Mazda Buyers Guide

 

Click a car name to see the crash test details for that model.

 

 

 

Crash Test Data for 2006 Mazda

Mazda Vehicle Front Star Rating Side Star Rating Rollover Resistance Rating
Driver Passenger Front Seat Rear Seat
2006 B-SeriesNot
Tested
2006 B-SeriesNot
Tested
2006 Mazda3
2006 Mazda5Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2006 Mazda6
2006 Mazda6
2006 Mazda6
2006 MPVNot
Tested
2006 MX-5/ MiataNot
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2006 RX-8
2006 Tribute

 

Service Bulletins for 2006 Mazda

2006 MAZDA B-SERIES TRUCK
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 0101307
NO START/LOSS OF ENGINE TIMINGS/SCRAPING NOISE AT CRANKSHAFT PULLEY/POSSIBLE ENGINE DAMAGE. *KB
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 0400504
GRABBING CONDITION FROM REAR DRUM BRAKES. *TT UPDATED 4/25/08. *NJ
Bulletin Number: 0500106
NEUTRAL TOW CAPABILITY - SERVICE KIT REQUIREMENTS - SERVICE TIP. *TT
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 0900206
LIMITED OR RESTRICTED INWARD MOVEMENT OF EXTERIOR REAR VIEW MIRROR GLASS. *TT
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 0901703
ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA-068-17
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
2006 MAZDA MAZDA3
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-004-16-3237
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNER┬┐S MANUAL.
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 0100206
ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT
Bulletin Number: 01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-006-11
MAZDA: A MALFUNCTION LIGHT IS ON WITH A STORED TROUBLE CODE. *RM
Bulletin Number: 0100706
NO START DUE TO FROZEN MAIN RELAY. *TT
Bulletin Number: 0100807
ENGINE STALL AND HESITATION AFTER START-UP UNDER HIGH AMBIENT TEMPERATURE. *KB
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01012006
RE-DESIGNED CYLINDER HEAD. *TT
Bulletin Number: 01012006
KEY REMINDER CHIMES CONTINUOUSLY / KEYLESS ENTRY INOPERATIVE. *TT
Bulletin Number: 01-016-16-3220
THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0102105
ENGINE VIBRATION/ KNOCKING NOISE/ NO. 3 ENGINE MOUNT RUBBER BROKEN. *SC UPDATED ON 09/25/07. *NJ
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 01-024/08
MIL COMES ON WITH DTC P2006 / VARIABLE TUMBLE SHUTTER VALVE CAN NOT COMPLETELY CLOSE. *NJ
Bulletin Number: 0103106
ENGINE HAS ROUGH IDLE AFTER COLD START. *TT
Bulletin Number: 0104406
MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER
Bulletin Number: 02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 0200406
TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-14-2976
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 0300106
BODY VIBRATION AT CRUISE SPEED. *TT
Bulletin Number: 03012006
INTERMITTENT HARD TO STEER. *AK
Bulletin Number: 04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 06-003/08
HEAVY STEERING EFFORT/POWER STEERING FLUID LEAKAGE. SOME MAZDA3 VEHICLES (EXCEPT MAZDASPEED3) WITH VIN'S LOWER THAN JM1BK**** **709745 (PRODUCED BEFORE FEB. 1, 2007) & SOME MAZDA5 VEHICLES WITH VIN'S LOWER THAN JM1CR**** **150635 (PRODUCE
Bulletin Number: 07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
Bulletin Number: 07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-002/08
SQUEAK AND RATTLE FROM SEAT BELT BUCKLE. VEHICLES WITH VIN'S LOWER THAN JM1 BK**** **823850 (PRODUCED BEFORE SEPT. 11, 2007). *NJ
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
Bulletin Number: 09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-018-13-2803
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 09018173351
Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-023-14-2924
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 0902505
PASSENGER JUNCTION BOX (PJB) DIAGNOSTIC TIPS. *TT
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Bulletin Number: 0903004
FRONT WIPERS DO NOT WIPE WELL. *TT
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 09-039-13-2852
SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH
Bulletin Number: 09-043-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 09-043-12-2676A
SOME CUSTOMER┬┐S MAY COMPLAIN ABOUT A RATTLE NOISE IN THE DRIVER┬┐S SEAT (A) WHEN STOPPING OR STARTING THE VEHICLE. THIS RATTLE NOISE IS CAUSED BY A GAP BETWEEN THE SEAT FRAME AND THE LINK BRACKET. TO CORRECT THE PROBLEM, A BRACKET AND SEAT S
Bulletin Number: 09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: MT-013-17
On some vehicles, the rear combination lamp lens becomes hazy and looks white when the brake or taillight is on. Due to heat accumulated by extended brake light (E) usage, the red inner cap (A) is melted (B) and the inner (C) and/or outer (
Bulletin Number: RF-11-12R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
Bulletin Number: SB-01-007-09
MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
Bulletin Number: SB-01-012-09
MAZDA: MIL COMES ON WITH P2004/CHECK VALVE STUCK OPEN. SOME VEHICLES MAY EXPERIENCE AN MIL THAT COMES ON WITH DTC P2004 (VARIABLE TUMBLE SHUTTER VALVE STUCK OPEN). THE CAUSE MAY BE THE CHECK VALVE IN THE INTAKE MANIFOLD VACUUM CHAMBER BEING
Bulletin Number: SB-01-023-10
MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE
Bulletin Number: SB-01-028-10
MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
Bulletin Number: SB-06-003-10
MAZDA: STEERING COLUMN SLIGHTLY MOVES IN OR OUT TELESCOPICALLY. SOME VEHICLES MAY EXHIBIT A SLIGHT IN OR OUT MOVEMENT OF THE STEERING WHEEL WHEN IT IS PUSHED OR PULLED, EVEN WITH THE STEERING WHEEL RELEASE LEVER PROPERLY LOCKED. *PE
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Bulletin Number: SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
2006 MAZDA MAZDA5
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-004-16-3237
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNER┬┐S MANUAL.
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 0100206
ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT
Bulletin Number: 01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-003-08
MAZDA: ENGINE STALLS WHEN DRIVING AT LOW SPEED. *PE
Bulletin Number: 01-003/08
MULTI-MODEL - ENGINE STALLS WHEN DRIVING AT LOW SPEED. *NJ
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-006-11
MAZDA: A MALFUNCTION LIGHT IS ON WITH A STORED TROUBLE CODE. *RM
Bulletin Number: 01-008/08
ENGINE STUMBLE WHILE DRIVING WITH LIGHT ACCELERATION AT 1500-2500 RPM. *NJ
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01012006
KEY REMINDER CHIMES CONTINUOUSLY / KEYLESS ENTRY INOPERATIVE. *TT
Bulletin Number: 01-016-16-3220
THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0102105
ENGINE VIBRATION/ KNOCKING NOISE/ NO. 3 ENGINE MOUNT RUBBER BROKEN. *SC UPDATED ON 09/25/07. *NJ
