were entered
    Bulletin Number: WTD-65CG
    Some good news! Subaru of America has decided to arrange a gift for each customer that was driving an impacted sold unit at the start of this recall. For customers that do not have an added security maintenance plan, we will be providing
    Bulletin Number: WTD65-F
    WTD-65 Steering Column Recall - Fleet Vehicles Information
    Bulletin Number: WTD65-LC
    WTD65 Recall. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LC2
    WTD65 Recall. Revised reimbursement amount. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LC3
    WTD65 Recall. 2nd revision reimbursement amount. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LO
    A new labor operation has been created specifically for H6 vehicles affected by WTD-65 Steering Column Inspection/Repair. This labor operation has been added to the WTD-65R bulletin located in STIS. (A165-803 - 1.8 for H6 Models) SOA will r
    Bulletin Number: WTD-65M
    Memo: Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional step
    Bulletin Number: WTD65M1
    Memo: Stop Sale and Recall - WTD-65 Steering Column Shaft - Inspection and Repair Procedures
    Bulletin Number: WTD-65M2
    Memo: Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional step
    Bulletin Number: WTD65-OF
    WTD-65 Time and Mileage Reimbursement for Off-Site Inspections
    Bulletin Number: WTD65-OL
    Owner Letter - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the driver would
    Bulletin Number: WTD65-OLM
    Owner Letter - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the driver would
    Bulletin Number: WTD65OP
    WTD-65 Steering Column Recall - Ordering Process memo. Due to the substantial shipments which were processed this past weekend and an expected ample supply of incoming steering columns, the ordering restriction will be removed on Wednesday
    Bulletin Number: WTD65-PLT
    WTD-65 Steering Column Recall - Updates on Parts Supply, Loaner Cars and Towing
    Bulletin Number: WTD65-PSU
    Through the weekend we have shipped 17,346 steering columns, which represents 67% of the total sold vehicles. In fact, 1,355 steering columns were delivered to retailers this Saturday, another 1,712 will be delivered today, and another 3,00
    Bulletin Number: WTD-65R
    REPAIR PROCEDURE - This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacing the steering column assembly.
    Bulletin Number: WTD65R
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R2
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R3
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R4
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R5
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R6
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R6-02
    Additional Customer Accomodations for the WTD65 Recall- 2016 Legacy / Outback Steering Column repair.
    Bulletin Number: WTD65-RA
    WTD-65 Rental Authorization Form. Due to large volume of rental requests for WTD65, the attached Excel form can be used as an alternative to calling the PICS for a WTD-65 Rental Authorization.
    Bulletin Number: WTD-65RAU
    WTD-65 Rental Authorization Form- No longer needed.. Due to large volume of rental requests for WTD65 and administrative time, the rental authorization form is no longer required.
    Bulletin Number: WTD65-RM
    Retailer Memo posted re: NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the dr
    Bulletin Number: WTD65-RM2
    Revised Retailer Memo posted re: NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving
    Bulletin Number: WTD65-RS
    UPDATE: Subaru Recall Campaign: WTD-65 Steering Column - Roadside Assistance Policy. As an update to our Roadside Assistance Program policy, we will cover towing charges to the closest retailer or to the selling retailer. Likewise, if Suba
    Bulletin Number: WTD65-SP
    Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacin
    Bulletin Number: WTD65-SP2
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD65-SPM
    Memo: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacing the steering column
    Bulletin Number: WTD65-SS
    IMMEDIATE STOP SALE ORDER - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the
    Bulletin Number: WTD65TC
    It has been brought to our attention that some retailers are receiving invoices for towing charges after the initial claim submission for the WTD65 Steering Column recall. This is a reminder that approved and paid claims can be appended by
    Bulletin Number: WTD65UI
    The following is to provide you with updated information on the WTD 65 recall. 1. We are pleased to announce that based upon retailer input and comments, along with further study and analysis by FHI and SOA, we are increasing the labor
    Bulletin Number: WUB-87
    Subaru of America, Inc. (Subaru) is initiating a service campaign for certain 2015-2018 Legacy and Outback 2.5L SULEV vehicles. This campaign involves replacement of the front exhaust pipe assembly, which includes the catalytic converter. D
    Bulletin Number: WUB87-Announceme
    Subarunet Aunouncement: Subaru of America, Inc. (Subaru) is initiating a service campaign/voluntary emissions recall for certain 2015-2018 model year Legacy and Outback SULEV (Super Ultra Low Emissions Vehicle) vehicles. This will affect 2,
    2016 SUBARU OUTBACK
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-134-12R
    The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-164-16
    This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-171-18R
    This bulletin provides a service procedure for installation of additional foam packing to enhance performance of the Ambient Air Temperature Sensor. The additional foam better insulates the sensor from engine compartment heat which may lead
    Bulletin Number: 02-177-18
    In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 03-67-12R
    SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI
    Bulletin Number: 03-69-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 04-17-17-R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) gear box (steering rack) assembly. The repair (when applicable) involves inst
    Bulletin Number: 04-17-17R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) rack assembly. The repair involves installation of a new tension spring for
    Bulletin Number: 05-55-13
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 05-55-13
    THIS BULLETIN PROVIDES INFORMATION REGARDING A RUNNING CHANGE TO THE TIRES BEING USED IN PRODUCTION ON 2013MY AND LATER OUTBACK. THE ILLUSTRATIONS BELOW ARE PROVIDED FOR REFERENCE.
    Bulletin Number: 05-64-18
    This Service Information bulletin announces a change made to the rear frame stay mounting flange bolts. The new flange bolts (5 used per side) have been lengthened by 2mm to an overall length of 25mm.
    Bulletin Number: 05-67-19
    This bulletin announces a slight design change made to the sealing areas of the wheel hub assemblies for the models as listed above. The change was made to enhance productivity during the vehicle assembly process.
    Bulletin Number: 06-63-18R
    This bulletin announces a design change to the EPB adapter cord harness connector. In some cases, the retaining tab of the connector may become damaged as a result of removal or installation for diagnosis and later and cause DTC C1956 or C1
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 06-69-19R
    This bulletin announces a design change made to the rear ABS wheel speed sensor on the models listed above. The change involves the addition of an additional shielding cover to protect the harness from damage caused by road debris.
    Bulletin Number: 06-70-19
    This bulletin announces a change to the operating software included in the Vehicle Dynamic Control (VDC) Control Module and Hydraulic Unit (VDCCM&H/U) on the models listed above. This change is in response to a very small number of customer
    Bulletin Number: 07-103-15
    THIS SERVICE INFORMATION BULLETIN ANNOUNCES A NEW REQUIREMENT REGARDING ONE-TIME USE PARTS WHICH MUST REPLACED WHENEVER DISCONNECTING OR REPLACING THE PRG ROD. THE SPRING STEEL RETAINING CLIPS (STOP RINGS) WHICH LOCK THE PRG ROD TO THE BALL
    Bulletin Number: 07-106-16