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 0102207
ENGINE STALLS WHEN DRIVING AT LOW SPEEDS. *KB
Bulletin Number: 01-024/08
MIL COMES ON WITH DTC P2006 / VARIABLE TUMBLE SHUTTER VALVE CAN NOT COMPLETELY CLOSE. *NJ
Bulletin Number: 0104406
MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER
Bulletin Number: 02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 0200406
TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 0300106
BODY VIBRATION AT CRUISE SPEED. *TT
Bulletin Number: 03012006
INTERMITTENT HARD TO STEER. *AK
Bulletin Number: 04-001-19-3556
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-002-14-2879
SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. THIS IS A NORMAL OPERATING NOISE OF TH
Bulletin Number: 04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-003-18-3455
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 06-003/08
HEAVY STEERING EFFORT/POWER STEERING FLUID LEAKAGE. SOME MAZDA3 VEHICLES (EXCEPT MAZDASPEED3) WITH VIN'S LOWER THAN JM1BK**** **709745 (PRODUCED BEFORE FEB. 1, 2007) & SOME MAZDA5 VEHICLES WITH VIN'S LOWER THAN JM1CR**** **150635 (PRODUCE
Bulletin Number: 07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
Bulletin Number: 07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
Bulletin Number: 0800108
SEAT BELT RETAINER BREAKS. *NJ
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-002-11
MAZDA: SALTWATER ENTERING THE CRASH SENSOR CONNECTOR IS CAUSING THE AIR BAG WARNING LIGHT TO COME ON. 2006-2010 MAZDA5. *RM
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
Bulletin Number: 09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 0900406
FRONT BUMPER REINFORCEMENT RIB - SERVICE TIP. *TT
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-11
MAZDA: THERE IS POSSIBLE EXCESSIVE CONDENSATION OR WATER INSIDE THE HEADLAMP UNIT ON MANY MAZDA MODELS. *RM
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 0902105
TAILLIGHT LENS WATER DROPLETS/AIR BUBBLES CONCERN. *TS
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 0902707
REAR SLIDE DOOR LATCH SCREW IS CORRODED. *KB
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 09-039-13-2852
SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH
Bulletin Number: 09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
Bulletin Number: SB-01-007-09
MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
Bulletin Number: SB-01-012-09
MAZDA: MIL COMES ON WITH P2004/CHECK VALVE STUCK OPEN. SOME VEHICLES MAY EXPERIENCE AN MIL THAT COMES ON WITH DTC P2004 (VARIABLE TUMBLE SHUTTER VALVE STUCK OPEN). THE CAUSE MAY BE THE CHECK VALVE IN THE INTAKE MANIFOLD VACUUM CHAMBER BEING
Bulletin Number: SB-01-028-10
MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
Bulletin Number: SB-06-003-10
MAZDA: STEERING COLUMN SLIGHTLY MOVES IN OR OUT TELESCOPICALLY. SOME VEHICLES MAY EXHIBIT A SLIGHT IN OR OUT MOVEMENT OF THE STEERING WHEEL WHEN IT IS PUSHED OR PULLED, EVEN WITH THE STEERING WHEEL RELEASE LEVER PROPERLY LOCKED. *PE
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-08-004-11
MAZDA: 2006-2010 MAZDA 5. AIR BAG WARNING LIGHT IS ON WITH A STORED TROUBLE CODE. *RM
Bulletin Number: SB-09-003-13
MAZDA: ON VARIOUS MODEL YEARS AND MODEL VEHICLES, THE HEADLAMP ASSEMBLY WOULD HAVE EXCESSIVE CONDENSATION OR WATER WITHIN AND SHOULD BE CHECKED AND REPLACED, IF NECESSARY FOR CORRECT INSTALLATION. *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Bulletin Number: SB-09-054-09
MAZDA: ON SOME VEHICLES, THE SLIDING DOOR LOCK MAY BE HARD TO OPERATE. THIS MAY BE CAUSED BY TWO THINGS. FIRST, TOO MUCH GREASE HAS BEEN APPLIED TO THE LOCK ACTUATOR (A) AND SECOND, THE LOCK LEVER OF THE REMOTE CONTROLLER (B) GETS CAUGHT
Bulletin Number: SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
2006 MAZDA MAZDA6
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-004-16-3237
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNER┬┐S MANUAL.
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 0100206
ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT
Bulletin Number: 01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-003-08
MAZDA: ENGINE STALLS WHEN DRIVING AT LOW SPEED. *PE
Bulletin Number: 01-003/08
MULTI-MODEL - ENGINE STALLS WHEN DRIVING AT LOW SPEED. *NJ
Bulletin Number: 0100406
MAZDA SPECIAL PROGRAM (MSP11) - O2 SENSOR DIAGNOSTIC TROUBLE CODE ERROR. *TT
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 0100907
ENGINE NO START DUE TO FROZEN MAIN RELAY/FUEL PUMP RELAY. *KB
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01012006
RE-DESIGNED CYLINDER HEAD. *TT
Bulletin Number: 01012006
RECIRC AIR FUNCTION INOPERATIVE. *TT
Bulletin Number: 01-016-16-3220
THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0101707
ENGINE STALLS AT LOW SPEEDS. *KB
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 0102207
ENGINE STALLS WHEN DRIVING AT LOW SPEEDS. *KB
Bulletin Number: 01-025/08
MIL ILLUMINATION ON WITH DTC P2112. VEHICLES PRODUCED BEFORE FEB. 4, 2008. *NJ
Bulletin Number: 0104406
MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER
Bulletin Number: 02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-14-2976
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 0200606
STEERING PULL/DRIFT-IMPROVED DIAGNOSTIC AND REPAIR PROCEDURES. *KB
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
Bulletin Number: 07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 08-003-17-3345
Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
Bulletin Number: 09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-007/08
HEADLIGHT LENS CONDENSATION OR WATER ENTRY - (NOT APPLICABLE TO MAZDASPEED6). *NJ
Bulletin Number: 09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09012007
MIL ILLUMINATION (DTC P2006) VOLUNTARY EMISSION RECALL CAMPAIGN 4807H AND OBD-II COMPLIANCE VOLUNTARY EMISSION RECALL CAMPAIGN 4907H. *NJ
Bulletin Number: 09-018-13-2803
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 09018173351
Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-023-14-2924
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 09-039-13-2852
SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH
Bulletin Number: 09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 11
MAZDA SPECIAL PROGRAM (MSP) - O2 SENSOR DTC ERROR. *TT
Bulletin Number: 17-04
A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E.
Bulletin Number: MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: REC-4907H
MAZDA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN EMISSION RECALL CAMPAIGNS ON CERTAIN VEHICLES TO ADDRESS A MALFUNCTION INDICATOR LAMP ILLUMINATION CONCERN AND A MALFUNCTION WITH THE ON BOARD DIAGNOSTIC ADAPTIVE FEED
Bulletin Number: RF-04-14R4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA-068-17