    THIS BULLETIN ANNOUNCES A CHANGE TO THE BATTERY SENSOR TO PREVENT UNNECESSARY OCCURRENCE OF DTC P1C00 BEING SET / STORED IN THE ECM MEMORY.
    Bulletin Number: 07-113-16
    This bulletin announces a design change to the PRG mechanism in response to a small number of customer concerns regarding a gear-clash or grinding -type sound heard when opening or closing the rear gate. A material change and revised torque
    Bulletin Number: 07-114-16
    This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. When pressing the buttons to recall one of the last seat positions memor
    Bulletin Number: 07-114-16R
    This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. When pressing the buttons to recall one of the last seat positions mem
    Bulletin Number: 07-127-18
    This bulletin announces a design change to the power rear gate (PRG) rod. The new rod will address isolated cases of one end of the rod coming off the ball stud just as the latch releases and the gate starts to open / move.
    Bulletin Number: 07-127-18R
    This bulletin announces a design change to the power rear gate (PRG) rod. The new rod will address isolated cases of one end of the rod coming off the ball stud just as the latch releases and the gate starts to open / move.
    Bulletin Number: 07-131-18
    This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. VDC and/or
    Bulletin Number: 07-131-18R
    This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s (e. g. VDC and/or EyeSigh
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 07-153-19
    This service bulletin announces availability of the cap portion (a.k.a. spark plug boot) as a service part separate from the complete ignition coil assembly. If the cap portion as shown in the illustrations below is damaged during removal o
    Bulletin Number: 07-89-15R
    "IF YOU RECEIVE A CUSTOMER CONCERN OF A NO CRANK / NO START CONDITION DURING VERY COLD TEMPERATURES, THE IG1, IG2, ACC1, ACC2 AND/OR THE EGI MAIN RELAYS MAY BE THE ROOT CAUSE AND REQUIRE REPLACEMENT. IT IS GENERALLY REPORTED THAT THE CAR ST
    Bulletin Number: 07-89-15R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 09-61-15
    THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSS-SECTION ILLUSTRA
    Bulletin Number: 09-61-15R
    "THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSS-SECTION ILLUSTR
    Bulletin Number: 09-61-15R
    THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTIONS SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSSSECTION ILLUSTRAT
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-66-16
    This bulletin announces a change in the production procedure for the rear muffler assembly. Spot-weld locations securing the outer shell portion have been changed to improve overall rigidity. A gap may develop at the spot welded seam as a
    Bulletin Number: 10-90-19
    This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the ?pressed? position but not returning to ?flush? with
    Bulletin Number: 10-90-19R
    This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the âpressed❠position but not returning to âflushâ
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). * Potential battery discharge (dead batter
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: ? Check Engine light coming on (with DTC P05A0 stored in memory). ? Potential battery discharge (dead batter
    Bulletin Number: 11-176-17
    This bulletin announces availability of reprogramming files to optimize the ECM for control of battery charging functions. Depending on vehicle use conditions, the battery state of charge value may differ slightly from the actual value. T
    Bulletin Number: 11-181-18
    This bulletin announces availability of reprogramming files to optimize the ECM. These new files will address an idle drop condition which may occur when the A/C system switches off at low engine RPM during warm-up after a cold start.
    Bulletin Number: 12-135-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-137-12R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-164-14
    FILM RESIDUE REMOVAL FROM UNDERSIDE OF FRONT SEAT CUSHION COVERS
    Bulletin Number: 12-176-14R
    THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A WIND RUSHING-TYPE SOUND WHICH SEEMS TO COME FROM THE FRONT DOOR GLASS SASH AREA. CUSTOMERS MAY REPORT A CONCERN WITH ONE OR BOTH FRONT DOORS. IT IS ONLY NECESSARY
    Bulletin Number: 12-185-15R
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 12-185-15R
    THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A WIND RUSHING AND / OR FLUTTERING-TYPE SOUND ORIGINATING FROM THE B PILLAR AREA OF THE VEHICLE. THE SOUND IS USUALLY REPORTED TO BE MORE PREVALENT WHEN CROSSWINDS ARE PRESENT AND / OR
    Bulletin Number: 12-192-15
    SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. FURTHER INVESTIGATION HAS DETERMINED THE ROOT CAUSE FOR MANY OF THESE FAILURE
    Bulletin Number: 12-192-15R
    SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. FURTHER INVESTIGATION HAS DETERMINED THE ROOT CAUSE FOR MANY OF THESE FAILURE
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-196-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES DESIGN CHANGE INFORMATION REGARDING THE REAR GATE PANEL ASSEMBLY, THE REAR SPOILER ASSEMBLY AND THEIR INTERCHANGEABILITY.
    Bulletin Number: 12-203-16
    This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. A design change was made to the wave washer used at the attachment p
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-208-16
    This bulletin announces availability of new rear gate (PRG) stays designed to address customer concerns of other than expected PRG operation. The enhancement involves a change to the viscosity of the lubricant used for maintaining smooth op
    Bulletin Number: 12-216-17
    This bulletin announces a design change to the roof rail assemblies. This change has been made in response to isolated customer concerns of a visible gap between the base portion of the rail assembly and the roof panel as shown in the examp
    Bulletin Number: 12-218-17
    This bulletin provides supplemental information and an inspection point to use when diagnosing a wind rushing sound concern that persists on vehicles: * past the production change provided in TSB 12-176-14R, dated 10/28/2015 or * which h
    Bulletin Number: 12-219-17
    This bulletin provides new part information and an identification procedure to address a small number of vehicles identified with a sticking secondary hood latch mechanism. The hood latch mechanism is exposed to foreign materials during nor
    Bulletin Number: 12-246-18
    This bulletin provides a procedure for diagnosing and repairing customer concerns of a "popping" or "snapping" -type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip contacts or c
    Bulletin Number: 12-246-18R
    This bulletin provides a procedure for diagnosing and repairing customer concerns of a âpopping❠or âsnapping❠-type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip conta
    Bulletin Number: 12-253-18
    This bulletin provides a procedure to help identify the source of a squeaking, creaking or popping -type sound heard coming from the driver?s seat. A change has been made to the Teflon bushings used in the seat cushion frame assembly.
    Bulletin Number: 12-253-18R
    This bulletin provides a procedure to help identify the source of a squeaking, creaking or popping -type sound heard coming from the driver?s seat. A change has been made to the Teflon bushings used in the seat cushion frame assembly.
    Bulletin Number: 122565-122550
    Remote Engine Start Systems Trouble Shooting Guide
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-177-14R
    THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION GEN 2 F10 AUDIO / NAVIGATION SYSTEM. WE WILL CONTINUE TO ADD MORE HELPFUL
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-192-16
    SUMMARY TO BE PROVIDED ON A FUTURE DATE.
    Bulletin Number: 15-192-16
    THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF LOOSE OR GAPPING ACCESSORY FRONT WHEEL ARCH MOLDING(S) (E201SAL000 MOLDING KIT). THERE ARE 2 RETAINING CLIPS ON EACH MOLDING WHICH HAVE BEEN IMPROVED TO ENHANCE RETE
    Bulletin Number: 15-194-16
    "THIS BULLETIN ANNOUNCES AVAILABILITY OF AN ENHANCED AUDIO SYSTEM POWER AMPLIFIER WHICH CONTAINS SOFTWARE TO ADDRESS CUSTOMER CONCERNS OF VOICE GUIDANCE INSTRUCTIONS (WORDS) BEING CUT SHORT OR CUT OFF. FOR EXAMPLE: INSTEAD OF THE INSTRUCTIO