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
Bulletin Number: SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
Bulletin Number: SA327
TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82
Bulletin Number: SB-01-007-09
MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
Bulletin Number: SB-01-023-10
MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE
Bulletin Number: SB-01-028-10
MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
Bulletin Number: SB-01-033-08
MAZDA: ENGINE CRANK/NO START. SOME VEHICLES MAY EXPERIENCE ONE OR MORE OF THE ELECTRICAL CONCERNS DUE TO POOR CONTACT AT THE C-04 CONNECTOR. FUEL PUMP RELAY, A/C PRESSURE SWITCH, REAR WINDOW DEFROSTER RELAY TO CENTER PANEL.
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Bulletin Number: SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
2006 MAZDA MAZDASPEED6
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
Bulletin Number: 0101007
MIL COMES ON WITH DTC P2006 (VARIABLE SWIRL CONTROL SYSTEM SHUTTER VALVE STUCK CLOSED). *KB
Bulletin Number: 01-012-12
MAZDA: VARIABLE TIMING (VVT) NOISE AND/OR TIMING CHAIN NOISE. THE REPAIR PROCEDURE FLOWCHART, REPAIR PROCEDURE AND WARRANTY INFORMATION HAVE BEEN REVISED. ALSO INCLUDED MODEL MAZDASPEED3 MODEL YEAR 2010 *JS
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 01-022-08
ROUGH IDLE, LACK OF POWER, AND/OR MIL ON WITH DTC P2177/P2187 (FUEL SYSTEM LEAN). *NJ
Bulletin Number: 01-022/08
ROUGH IDLE, LACK OF POWER, AND/OR MIL ON WITH DTC P2177/P2187 (FUEL SYSTEM LEAN). *NJ
Bulletin Number: 0500307
CLUTCH PEDAL IS DIFFICULT TO OPERATE. *KB
Bulletin Number: 08-003-17-3345
Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M
Bulletin Number: 09012007
MIL ILLUMINATION (DTC P2006) VOLUNTARY EMISSION RECALL CAMPAIGN 4807H AND OBD-II COMPLIANCE VOLUNTARY EMISSION RECALL CAMPAIGN 4907H. *NJ
Bulletin Number: 09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 17-04
A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E.
Bulletin Number: REC-4907H
MAZDA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN EMISSION RECALL CAMPAIGNS ON CERTAIN VEHICLES TO ADDRESS A MALFUNCTION INDICATOR LAMP ILLUMINATION CONCERN AND A MALFUNCTION WITH THE ON BOARD DIAGNOSTIC ADAPTIVE FEED
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA-068-17
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
Bulletin Number: SA327
TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82
Bulletin Number: SB-01-007-09
MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
Bulletin Number: SB-01-018-11
MAZDA: THERE IS A RATTLE NOISE FROM THE ENGINE DUE TO A STRETCHED TIMING CHAIN. *RM UPDATED 4/18/2012. *KB
Bulletin Number: SB-01-021-11
MAZDA: FUEL PUMP OR PRESSURE LINE PIPE INSTALLATION/REMOVAL INFORMATION. *RM
Bulletin Number: SB-01-023-10
MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE
Bulletin Number: SB-01-028-10
MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
Bulletin Number: SSP-86
MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DUE TO INSUFFICIENT CRANK CASE VENTILATION, HEAVY WHITE SMOKE APPEARS FROM EXHAUST PIPES, AFTER LONG IDLE PERIODS, RESULTING IN OIL LEAKAGE PAST EXHAUST TURGINE SHAFT SEAL. *PE
Bulletin Number: SSP-87
MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DUE TO WEAR ON LOCK PIN HOLE IN VVT ROTOR OR BREAKAGE OF VVT CASE, LOUD TICKING NOISE (KNOCKING/RATTLE) IS HEARD, FROM TIMING COVER AND/OR VALVE (CYLINDER HEAD) COVER, WHEN ENGINE IS ST
2006 MAZDA MIATA
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 04-002-12
MAZDA: CLUNK/BANG NOISE DURING FIRST FORWARD MOVEMENT AFTER SITTING. THIS IS A NORMAL OPERATING NOISE OF THE ANTI-LOCK BRAKE SYSTEM (ABS). DO NOT ATTEMPT ANY REPAIRS. ALSO INCLUDED MODEL CX-5 YEAR 2013; MODEL CX-9 YEARS 2012-2013; MODEL MIA
Bulletin Number: SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
2006 MAZDA MPV
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-004-16-3237
RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNER┬┐S MANUAL.
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
Bulletin Number: 07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 0902605
POWER SLIDING DOOR (PSD) RE-OPENS AFTER STARTING TO CLOSE AND LATCH. *TT
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA-068-17
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
Bulletin Number: SA327
TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
2006 MAZDA MX-5
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 0100206
ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT
Bulletin Number: 01-002-18-3417
Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-016-16-3220
THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 01-036-08
MAZDA: VEHICLES MAY EXPERIENCE THE MIL ON WITH DTC P0507 SET. P0507 IDLE AIR CONTROL SYSTEM RPM HIGHER THAN EXPECTED. (TRANSMISSION) (MT - MIL ON - P0507 SET). *PE
Bulletin Number: 0104406
MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER
Bulletin Number: 02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 0200406
TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-14-2976
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 03-002-16-3179
SOME VEHICLES MAY EXHIBIT A WHINING NOISE FROM THE REAR DIFFERENTIAL WHEN DRIVING.THE CONCERN MAY BE CAUSED BY IMPROPER TOOTH CONTACT PATTERN OF THE REAR DIFFERENTIAL GEAR FROM ABNORMAL WEAR. THIS ABNORMAL WEAR IS CAUSED BY GEAR TOOTH LAPPI
Bulletin Number: 03-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 03-004-14-2959
SOME VEHICLES MAY EXHIBIT A WHINING NOISE FROM THE REAR DIFFERENTIAL WHEN DRIVING.THE CONCERN MAY BE CAUSED BY IMPROPER TOOTH CONTACT PATTERN OF THE REAR DIFFERENTIAL GEAR FROM ABNORMAL WEAR. THIS ABNORMAL WEAR IS CAUSED BY GEAR TOOTH LAPPI
Bulletin Number: 04-001-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 04-001-13-2757
THE FRONT DISC PLATE FIXING SCREWS (A) HAVE BEEN DISCONTINUED. WITH THIS CHANGE, THE DISC PLATE (B) AND WHEEL HUB (C) HAVE BEEN MODIFIED WITHOUT FIXING HOLES, ELIMINATING THE NEED FOR THE FIXING SCREWS (A).
Bulletin Number: 04-001-19-3556
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-002-14-2879
SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. THIS IS A NORMAL OPERATING NOISE OF TH
Bulletin Number: 04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-003-18-3455
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 0500206
SQUEAKING NOISE FROM CLUTCH PEDAL WHEN DEPRESSED. *TT
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 0501007
MANUAL TRANSMISSION - CLUTCH HARD TO DISENGAGE 2006-2007 MX-5 VEHICLES WITH VINS LOWER THAN JM1 NC**** ** 136430 (PRODUCED BEFORE MARCH 1, 2007) *NJ
Bulletin Number: 07-002-13-2842
A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS
Bulletin Number: 07-002-18-3432
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
Bulletin Number: 09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-11
MAZDA: THERE IS POSSIBLE EXCESSIVE CONDENSATION OR WATER INSIDE THE HEADLAMP UNIT ON MANY MAZDA MODELS. *RM
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SB-01-007-09
MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW
Bulletin Number: SB-01-023-10
MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE
Bulletin Number: SB-01-028-10
MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM
Bulletin Number: SB-01-041-09
MAZDA: IT IS POSSIBLE THAT A MALFUNCTION INDICATOR LIGHT MAY ILLUMINATE WITH DTC P0455 (EVAP SYSTEM LEAK DETECTED LARGE LEAK) STORED IN MEMORY, DUE TO POOR SEALING BETWEEN THE FUEL FILLER PIPE AND FUEL FILLER CAP. *PE
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-09-003-13
MAZDA: ON VARIOUS MODEL YEARS AND MODEL VEHICLES, THE HEADLAMP ASSEMBLY WOULD HAVE EXCESSIVE CONDENSATION OR WATER WITHIN AND SHOULD BE CHECKED AND REPLACED, IF NECESSARY FOR CORRECT INSTALLATION. *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Bulletin Number: SB-09-021-09
MAZDA: WATER ACCUMULATION IN FOOTWELL/PLUGGED SOFT TOP DRAINS. SOME VEHICLES EQUIPPED WITH THE FOLDING SOFT TOP MAY EXPERIENCE WATER ACCUMULATION IN THE FOOT WELLS DUE TO THE SOFT TOP DRAINS BECOMING CLOGGED WITH LEAVES AND OTHER DEBRIS.
Bulletin Number: SB-09-046-10
MAZDA: SOME VEHICLES WITH SOFT TOPS MAY EXPERIENCE WATER ACCUMULATION IN THE FOOTWELLS, BECAUSE THE DRAINS ARE CLOGGED WITH DEBRIS. *RM
Bulletin Number: SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
2006 MAZDA RX-8
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 0100107
MIL ILLUMINATION WITH DTC P0455. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-013/08
MAZDA SPECIAL PROGRAM (MSP16) - ENGINE LACK OF POWER -PCM REFLASH. VEHICLES PRODUCED FROM APRIL 10, 2003 THROUGH NOV. 9, 2007. VIN RANGE JM1FE17**40100053 - 80215462. *NJ UPDATED 6/3/08. *NJ
Bulletin Number: 01-014/08
ENGINE LACK OF POWER. *NJ
Bulletin Number: 0101507
MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED - P0126 SET - THERMOSTAT MONITOR. *KB
Bulletin Number: 01-015/08
ENGINE CRANKS NO START. *NJ
Bulletin Number: 0101607
IGNITION COIL INSPECTION. *KB
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-019/08
SOME VEHICLES MAY EXPERIENCE A MIL WITH DTC P2070 (SSV STUCK OPEN). *NJ
Bulletin Number: 0103906
MAZDA MODULAR DIAGNOSTIC SYSTEM (M-MDS) STEERING WHEEL ANGLE SENSOR MODULE SELF TEST SHOWS FAIL. *KB
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-002-16-3124
SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER
Bulletin Number: 02-002-19-3546
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 0200406
TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-14-2976
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 02-005-08
MAZDA: NOISE FROM FRONT OF VEHICLE/STABILIZER CONTROL LINK BROKEN. THE PLASTIC INSERT CONNECTING THE STABILIZER CONTROL LINK BALL JOINT TO THE CONTROL LINK MAY CRACK AND BECOME SEPARATED. *PE UPDATED 3/19/09. *PE
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-008-18-3467
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-13-2854
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 04-001-19-3556
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-002-12
MAZDA: CLUNK/BANG NOISE DURING FIRST FORWARD MOVEMENT AFTER SITTING. THIS IS A NORMAL OPERATING NOISE OF THE ANTI-LOCK BRAKE SYSTEM (ABS). DO NOT ATTEMPT ANY REPAIRS. ALSO INCLUDED MODEL CX-5 YEAR 2013; MODEL CX-9 YEARS 2012-2013; MODEL MIA
Bulletin Number: 04-002-14-2879
SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. THIS IS A NORMAL OPERATING NOISE OF TH
Bulletin Number: 04-002-19-3545
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-003-18-3455
Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
Bulletin Number: 04-004-13-2853
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 04-004-14-2926
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-16-3160
SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR,
Bulletin Number: 04-004-18-3468
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 0500406
MANUAL TRANSMISSION-CLUTCH HARD TO DISENGAGE. *KB
Bulletin Number: 0501006
SLIGHT SURGE WHILE DRIVING AT 40-55 MPH. *KB
Bulletin Number: 08-001-13-2859
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service.
Bulletin Number: 08-001-18-3457
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 08-001-19-3544
This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 08-003-17-3345
Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-003-16-3130
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA
Bulletin Number: 09-003-19-3555
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-003-19-3555a
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-007-14-2878
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 0900807
HEADLIGHT AUTO-LEVELING MALFUNCTION INDICATOR LIGHT ILLUMINATES. *KB
Bulletin Number: 09-008-17-3324
Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-011-18-3448
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl
Bulletin Number: 0901307
TRUNK REQUEST SWITCH INOPERATIVE. *KB
Bulletin Number: 09-018-13-2803
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 09018173351
Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-023-14-2924
SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-028-12-2701B
THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES.
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 09-039-13-2852
SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH
Bulletin Number: 09-046-12-2744
SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM
Bulletin Number: 1066M
SOME CUSTOMERS MAY COMPLAIN ABOUT IMPROPER OPERATION OF THE AUTO-DIMMING MIRROR. THIS MAY BE CAUSED BY AN OBSTRUCTION OF THE FRONT AND/OR REAR LIGHT SENSOR(S) (E.G. HANGING A PARKING PERMIT FROM THE MIRROR). USE A SOFT CLOTH WITH MILD DETER
Bulletin Number: MT-003-18
The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: MTI_1031
SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE.
Bulletin Number: MTI_1031
SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE
Bulletin Number: MTI_1032
SOME CUSTOMERS MAY COMPLAIN ABOUT A RATTLE TYPE NOISE COMING FROM THE REAR OF THE VEHICLE WHEN DRIVING ON ROUGH ROADS. THIS MAY BE CAUSED BY A LOOSE SPARE TIRE JACK.
Bulletin Number: MTI_1034
THIS ARTICLE PROVIDES HVAC HEATER/DEFROSTER OPERATING TIPS USING MODE SELECTOR DIAL. THIS INCLUDES THE USE OF INTERMEDIATE POSITIONS.
Bulletin Number: RF-14-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SA-068-17
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
Bulletin Number: SA234
IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB.