    Bulletin Number: 15-194-16
    This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. For example: instead of the instruction
    Bulletin Number: 15-194-16R
    Models Equipped with Navigation and Harman Kardon Power Amplifier Revised TSB. Fujitsu 10/ FTEN/ F10 Navigation Voice Guidance Instructions Getting Cut Off. This bulletin announces availability of an enhanced audio system power amplifier
    Bulletin Number: 15-194-16R
    This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. For example: instead of the instruction
    Bulletin Number: 15-195-16
    This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement.
    Bulletin Number: 15-196-16
    Only those vehicles with Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not
    Bulletin Number: 15-196-16M
    Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their services may no
    Bulletin Number: 15-196-16M2
    Reminder: Only those vehicles with Telematics. On Friday, April 15, 2016, a letter will be sent out to a select group of customers regarding their current SUBARU STARLINK subscription. The letter will inform the customer that their serv
    Bulletin Number: 15-196-16R
    ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription con
    Bulletin Number: 15-196-16R
    TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. VERY IMPORTANT: This procedure applies to vehicles with VINs shared with your retailer as
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-212-17
    ALL OUTBACKS AND 5-DOOR IMPREZA MODELS ONLY. This bulletin announces a design change of the tonneau cover assembly to address customer concerns of the handle portion coming loose. The handle has been changed to optimize retention and made
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-239-19
    This Service information bulletin announces a design change made to the Cargo Net ? Rear Replacement Hardware Kit (F551SAG301). The new part number is F551SAN010. The change was made to address concerns regarding the ?mushroom? anchors eith
    Bulletin Number: 16-102-16
    TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.
    Bulletin Number: 16-103-16
    Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 1610417
    CVT MODELS ONLY. This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a ?bump? feeling from the CVT. The bump feeling has been reported to
    Bulletin Number: 16-104-17R
    This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a "bump" feeling from the CVT. The bump feeling has been reported to occur after the C
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 16-120-19
    This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i
    Bulletin Number: 16-124-19
    This Service Information Bulletin announces a design change to the CVT torque converter assembly made to address a small number of reports describing a squeaking -type sound heard while the engine is being cranked over. The sound results fr
    Bulletin Number: 16-97-15
    THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT
    Bulletin Number: 16-99-16
    "THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE TRANSMISSION CONTROL MODULE (TCM) OPERATION AND ADDRESS THE FOLLOWING CUSTOMER CONCERNS: ENGINE RPM FLARE (SHARP RPM INCREASE WHEN CVT DOWNSHIFTS) WHEN USING CR
    Bulletin Number: 16-99-16
    This bulletin announces availability of reprogramming files to optimize transmission control module (TCM) operation and address the following customer concerns: ? Engine RPM ?flare? (sharp RPM increase when CVT ?downshifts?) when using cru
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-182-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-183-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-184-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-186-16
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-192-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-194-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: Special Service
    The following special tool is required for servicing the 2015-2017MY Legacy and Outback Electronic Power Steering (EPS) rack assembly. This tool will be shipped directly to all Subaru retailers during September. Please reference TSB 04-1
    Bulletin Number: SSLP-R
    Subaru is pleased to announce an enhancement to the Subaru Service Loaner Program daily reimbursement rate. The new reimbursement rate will be $40/day and takes effect retroactively back to May 9, 2016 to align with the announcement of the
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WE
    SUBARU OF AMERICA, INC. WILL BE ISSUING A WARRANTY EXTENSION TO ADDRESS CRACKS OR BREAKAGE IN THE DEICER AREA OF THE WINDSHIELD ON 2015 AND EARLY PRODUCTION 2016 LEGACY AND OUTBACK MODELS EQUIPPED WITH THE ALL WEATHER PACKAGE THAT INCLUDED
    Bulletin Number: WEA
    IN AN EFFORT TO CLARIFY INFORMATION CONTAINED IN THE WINDSHIELD WARRANTY EXTENSION TSB #12‐192‐15 DATED 10/12/2015, PLEASE REVIEW THE FOLLOWING:  REPAIRS COVERED UNDER THIS WARRANTY EXTENSION ARE NOT SUBJECT TO THE $50
    Bulletin Number: WQU-56A2
    "UPDATE: SUBARU RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT-BULLETIN PLEASE BE ADVISED THAT THE PRODUCT CAMPAIGN BULLETIN FOR WQU-56 HAS BEEN POSTED ON STIS. THE BULLETIN INCLUDES DETAILED INFORMATION REGARDING THE PARTS SHIPMENTS AND THE REPA
    Bulletin Number: WQU-56R
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES.
    Bulletin Number: WQU-56R
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES. DURING THE MANUFACTURING PROCESS OF THE PROPELLER SHAFT THAT CONNECTS TO THE VEHICLES TRANSMISSION, THE SEAL CAP AND SEAL LOCATED I
    Bulletin Number: WQU56R
    Reminder Bulletin: WQU56 Recall: Propeller Shaft Oil Seal Failure. During the manufacturing process of the propeller shaft that connects to the vehicle?s transmission, the seal cap and seal located inside the propeller shaft yoke may have
    Bulletin Number: WQU-56U
    RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT PARTS SUPPLY UPDATE. PROPELLER SHAFT SHIPMENT QUANTITIES TO COVER ALL AFFECTED VEHICLES RETAILED PRIOR TO AUGUST 4TH STOP SALE WILL BE COMPLETED THIS WEEK. YOUR SOA ZONE OFFICE HAS BEEN PROVIDED THE
    Bulletin Number: WQU-56U2
    ALL SHIPMENTS FOR THE WQU56 RECALL ARE COMPLETE. SOME RETAILERS HAVE PLACED ORDERS IN THE SYSTEM FOR THESE PARTS. WE WILL BE REMOVING THE HOLD AGAINST THE PROPELLER SHAFTS ON MONDAY, AUGUST 31, 2015. IF YOU HAVE PLACED AN ORDER FOR A PROPE
    Bulletin Number: WQU-56U3
    UPDATE ] SUBARU RECALL CAMPAIGN: WQU]56 PROPELLER SHAFT OWNER NOTIFICATION OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY, AND EMAILS TO OWNERS WILL FOLLOW EARLY NEXT WEEK. SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2
    Bulletin Number: WQU-56A
    SUBJECT: NEW SUBARU RECALL CAMPAIGN: WQU]56 PROPELLER SHAFT. SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES.
    Bulletin Number: WQV-57
    SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL.
    Bulletin Number: WQV57U
    UPDATE - SUBARU RECALL CAMPAIGN: WQV57 PROPELLER SHAFT ATTACHING BOLT TORQUE OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY AFFECTED VIN LISTS WILL BE DISTRIBUTED TO THE REGIONAL OFFICES EMAILS WILL BE SENT TO OWNERS WITH A VALID
    Bulletin Number: WTD-65
    PRODUCT CAMPAIGN BULLETIN - Inspection and Repair Procedure for Stop Sale / Recall Campaign WTD-65: Steering Column
    Bulletin Number: WTD65AP
    Subaru has decided to loosen the restrictions on the $250 PAR allowance and let retailers decide on extenuating circumstances, including for customers that were inconvenienced by the inspection only and for customers that had to wait to pur
    Bulletin Number: WTD65AUI
    WTD-65 Stop Sale and Recall - Urgent Additional Information Urgent request for retailers to re-contact customers owning these cars: Provided just prior to 4:00 PM ET today. Also, update to "Inspection and repair procedures document," dis
    Bulletin Number: WTD65-C
    This is to clarify the recent message announcing an increase specific to the labor time and rental amounts for the WTD65 recall. While this increase is retroactive to the beginning of this recall, the low volume of claims that were entered
    Bulletin Number: WTD-65CG
    Some good news! Subaru of America has decided to arrange a gift for each customer that was driving an impacted sold unit at the start of this recall. For customers that do not have an added security maintenance plan, we will be providing
    Bulletin Number: WTD65-F
    WTD-65 Steering Column Recall - Fleet Vehicles Information
    Bulletin Number: WTD65-LC
    WTD65 Recall. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LC2
    WTD65 Recall. Revised reimbursement amount. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LC3
    WTD65 Recall. 2nd revision reimbursement amount. As part of the current Stop Sale, Subaru of America, Inc. will assist retailers with a rental car reimbursement program.
    Bulletin Number: WTD65-LO
    A new labor operation has been created specifically for H6 vehicles affected by WTD-65 Steering Column Inspection/Repair. This labor operation has been added to the WTD-65R bulletin located in STIS. (A165-803 - 1.8 for H6 Models) SOA will r
    Bulletin Number: WTD-65M
    Memo: Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional step
    Bulletin Number: WTD65M1
    Memo: Stop Sale and Recall - WTD-65 Steering Column Shaft - Inspection and Repair Procedures
    Bulletin Number: WTD-65M2
    Memo: Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional step
    Bulletin Number: WTD65-OF
    WTD-65 Time and Mileage Reimbursement for Off-Site Inspections
    Bulletin Number: WTD65-OL
    Owner Letter - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the driver would
    Bulletin Number: WTD65-OLM
    Owner Letter - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the driver would
    Bulletin Number: WTD65OP
    WTD-65 Steering Column Recall - Ordering Process memo. Due to the substantial shipments which were processed this past weekend and an expected ample supply of incoming steering columns, the ordering restriction will be removed on Wednesday
    Bulletin Number: WTD65-PLT
    WTD-65 Steering Column Recall - Updates on Parts Supply, Loaner Cars and Towing
    Bulletin Number: WTD65-PSU
    Through the weekend we have shipped 17,346 steering columns, which represents 67% of the total sold vehicles. In fact, 1,355 steering columns were delivered to retailers this Saturday, another 1,712 will be delivered today, and another 3,00
    Bulletin Number: WTD-65R
    REPAIR PROCEDURE - This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacing the steering column assembly.
    Bulletin Number: WTD65R
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R2
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R3
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R4
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R5
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R6
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD-65R6-02
    Additional Customer Accomodations for the WTD65 Recall- 2016 Legacy / Outback Steering Column repair.
    Bulletin Number: WTD65-RA
    WTD-65 Rental Authorization Form. Due to large volume of rental requests for WTD65, the attached Excel form can be used as an alternative to calling the PICS for a WTD-65 Rental Authorization.
    Bulletin Number: WTD-65RAU
    WTD-65 Rental Authorization Form- No longer needed.. Due to large volume of rental requests for WTD65 and administrative time, the rental authorization form is no longer required.
    Bulletin Number: WTD65-RM
    Retailer Memo posted re: NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the dr
    Bulletin Number: WTD65-RM2
    Revised Retailer Memo posted re: NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving
    Bulletin Number: WTD65-RS
    UPDATE: Subaru Recall Campaign: WTD-65 Steering Column - Roadside Assistance Policy. As an update to our Roadside Assistance Program policy, we will cover towing charges to the closest retailer or to the selling retailer. Likewise, if Suba
    Bulletin Number: WTD65-SP
    Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacin
    Bulletin Number: WTD65-SP2
    Revised Service Procedure Bulletin: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for
    Bulletin Number: WTD65-SPM
    Memo: 2016 Legacy / Outback Stop Sale Information, WTD-65 Recall. This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacing the steering column
    Bulletin Number: WTD65-SS
    IMMEDIATE STOP SALE ORDER - NEW RECALL CAMPAIGN WTD-65. The steering column in affected vehicles may not have been manufactured to specification. This could allow the steering column to disengage. If this were to happen while driving, the
    Bulletin Number: WTD65TC
    It has been brought to our attention that some retailers are receiving invoices for towing charges after the initial claim submission for the WTD65 Steering Column recall. This is a reminder that approved and paid claims can be appended by
    Bulletin Number: WTD65UI
    The following is to provide you with updated information on the WTD 65 recall. 1. We are pleased to announce that based upon retailer input and comments, along with further study and analysis by FHI and SOA, we are increasing the labor
    Bulletin Number: WUB-87
    Subaru of America, Inc. (Subaru) is initiating a service campaign for certain 2015-2018 Legacy and Outback 2.5L SULEV vehicles. This campaign involves replacement of the front exhaust pipe assembly, which includes the catalytic converter. D
    Bulletin Number: WUB87-Announceme
    Subarunet Aunouncement: Subaru of America, Inc. (Subaru) is initiating a service campaign/voluntary emissions recall for certain 2015-2018 model year Legacy and Outback SULEV (Super Ultra Low Emissions Vehicle) vehicles. This will affect 2,
    2016 SUBARU WRX
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-134-12R
    The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-163-16R
    This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t
    Bulletin Number: 02-164-16
    This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
    Bulletin Number: 02-166-17
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-166-17R
    This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis
    Bulletin Number: 02-168-17
    This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.
    Bulletin Number: 02-170-17
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co
    Bulletin Number: 02-170-17R
    This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn
    Bulletin Number: 02-173-18
    2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.
    Bulletin Number: 02-173-18
    2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrences of ice formation from condensation in the duct?s PCV system passages.
    Bulletin Number: 02-178-18
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 02-182-19
    This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and be
    Bulletin Number: 03-79-18R
    This bulletin announces a change to the clutch system components optimizing their durability and resistance to certain severe driving conditions including high-temperature operation.
    Bulletin Number: 03-82-18
    This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases
    Bulletin Number: 04-17-17-R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) gear box (steering rack) assembly. The repair (when applicable) involves inst
    Bulletin Number: 04-17-17R
    This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) rack assembly. The repair involves installation of a new tension spring for
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 06-59-17R
    This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design
    Bulletin Number: 06-61-18
    This bulletin announces availability of new VDC Control Module & Hydraulic Units (VDCCM&H/U) to address isolated customer concerns of the green Hill Holder light blinking and cancel warning alarm sounding during cranking / starting the
    Bulletin Number: 06-63-18R
    This bulletin announces a design change to the EPB adapter cord harness connector. In some cases, the retaining tab of the connector may become damaged as a result of removal or installation for diagnosis and later and cause DTC C1956 or C1
    Bulletin Number: 06-65-18