Bulletin Number: SA327
TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82
Bulletin Number: SB-01-016-10
MAZDA: HESITATION/IDLE VIBRATION DUE TO CRACKED ENGINE MOUNT. ON SOME VEHICLES WITH MANUAL TRANSMISSION MAY EXPERIENCE DECELERATION IN 3RD GEAR WITH ENGINE SPEED LESS THAN 3000 RPM AT APPROX. 30 MPH (50KM/H), THEN QUICKLY DEPRESSING THE A
Bulletin Number: SB-01-041-09
MAZDA: IT IS POSSIBLE THAT A MALFUNCTION INDICATOR LIGHT MAY ILLUMINATE WITH DTC P0455 (EVAP SYSTEM LEAK DETECTED LARGE LEAK) STORED IN MEMORY, DUE TO POOR SEALING BETWEEN THE FUEL FILLER PIPE AND FUEL FILLER CAP. *PE
Bulletin Number: SB-08-001-13
MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE
Bulletin Number: SB-09-057-10
MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM
2006 MAZDA TRIBUTE
Bulletin Number: 00-001-13-2748
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-13-2748A
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 00-001-18-3446
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
Bulletin Number: 00-001-18-3446a
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-001-19-3560
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
Bulletin Number: 00-002-14-2936
MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE
Bulletin Number: 00-002-19-3561
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-18-3480
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro
Bulletin Number: 00-003-18-3480a
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap
Bulletin Number: 00-003-19-3583
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Bulletin Number: 00-004/12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 00-004-12-2741
MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNER┬┐S MANU
Bulletin Number: 0004872
HESITATION/STUMBLE. *TT
Bulletin Number: 00307
AVAILABILITY OF NON-REQUIRED TOOLS. *KB
Bulletin Number: 01-001-19-3551
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-002-19-3552
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 01-004-19-3558
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 01-008-18-3451
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
Bulletin Number: 01-009-18-3452
The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test
Bulletin Number: 0101307
NO START/LOSS OF ENGINE TIMINGS/SCRAPING NOISE AT CRANKSHAFT PULLEY/POSSIBLE ENGINE DAMAGE. *KB
Bulletin Number: 0101604
DIAGNOSTIC TIPS FOR TROUBLESHOOTING COIL-ON-PLUG MISFIRE CONCERNS. *TT THIS BULLETIN SUPERSEDES LAST ISSUED 5/3/04. *TT
Bulletin Number: 01-016-18-3522
On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
Bulletin Number: 0102206
FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ
Bulletin Number: 0102605
SLOW FUEL FILL OR FREQUENT FILLING STATION PUMP SHUT-OFF. *TT
Bulletin Number: 0103407
SOME VEHICLES MAY EXHIBIT A SLOW FUEL FILL CONCERN DURING WINTER/FREEZING CONDITIONS, OR A MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODE (DTC) P0451 PRESENT. MAY BE CAUSED BY WATER/MOISTURE ENTERING THE FUEL FILLER VENT
Bulletin Number: 02-001-13-2752
SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH
Bulletin Number: 02-001-19-3550
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 0200306
TIRE PRESSURE MONITORING SYSTEM (TPMS) INDICATOR LIGHT ON - TIRE PRESSURE SENSOR TRAINING PROCEDURE. *TT
Bulletin Number: 02-004-13-2770
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770A
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-13-2770B
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-004-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin Number: 02-004-19-3574
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 02-006-18-3449
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
Bulletin Number: 02-009-16-3155
SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Bulletin Number: 02-010-18-3477
Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road.
Bulletin Number: 05-001-16-3128
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-001-18-3453
Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC
Bulletin Number: 05-002-13-2777
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 05-002-13-2777A
ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:¿ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO
Bulletin Number: 0500407
ENGINE STALLS ON ENGAGEMENT/STOPPING. *KB
Bulletin Number: 0500706
MERCON ATF IS BEING REPLACED BY MERCON V AS A SERVICE FLUID. *KB
Bulletin Number: 07
COMBINATION METER SELF DIAGNOSIS. *TT
Bulletin Number: 0800306
NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB
Bulletin Number: 09-002-19-3554
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
Bulletin Number: 09-004-19-3543
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-005-13-2781
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH
Bulletin Number: 09-009-19-3566
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 0901703
ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT
Bulletin Number: 09-019-18-3450
This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
Bulletin Number: 09-025-18-3479
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne
Bulletin Number: 09-027-14-2935
THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVER┬┐S FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P
Bulletin Number: 09-029-18-3497
In the event that all vehicle keys are lost and the vehicle key code is not available on the Vehicle Retail Data Inquiry system, replacement keys may only be acquired by obtaining the key code using the Repair Procedure below. Mazda recomme
Bulletin Number: 09-030-15-3073
MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN
Bulletin Number: 09-034-14-2956
IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:┬┐MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.┬┐WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO
Bulletin Number: 09-034-18-3430
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-034-18-3430a
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co
Bulletin Number: 09-035-17-3080
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co
Bulletin Number: 0904006
SMART JUNCTION BOX (SJB) REPLACEMENT AND CLEARING CONTINUOUS DTCS FROM THE SJB. *KB
Bulletin Number: MT-012-18
If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or
Bulletin Number: SA-013-19
MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto
Bulletin Number: SA-061-17
In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En
Bulletin Number: SB-05-003-11
MAZDA: THE ENGINE IS STALLING WHEN STOPPING OR ENGAGING INTO DRIVE OR REVERSE. IT MAY BE INTERMITTENT AND USUALLY OCCURS ON LONG DRIVES. IT MAY BE CAUSED BY INTERNAL WEAR OF THE TORQUE CONVERTER. *RM
Bulletin Number: SB-09-005-13
MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE

 

Recalls for 2006 Mazda

2006 MAZDA B-SERIES TRUCK
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:04/17/2003 - 05/02/2006
Potential Units Affected:17576

Defect Description:

Mazda North American Operations (Mazda) is recalling certain 2004-2006 Mazda B-series trucks. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.

Consequence:

In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger side frontal air bag inflator with an alternate inflator, free of charge. The recall began on January 17, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1817L. Note: This recall supersedes recall 15V-346. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed.
2006 MAZDA B-SERIES TRUCK
NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
Manufacturer:Mazda North American Operations
Manufacture Dates:04/17/2003 - 05/02/2006
Potential Units Affected:17576

Defect Description:

Mazda North American Operations (Mazda) is recalling certain 2004-2006 B-Series trucks. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to rupture.

Consequence:

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on January 17, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1917L. Note: This recall supersedes recall 16V-048. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed.
2006 MAZDA B-SERIES TRUCK
NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
Manufacturer:Mazda North American Operations
Manufacture Dates:08/05/2005 - 11/04/2005
Potential Units Affected:2205

Defect Description:

Mazda is recalling certain 2006 B-series vehicles. Mazda requests owners NOT TO DRIVE these vehicles until they have been remedied. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode. On January 11, 2018, Mazda North American Operations (Mazda) notified NHTSA that they are recalling 160 model year 2006 B-Series vehicles built with driver-side air bags. As of February 9, 2018, Mazda is expanding the recall to a total of 2,205 model year 2006 B-Series vehicles built with driver-side air bags. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode.

Consequence:

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could explode with sharp metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

Action:

Mazda will notify owners instructing them to not drive their vehicles, and dealers will replace the front driver side air bag inflator with an alternate inflator, free of charge. The recall began January 18, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 2218A.
2006 MAZDA B-SERIES TRUCK
NHTSA Campaign ID:VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
Manufacture Dates:08/29/2005 - 10/17/2005
Potential Units Affected:3982

Defect Description:

ON CERTAIN TRUCKS AND SPORT UTILITY VEHICLES, THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN PRODUCED WITHOUT GREASE APPLIED TO THE OUTPUT SHAFT GEAR.

Consequence:

AFTER A PERIOD OF CONTINUOUS USE ON THE HIGH SPEED SETTING, LACK OF GREASE ON THE OUTPUT SHAFT GEAR MAY CAUSE THE GEAR TEETH TO DISTORT OR FRACTURE DURING OPERATION RESULTING IN THE LOSS OF WIPER FUNCTION. INOPERATIVE WIPERS UNDER INCLEMENT WEATHER CONDITIONS COULD CAUSE A CRASH DUE TO IMPAIRED VISIBILITY.

Action:

DEALERS WILL INSPECT THE WIPER MOTOR FOR THE PRESENCE OF GREASE AND GREASE THE WIPER MOTOR GEARS IF NECESSARY. THE RECALL BEGAN ON NOVEMBER 28, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
2006 MAZDA B-SERIES TRUCK
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/05/2005 - 11/04/2005
Potential Units Affected:2205

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2006 B-Series vehicles. Mazda is requesting owners to NOT DRIVE these vehicles until they have been remedied. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to explode. On January 11, 2018, Mazda North American Operations (Mazda) notified NHTSA that they are recalling 160 model year 2006 B-Series vehicles built with driver-side air bags. As of February 9, 2018, Mazda is expanding the recall to a total of 2,205 model year 2006 B-Series vehicles built with driver-side air bags. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode.

Consequence:

In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with sharp metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

Action:

Mazda will notify owners instructing them to not drive their vehicles, and dealers will replace the front passenger side air bag inflator with an alternate inflator, free of charge. The recall began January 18, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 2318A.
2006 MAZDA MAZDA5
NHTSA Campaign ID:LATCHES/LOCKS/LINKAGES:DOORS:LATCH
Manufacturer:MAZDA MOTOR CORP
Manufacture Dates:04/12/2000 - 02/01/2006
Potential Units Affected:9800

Defect Description:

ON CERTAIN PASSENGER VEHICLES CURRENTLY REGISTERED IN THE FOLLOWING STATES: ALASKA, COLORADO, CONNECTICUT, DELAWARE, IDAHO, ILLINOIS, INDIANA, IOWA, KANSAS, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NEBRASKA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, NORTH DAKOTA, OHIO, PENNSYLVANIA, RHODE ISLAND, SOUTH DAKOTA, UTAH, VERMONT, WEST VIRGINIA, WISCONSIN,AND WYOMING. THE SIDE DOOR LATCH MECHANISMS MAY EXPERIENCE WATER INTRUSION ALLOWING THE LATCH MECHANISM TO FREEZE IN COLD WEATHER.

Consequence:

AS A RESULT, WHEN THE DOOR IS OPENED THE DOOR LATCH PAWL MAY REMAIN IN THE OPEN POSITION RESULTING IN THE DOOR NOT BEING ABLE TO BE CLOSED AND LATCHED. IF THE VEHICLE IS OPERATED WITH AN OPEN DOOR IT MAY ALLOW AN UNBELTED OCCUPANT TO BE EJECTED FROM THE VEHICLE WHICH COULD RESULT IN INJURY OR DEATH.

Action:

DEALERS WILL REPLACE THE SLIDING DOOR LATCHES WITH MODIFIED LATCHES. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
2006 MAZDA MAZDA5
NHTSA Campaign ID:ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
Manufacture Dates:04/12/2005 - 09/16/2005
Potential Units Affected:7000

Defect Description:

ON CERTAIN SPORT UTILITY VEHICLES, A HEAT BUILDUP IN THE EXHAUST SYSTEM CAN OCCUR.

Consequence:

THIS CONDITION COULD RESULT IN A FIRE.

Action:

MAZDA INSTRUCTED OWNERS (SEPTEMBER 16, 2005) TO BRING IN THEIR VEHICLES AND WILL BE GIVEN A RENTAL OR LOANER VEHICLE AT NO COST WHILE MAZDA REPAIRS THESE VEHICLES. THE RECALL BEGAN ON OCTOBER 26, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
2006 MAZDA MAZDA6
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:05/29/2002 - 05/05/2008
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MAZDA6
NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
Manufacturer:Mazda North American Operations
Manufacture Dates:05/29/2002 - 05/05/2008
Potential Units Affected:308992

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

Consequence:

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
2006 MAZDA MAZDA6
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:05/29/2002 - 05/05/2008
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MAZDA6
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:05/29/2002 - 05/05/2008
Potential Units Affected:269618

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Owners may contact Mazda customer service at 1-800-222-5500 ,Option 4. Mazda's number for this recall is 2618F. Note: This recall partially supersedes recall 16V354.
2006 MAZDA MAZDASPEED6
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:07/01/2005 - 06/29/2007
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MAZDASPEED6
NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
Manufacturer:Mazda North American Operations
Manufacture Dates:08/04/2005 - 06/29/2007
Potential Units Affected:308992

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

Consequence:

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
2006 MAZDA MAZDASPEED6
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:06/01/2005 - 06/29/2007
Potential Units Affected:269618

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Owners may contact Mazda customer service at 1-800-222-5500 ,Option 4. Mazda's number for this recall is 2618F. Note: This recall partially supersedes recall 16V354.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/02/2004 - 04/28/2006
Potential Units Affected:8018