    This bulletin announces a new Vehicle Dynamics Control (VDC) Module and Hydraulic Control Unit (VDCCM&HCU). The new part was designed to address a small number of customer concerns regarding a clicking or ticking-type sound heard coming fro
    Bulletin Number: 06-65-18R
    This bulletin announces a new Vehicle Dynamics Control (VDC) Module and Hydraulic Control Unit (VDCCM&HCU). The new part was designed to address a small number of customer concerns regarding a clicking or ticking-type sound heard coming fro
    Bulletin Number: 06-66-18
    This Service Information bulletin announces a design change made to the front brake rotors used on the models listed above. The change makes it easier to identify these parts from those used on other models.
    Bulletin Number: 06-68-19
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 06-68-19R
    This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o
    Bulletin Number: 07-100-15
    THIS BULLETIN ANNOUNCES THE AVAILABILITY OF REPROGRAMMING FILES FOR THE EYESIGHT SYSTEM TO PROVIDE PROPER FUNCTION OF THE VEHICLE INFORMATION REGISTRATION MENU. IN RARE CASES, WHEN ATTEMPTING TO PERFORM THE CAMERA INITIALIZATION PROCEDURE A
    Bulletin Number: 07-106-16
    THIS BULLETIN ANNOUNCES A CHANGE TO THE BATTERY SENSOR TO PREVENT UNNECESSARY OCCURRENCE OF DTC P1C00 BEING SET / STORED IN THE ECM MEMORY.
    Bulletin Number: 07-111-16
    This bulletin announces a design change to the headlamp assembly to improve sealing and prevent moisture intrusion. This condition may result from a slight misalignment of the attaching points during the headlamp assembly process. An improv
    Bulletin Number: 07-118-17R
    Models with SRVD Only. This bulletin provides revised diagnostic and repair procedures to address DTC B2327 for the Subaru Rear Vehicle Detection (SRVD), Blind-Spot Detection (BSD) and Rear Cross Traffic Alert (RCTA) system on the applica
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system
    Bulletin Number: 07-128-18R
    This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s
    Bulletin Number: 07-133-18
    2.0L Turbor Models only. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may
    Bulletin Number: 07-133-18
    This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso
    Bulletin Number: 07-134-18
    This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cu
    Bulletin Number: 07-139-18R
    This bulletin outlines a design change made to the inner lens extension portion of the LED headlamp assembly. Under the right conditions, the shape of the lens for the actual head lamp light source can cause sunlight to be focused onto the
    Bulletin Number: 07-146-19
    This bulletin announces a design change made to the engine wiring harness to improve resistance to moisture. A detailed illustration describing the change is supplied below.
    Bulletin Number: 07-150-19
    This bulletin provides a procedure for replacing the rear combination lamp wiring harness. The harness is now available as a service part separate from the lamp assembly.
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 07-75-13R
    On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back ?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate
    Bulletin Number: 07-75-13R
    This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. The engine management system is equipped with a back-up memory. When disconnecting t
    Bulletin Number: 07-99-15
    ON SOME VEHICLES, A CUSTOMER MAY NOT BE ABLE TO ACCESS THE KEYLESS BUZZER VOLUME FUNCTION ON THE MULTI-FUNCTION DISPLAY (MFD). THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR THE BODY INTEGRATED UNIT (BIU) TO FACILITATE SE
    Bulletin Number: 08-39-15
    THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-64-16
    This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T
    Bulletin Number: 09-65-16
    This bulletin announces a design change of the fuel injector used on 2.0L DIT models to prevent water intrusion. A new silicone rubber cover has been developed and incorporated into production for this purpose.
    Bulletin Number: 096516R
    REVISED. This bulletin announces a design change of the fuel injector used on 2.0L DIT models to prevent water intrusion. A new silicone rubber cover has been developed and incorporated into production for this purpose.
    Bulletin Number: 10-84-16
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-84-16R
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-86-17R
    A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.
    Bulletin Number: 10-88-18
    This bulletin announces a change made to the Automatic Climate Control Head Assembly. The change will address concerns where the temperature selected for cooling ?feels? warmer to the customer than the temperature displayed. The new progr
    Bulletin Number: 11-170-16
    2.0L DIT Models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address a customer concern of the Check Engine Light illuminating as a result of DTC P2270 being stored in t
    Bulletin Number: 1117117
    This bulletin announces the availability of reprogramming files to optimize the ECM and address isolated customer concerns of a spark knock (engine ping) -type sound.
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). * Potential battery discharge (dead batter
    Bulletin Number: 11-174-17R
    This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: ? Check Engine light coming on (with DTC P05A0 stored in memory). ? Potential battery discharge (dead batter
    Bulletin Number: 11-191-19
    This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: âECM/PCM ENGINE OFF TIMER PERFORMANCEâ. Under certain RARE conditions, an electrostatic surge may influ
    Bulletin Number: 11-191-19R
    This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: âECM/PCM ENGINE OFF TIMER PERFORMANCEâ. Under certain RARE conditions, an electrostatic surge may influ
    Bulletin Number: 12-182-15R
    This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added.
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: ? the mounting
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: * the mounting p
    Bulletin Number: 12-190-15R
    THIS BULLETIN PROVIDES A PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A CREAKING SOUND HEARD WHEN OPERATING THE CLUTCH PEDAL. THE CAUSE OF THE SOUND HAS BEEN IDENTIFIED AS A VERY SLIGHT AMOUNT OF MOVEMENT BETWEEN THE 2 LAYERS OF METAL (CIRCLED
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-201-16
    Paint Chipping between Hood Grille (Scoop) and Hood - This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown i
    Bulletin Number: 12-201-16R
    IMPORTANT: This Service Bulletin has been as been replaced by TSB 12-243-18 dated 6/6/2018 entitled ?Paint Chipping between Hood Grille (Scoop) and Hood?. Please refer to this new bulletin for the latest information regarding this condition
    Bulletin Number: 12-201-16R
    This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo below. Due to different expansion rates be
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-207-16
    This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the w
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be
    Bulletin Number: 12-238-18R
    This bulletin announces a design change to the front door checkers used on the models listed. The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed.
    Bulletin Number: 12-241-18
    4 DOOR MODELS ONLY. This bulletin announces a change made to the trunk lid lock (latch) assembly. The purpose of this change is to improve parts integration (or ?commonality?) between models. This change is not intended to address any sp
    Bulletin Number: 12-243-18
    This bulletin replaces TSB 12-201-16R and provides a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo. Due to different expansion rates between the me
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 12-264-19
    This Service Information bulletin announces a design change made to the retaining bolt used to secure the child anchors to the rear shelf plates on the models listed above. This change was made in support of parts communization with other s
    Bulletin Number: 12-271-19
    This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. Thi
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when
    Bulletin Number: 15-177-14R
    ONLY MODELS with AVN Navigation or Display Audio system. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-182-15R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-182-15R
    This bulletin announces a procedure for updating the navigation / audio unit's operating system software for various customer concerns.
    Bulletin Number: 15-182-15R
    THIS BULLETIN ANNOUNCES A PROCEDURE FOR UPDATING THE NAVIGATION / AUDIO UNITS OPERATING SYSTEM SOFTWARE. THE FOLLOWING LIST OF SYMPTOMS AND RELATED CHANGES PROVIDES A BRIEF DESCRIPTION OF WHICH CUSTOMER CONCERNS THE UPDATES ARE INTENDED TO
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-198-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7?
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-198-16R
    Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display Audio
    Bulletin Number: 15-198-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7"
    Bulletin Number: 15-199-16
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display
    Bulletin Number: 15-199-16R
    This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.
    Bulletin Number: 15-200-16
    Models with Fujitsu-TEN / FTEN / (F10) Gen2 Navigation System only. Fujitsu-TEN / FTEN / (F10) Navigation: Voice Recognition Concerns with Finding Addresses in Some Metro Areas.
    Bulletin Number: 15-205-16
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update fi
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio uni
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units
    Bulletin Number: 15-205-16R
    This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving âGen 2❠F10 Navigation and Display Audio u
    Bulletin Number: 15-206-16
    USB Device Not Recognized on Fujitsu-Ten (F10) 7? Display Navigation and Display Audio Units. This bulletin announces availability of a new auxiliary USB unit to address customer concerns where the 7? Display Audio or Audio Navigation he
    Bulletin Number: 15-207-16
    This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-222-18
    This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio
    Bulletin Number: 15-232-18
    This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
    Bulletin Number: 16-103-16
    Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'
    Bulletin Number: 16-103-16R
    This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s
    Bulletin Number: 16-103-16R
    "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ
    Bulletin Number: 16-112-18R
    This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati
    Bulletin Number: 16-115-18
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model years from the origi
    Bulletin Number: 16-119-19
    This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a
    Bulletin Number: 16-120-19
    This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i
    Bulletin Number: 16-98-16
    THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR OPTIMIZATION OF THE TRANSMISSION CONTROL MODULE (TCM). THE NEW LOGIC ADDRESSES CUSTOMER CONCERNS OF INCONSISTENT SHIFTING CHARACTERISTICS AND / OR A SLIPPING -TYPE SENSATION
    Bulletin Number: 169816
    This bulletin announces availability of reprogramming files for optimization of the transmission control module (TCM). The new logic addresses customer concerns of inconsistent shifting characteristics and / or a ?slipping? -type sensatio
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-182-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-183-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-186-16
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-192-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: SB-WQS-54
    SUBARU: TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. IN CERTAIN VEHICLES THERE IS A DELAYED IN DETECTING A FAILURE OF BRAKE LAMP SWITCH (BLS) BY DRIVER ASSIST SYSTEM AND TAKES LONGER FOR VEHICLE DYNAM
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    Bulletin Number: UPDATE - Removal
    The corrected update files are now available for download from Subarunet. TSB 15-20516R has been revised with new file names where applicable and re-posted to STIS.
    Bulletin Number: WQS-54A
    Subaru of America, Inc. (Subaru) is recalling certain vehicles equipped with a driver assist system The programming of the driver assist system will not detect a fault in one of the associated system components. In the event of brake lamp s
    Bulletin Number: WQS-54RP
    Subaru of America, Inc. (SOA) is recalling certain 2015 model year Subaru Legacy, Subaru Outback, Subaru Impreza (4Door and 5Door) and Subaru XV Crosstrek vehicles and certain 2016MY Subaru WRX vehicles equipped with a Driver Assist System.
    Bulletin Number: WQS 54U
    The WQS?54 Repair Procedure Bulletin has been posted on STIS. Coverage information for all affected Stop?Sale vehicles is available on subarunet.com. Subaru of America, Inc. (Subaru) is recalling certain vehicles equipped with a driver ass
    Bulletin Number: WQS-54U
    "OWNER NOTIFICATION - SUBARU RECALL CAMPAIGN: WQS-54 DRIVER ASSIST SYSTEM (EYESIGHT) DELAY IN WARNING INDICATOR OWNER NOTIFICATION SUBARU WILL NOTIFY POTENTIALLY AFFECTED VEHICLE OWNERS BY FIRST CLASS MAIL. OWNER NOTIFICATION WILL BEGIN
    Bulletin Number: WTA-62
    Turbo models only. Subject: Update ? Subaru Safety Recall Campaign/ STOP SALE: WTA?62 Turbo Engine Air Intake Duct. Owner Notification: All potentially affected vehicle owners will be notified by first class mail on or around April 15, 2
    Bulletin Number: WTA-62A
    Turbo models only. Service Procedure Bulletin. The repair procedure will involve inspecting and possibly replacing the turbocharger air intake duct. Inspection of the turbocharger air intake duct lot number (date) molded on the duct will be
    Bulletin Number: WTA-62SS
    Subaru Safety Recall Campaign/ STOP SALE: WTA?62 Turbo Engine Air Intake Duct. The turbocharger air intake duct on affected vehicles may have been produced with incorrect material that is susceptible to cracking.
    Bulletin Number: WUE-90 tool
    SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
    2016 SUBARU WRX STI
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-164-16
    This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
    Bulletin Number: 02-172-18R
    This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material whi
    Bulletin Number: 02-172-18R
    This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material whic
    Bulletin Number: 02-178-18
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 02-178-18R
    This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
    Bulletin Number: 02-179-18
    This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI.
    Bulletin Number: 02-181-19
    In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the turbocharged 2.5L ?EJ? short block assembly used in the above listed models and model years from t
    Bulletin Number: 05-61-16
    This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
    Bulletin Number: 06-63-18R
    This bulletin announces a design change to the EPB adapter cord harness connector. In some cases, the retaining tab of the connector may become damaged as a result of removal or installation for diagnosis and later and cause DTC C1956 or C1
    Bulletin Number: 06-65-18
    This bulletin announces a new Vehicle Dynamics Control (VDC) Module and Hydraulic Control Unit (VDCCM&HCU). The new part was designed to address a small number of customer concerns regarding a clicking or ticking-type sound heard coming fro
    Bulletin Number: 06-65-18R
    This bulletin announces a new Vehicle Dynamics Control (VDC) Module and Hydraulic Control Unit (VDCCM&HCU). The new part was designed to address a small number of customer concerns regarding a clicking or ticking-type sound heard coming fro
    Bulletin Number: 07-111-16
    This bulletin announces a design change to the headlamp assembly to improve sealing and prevent moisture intrusion. This condition may result from a slight misalignment of the attaching points during the headlamp assembly process. An improv
    Bulletin Number: 07-139-18R
    This bulletin outlines a design change made to the inner lens extension portion of the LED headlamp assembly. Under the right conditions, the shape of the lens for the actual head lamp light source can cause sunlight to be focused onto the