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2009 RX-8 vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone B" above, Mazda is recalling certain 2005-2006 MPV and 2005-2008 RX-8 vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger side air bag inflator, free of charge. The recall began March 10, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0617A. Note: This recall is partially superseded by 18V404.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/02/2004 - 04/28/2006
Potential Units Affected:2539

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator explosion may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 2618F. Note: This recall partially supersedes recall 17V011.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/20/2003 - 04/28/2006
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/20/2003 - 04/28/2006
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/20/2003 - 04/28/2006
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA MPV
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:08/21/2002 - 04/28/2008
Potential Units Affected:269618

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Owners may contact Mazda customer service at 1-800-222-5500 ,Option 4. Mazda's number for this recall is 2618F. Note: This recall partially supersedes recall 16V354.
2006 MAZDA MX-5
NHTSA Campaign ID:AIR BAGS:FRONTAL
Manufacturer:MAZDA MOTOR CORP
Manufacture Dates:12/22/2005 - 02/15/2006
Potential Units Affected:2600

Defect Description:

ON CERTAIN PASSENGER VEHICLES, THE BOLT ATTACHING THE HORN ASSEMBLY TO THE STEERING WHEEL HUB MAY FAIL DURING A DRIVER SIDE FRONT AIR BAG DEPLOYMENT IN EXTREMELY LOW AMBIENT TEMPERATURE.

Consequence:

SHOULD THIS OCCUR, THE HORN ASSEMBLY MAY SEPARATE AND COULD INJURE THE DRIVER.

Action:

DEALERS WILL REPLACE THE DRIVER-SIDE FRONTAL AIR BAG MODULE FREE OF CHARGE. THE RECALL BEGAN ON APRIL 28, 2006. OWNERS MAY CONTACT MAZDA AT 800-222-5500.
2006 MAZDA RX-8
NHTSA Campaign ID:AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 02/18/2008
Potential Units Affected:308992

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

Consequence:

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
2006 MAZDA RX-8
NHTSA Campaign ID:FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 02/18/2008
Potential Units Affected:69447

Defect Description:

Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles. Heat from the engine and the exhaust may cause the main fuel pump pipe to crack.

Consequence:

If the fuel pump pipe cracks, fuel may leak, increasing the risk of a fire.

Action:

Mazda will notify owners, and dealers will replace the fuel pump filter kit, free of charge. The recall began on July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1017E.
2006 MAZDA RX-8
NHTSA Campaign ID:FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 02/08/2008
Potential Units Affected:69447

Defect Description:

Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles manufactured April 10, 2003, to February 18, 2008. The affected vehicles have fuel pump sealing rings that may deteriorate due to exposure to heat from the engine or exhaust pipe.

Consequence:

The deteriorated seals may leak fuel, which, in the presence of an ignition source, can increase the risk of a fire.

Action:

Mazda will notify owners, and dealers will replace the fuel pump sealing ring set and add a thermal insulation pad to the fuel tank, free of charge. The recall began July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0516J.
2006 MAZDA RX-8
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 05/16/2011
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA RX-8
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 05/16/2011
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA RX-8
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:04/10/2003 - 05/16/2011
Potential Units Affected:448320

Defect Description:

Mazda North American Operations (Mazda) is recalling certain model year 2004-2011 RX-8, 2004-2006 MPV, 2003-2008 Mazda6, and 2006-2007 Mazdaspeed6 vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2004-2008 RX-8, 2004-2006 MPV, 2003-2008 Mazda6 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain model year 2004 Mazda RX-8 and MPV, 2003-2004 Mazda6 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began July 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9416E. Note: This recall is partially superseded by recall 18V402.
2006 MAZDA RX-8
NHTSA Campaign ID:AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer:Mazda North American Operations
Manufacture Dates:07/01/2004 - 02/13/2008
Potential Units Affected:8018

Defect Description:

Mazda North America Operations (Mazda) is recalling certain 2009 RX-8 vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone B" above, Mazda is recalling certain 2005-2006 MPV and 2005-2008 RX-8 vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence:

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Action:

Mazda will notify owners, and dealers will replace the front passenger side air bag inflator, free of charge. The recall began March 10, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0617A. Note: This recall is partially superseded by 18V404.
2006 MAZDA TRIBUTE
NHTSA Campaign ID:VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
Manufacture Dates:08/29/2005 - 10/17/2005
Potential Units Affected:3982

Defect Description:

ON CERTAIN TRUCKS AND SPORT UTILITY VEHICLES, THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN PRODUCED WITHOUT GREASE APPLIED TO THE OUTPUT SHAFT GEAR.

Consequence:

AFTER A PERIOD OF CONTINUOUS USE ON THE HIGH SPEED SETTING, LACK OF GREASE ON THE OUTPUT SHAFT GEAR MAY CAUSE THE GEAR TEETH TO DISTORT OR FRACTURE DURING OPERATION RESULTING IN THE LOSS OF WIPER FUNCTION. INOPERATIVE WIPERS UNDER INCLEMENT WEATHER CONDITIONS COULD CAUSE A CRASH DUE TO IMPAIRED VISIBILITY.

Action:

DEALERS WILL INSPECT THE WIPER MOTOR FOR THE PRESENCE OF GREASE AND GREASE THE WIPER MOTOR GEARS IF NECESSARY. THE RECALL BEGAN ON NOVEMBER 28, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
2006 MAZDA TRIBUTE
NHTSA Campaign ID:ENGINE AND ENGINE COOLING
Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
Manufacture Dates: -
Potential Units Affected:217500

Defect Description:

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

Consequence:

A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.

Action:

Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6.
2006 MAZDA TRIBUTE
NHTSA Campaign ID:VEHICLE SPEED CONTROL:CABLES
Manufacturer:MAZDA NORTH AMERICAN OPERATIONS
Manufacture Dates: -
Potential Units Affected:217500

Defect Description:

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

Consequence:

A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.

Action:

Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6.