    Bulletin Number: 07-152-19
    This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re
    Bulletin Number: 07-152-19R
    "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl
    Bulletin Number: 07-99-15
    ON SOME VEHICLES, A CUSTOMER MAY NOT BE ABLE TO ACCESS THE KEYLESS BUZZER VOLUME FUNCTION ON THE MULTI-FUNCTION DISPLAY (MFD). THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR THE BODY INTEGRATED UNIT (BIU) TO FACILITATE SE
    Bulletin Number: 09-63-16
    THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.
    Bulletin Number: 09-64-16
    This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T
    Bulletin Number: 10-84-16
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-84-16R
    This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate
    Bulletin Number: 10-86-17R
    A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.
    Bulletin Number: 10-88-18
    This bulletin announces a change made to the Automatic Climate Control Head Assembly. The change will address concerns where the temperature selected for cooling ?feels? warmer to the customer than the temperature displayed. The new progr
    Bulletin Number: 11-163-16
    This bulletin announces availability of reprogramming files for optimization of the ECM. The files will address customer concerns of a lack of engine power output resulting from reduced turbocharger boost at high ambient temperatures while
    Bulletin Number: 12-182-15R
    This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added.
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: ? the mounting
    Bulletin Number: 12-189-15R
    This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: * the mounting p
    Bulletin Number: 12-190-15R
    THIS BULLETIN PROVIDES A PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A CREAKING SOUND HEARD WHEN OPERATING THE CLUTCH PEDAL. THE CAUSE OF THE SOUND HAS BEEN IDENTIFIED AS A VERY SLIGHT AMOUNT OF MOVEMENT BETWEEN THE 2 LAYERS OF METAL (CIRCLED
    Bulletin Number: 12-195-15
    SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S
    Bulletin Number: 12-201-16
    Paint Chipping between Hood Grille (Scoop) and Hood - This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown i
    Bulletin Number: 12-201-16R
    IMPORTANT: This Service Bulletin has been as been replaced by TSB 12-243-18 dated 6/6/2018 entitled ?Paint Chipping between Hood Grille (Scoop) and Hood?. Please refer to this new bulletin for the latest information regarding this condition
    Bulletin Number: 12-201-16R
    This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo below. Due to different expansion rates be
    Bulletin Number: 12-206-16
    All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies.
    Bulletin Number: 12-207-16
    This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the w
    Bulletin Number: 12-231-18
    ( 2017-2018MY Impreza - 5 Dr Only)
    Bulletin Number: 12-231-18R
    This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi
    Bulletin Number: 12-234-18
    This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be
    Bulletin Number: 12-238-18R
    This bulletin announces a design change to the front door checkers used on the models listed. The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed.
    Bulletin Number: 12-243-18
    This bulletin replaces TSB 12-201-16R and provides a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo. Due to different expansion rates between the me
    Bulletin Number: 12-251-18
    This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There
    Bulletin Number: 12-264-19
    This Service Information bulletin announces a design change made to the retaining bolt used to secure the child anchors to the rear shelf plates on the models listed above. This change was made in support of parts communization with other s
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14M
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T
    Bulletin Number: 15-177-14M2
    When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi
    Bulletin Number: 15-177-14R
    Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie
    Bulletin Number: 15-190-15R
    This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch
    Bulletin Number: 15-197-16
    Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m
    Bulletin Number: 15-200-16
    Models with Fujitsu-TEN / FTEN / (F10) Gen2 Navigation System only. Fujitsu-TEN / FTEN / (F10) Navigation: Voice Recognition Concerns with Finding Addresses in Some Metro Areas.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units.
    Bulletin Number: 15-208-17R
    This Service Information bulletin announces availability of an enhancement to the Gracenote database included in the vehicles listed above equipped with F10 7? Navigation and 7? Display Audio head units. When the user plays a pre-recorded C
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 15-222-18
    This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio
    Bulletin Number: 17-17-13R
    NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i
    Bulletin Number: 17-17-13R
    This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
    Bulletin Number: 18-183-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: 18-186-16
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-192-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: 18-195-18
    The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec
    Bulletin Number: F10-Gen2-NAV-15-
    TECHNICAL SUPPORT GUIDE FOR NAVIGATION AND AUDIO F10 GEN2 SYSTEMS.
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    2016 SUBARU XV CROSSTREK
    Bulletin Number: 01-168-09R
    Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 02-162-15
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 02-162-15R
    "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C
    Bulletin Number: 07-107-16
    THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE THE DRIVE MOTOR CONTROL MODULE (DMCM), PART OF THE HYBRID ELECTRICAL SYSTEM. IN RARE CASES, IF THE OPERATOR CYCLES THE IGNITION OFF THEN BACK ON AGAIN WITHIN A VERY SHO
    Bulletin Number: 07-134-18
    This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Following these diagnostic steps will help avoid unnecessary ODS sensor / seat cu
    Bulletin Number: 11-180-18
    HYBRID MODELS ONLY. This bulletin announces the availability of reprogramming files to optimize the ECM and address DTCs P0A78 and P1C2A. When either of these DTCs is stored, the Hybrid / HEV functions are inoperative. The new logic will
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 15-198-16R
    IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition.
    Bulletin Number: 15-215-18
    Models with FujitsuTEN (F10) Gen 2.0 / 2.1 Navigation or Display Audio Head Units ONLY. This bulletin provides a repair procedure to address specific, confirmed customer concerns of: ? Audio output interruption every 2-3 seconds when lis
    Bulletin Number: 16-97-15
    THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT
    Bulletin Number: 18-182-15
    THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC
    Bulletin Number: F10TSG
    TECHNICAL SUPPORT GUIDE - GEN 2.0 & 2.1 MICRO SD NAVIGATION (AVN) DISPLAY AUDIO (DA)
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.
    2016 SUBARU XV CROSSTREK HYBRID
    Bulletin Number: 01-168-09R
    The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
    Bulletin Number: 14-22-16R
    To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
    Bulletin Number: 15-177-14R
    This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.
    Bulletin Number: 16-104-17R
    This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a "bump" feeling from the CVT. The bump feeling has been reported to occur after the C
    Bulletin Number: 16-108-17
    In conjunction with current TSB 16-94-15R, this bulletin provides a new service procedure for repairing the drive motor case assembly. Previously, failure of the non-serviceable o-rings on the electric oil pump relief valve located inside
    Bulletin Number: Subaru Tech Tips
    Subaru Service and Technical Support Line Newletter.

     

    Recalls for 2016 Subaru

    2016 SUBARU CROSSTREK
    NHTSA Campaign ID:EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:05/17/2012 - 06/13/2017
    Potential Units Affected:1303530

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.

    Consequence:

    Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.

    Action:

    Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUE-90.
    2016 SUBARU FORESTER
    NHTSA Campaign ID:EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:12/18/2012 - 04/28/2016
    Potential Units Affected:1303530

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.

    Consequence:

    Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.

    Action:

    Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUE-90.
    2016 SUBARU FORESTER
    NHTSA Campaign ID:ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO-CHARGER
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:06/01/2015 - 10/20/2015
    Potential Units Affected:18187

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2015-2016 WRX vehicles manufactured April 10, 2015, to October 21, 2015, and Forester 2.0XT vehicles manufactured April 10, 2015, to October 20, 2015. The turbocharger air intake duct may crack and possibly result in an engine stall.

    Consequence:

    An engine stall increases the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will inspect the turbocharger air intake duct, and replace it as necessary, free of charge, depending on the lot number found on the duct. The recall began April 2016. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WTA-62.
    2016 SUBARU IMPREZA
    NHTSA Campaign ID:EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:04/26/2007 - 10/28/2016
    Potential Units Affected:1303530

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.

    Consequence:

    Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.

    Action:

    Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUE-90.
    2016 SUBARU IMPREZA
    NHTSA Campaign ID:EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:04/26/2007 - 10/28/2016
    Potential Units Affected:1303530

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.

    Consequence:

    Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.

    Action:

    Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUE-90.
    2016 SUBARU LEGACY
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:10/24/2015 - 11/16/2015
    Potential Units Affected:3251

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.

    Consequence:

    If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.

    Action:

    Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
    2016 SUBARU LEGACY
    NHTSA Campaign ID:POWER TRAIN:AUTOMATIC TRANSMISSION
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:07/03/2015 - 07/25/2015
    Potential Units Affected:2893

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.

    Consequence:

    If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.

    Action:

    Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
    2016 SUBARU LEGACY
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DRIVESHAFT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:07/03/2015 - 07/25/2015
    Potential Units Affected:2893

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.

    Consequence:

    If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.

    Action:

    Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
    2016 SUBARU LEGACY
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DRIVESHAFT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:10/24/2015 - 11/16/2015
    Potential Units Affected:3251

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.

    Consequence:

    If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.

    Action:

    Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
    2016 SUBARU LEGACY
    NHTSA Campaign ID:STEERING:COLUMN
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:02/29/2016 - 05/06/2016
    Potential Units Affected:48819

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016-2017 Legacy and Outback vehicles manufactured February 29, 2016, to May 6, 2016. The steering column on the affected vehicles may have been improperly machined, and as a result, turning the steering wheel may have no effect on the direction of the wheels.

    Consequence:

    The loss of steering ability would increase the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will inspect the lot number on the steering column, replacing the steering column, as necessary, free of charge. The recall began May 13, 2016. Owners may contact Subaru customer service at 1-800-782-2783 or by visiting http://www.wtd65.service-campaign.com. Subaru's number for this recall is WTD-65. Note: Until the vehicles have been inspected, owners are advised not to drive their vehicles.
    2016 SUBARU OUTBACK
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DRIVESHAFT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:10/24/2015 - 11/17/2015
    Potential Units Affected:3251

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.

    Consequence:

    If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.

    Action:

    Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
    2016 SUBARU OUTBACK
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:10/24/2015 - 11/17/2015
    Potential Units Affected:3251

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.

    Consequence:

    If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.

    Action:

    Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
    2016 SUBARU OUTBACK
    NHTSA Campaign ID:POWER TRAIN:AUTOMATIC TRANSMISSION
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:07/03/2015 - 07/27/2015
    Potential Units Affected:2893

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.

    Consequence:

    If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.

    Action:

    Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
    2016 SUBARU OUTBACK
    NHTSA Campaign ID:POWER TRAIN:DRIVELINE:DRIVESHAFT
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:07/03/2015 - 07/27/2015
    Potential Units Affected:2893

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.

    Consequence:

    If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.

    Action:

    Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
    2016 SUBARU OUTBACK
    NHTSA Campaign ID:STEERING:COLUMN
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:02/29/2016 - 05/06/2016
    Potential Units Affected:48819

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2016-2017 Legacy and Outback vehicles manufactured February 29, 2016, to May 6, 2016. The steering column on the affected vehicles may have been improperly machined, and as a result, turning the steering wheel may have no effect on the direction of the wheels.

    Consequence:

    The loss of steering ability would increase the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will inspect the lot number on the steering column, replacing the steering column, as necessary, free of charge. The recall began May 13, 2016. Owners may contact Subaru customer service at 1-800-782-2783 or by visiting http://www.wtd65.service-campaign.com. Subaru's number for this recall is WTD-65. Note: Until the vehicles have been inspected, owners are advised not to drive their vehicles.
    2016 SUBARU WRX
    NHTSA Campaign ID:ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO-CHARGER
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:04/13/2015 - 10/21/2015
    Potential Units Affected:18187

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2015-2016 WRX vehicles manufactured April 10, 2015, to October 21, 2015, and Forester 2.0XT vehicles manufactured April 10, 2015, to October 20, 2015. The turbocharger air intake duct may crack and possibly result in an engine stall.

    Consequence:

    An engine stall increases the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will inspect the turbocharger air intake duct, and replace it as necessary, free of charge, depending on the lot number found on the duct. The recall began April 2016. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WTA-62.
    2016 SUBARU WRX
    NHTSA Campaign ID:FORWARD COLLISION AVOIDANCE: CRASH IMMINENT BRAKING
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:03/23/2015 - 03/23/2015
    Potential Units Affected:71710

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.

    Consequence:

    If the automatic pre-collision braking system does not function as intended, the vehicle will not react to an obstacle in its path, increasing the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.
    2016 SUBARU WRX
    NHTSA Campaign ID:EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
    Manufacturer:Subaru of America, Inc.
    Manufacture Dates:03/23/2015 - 03/23/2015
    Potential Units Affected:71710

    Defect Description:

    Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.

    Consequence:

    If the automatic pre-collision braking system does not function as intended, the vehicle will not react to an obstacle in its path, increasing the risk of a crash.

    Action:

    Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.

*Green Vehicles

Find the Subaru models that are the cleanest and most fuel efficient.
  • The Green Vehicle Guide will help you find the most fuel-efficient Subaru for your needs.

    California emissions requirements differ from the federal requirements, and therefore selecting ALL STATES may produce multiple listings for the same vehicle.

     

     

     

     

*Monthly Payment Calculator

Find a car or truck made by Subaru that fits your budget by using our monthly payment calculator.
  • Make your selections in the boxes below and click the "Generate List" button to see a list of Subaru cars and trucks that fit your monthly budget.