THE AUTO CHANNEL:   TACH Home | Auto News | Reviews | Media | Forums | Classifieds

USED CAR BUYER'S GUIDE


Fuel Economy | Crash Results | Recalls | Service Bulletins | Site Map

SUV    Sedan    Truck    Van    Convertible   Coupe    Wagon   Luxury    Hybrid      CUV
Compar-A-Graphs:    Rank-By-Specs    or  4-Car Comparison
  All Makes | Sport Utility | Subaru | Forester | 2014


2014 Subaru Forester 2.5i Limited

SAFETY FEATURES
 
  • Front Pretensioners
  • Driver Airbag
  • Seat Mounted Front Side Airbags
  • Driver Knee Airbag
  • Passenger Airbag Cutoff Sensor
  • Passenger Airbag
  • Front and Rear Side Head Curtain Airbags
  • Rear Electronic Parking Aid With Camera
  • Front Seatbelt Height Adjusters
  • Rear Center 3-Point Seatbelts
  • Side Guard Door Beams
 
Crash Test Results for the 2014 Subaru Models:
No crash test results exist
 
Service Bulletins for 2014 Subaru Forester 2.5i Limited
2014 SUBARU FORESTER:

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 02-131-12R
THIS BULLETIN WAS REVISED TO ADVISE RETAILERS THE WARRANTY/CLAIM INFORMATION HAS BEEN UPDATED.

Bulletin Number: 02-131-12R
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE PROCEDURES FOR THE DIAGNOSIS AND REPAIR OF OIL SEEPAGE WHICH MAY BE COMING FROM THE TIMING CHAIN COVER, FRONT CAMSHAFT CAP, CAMSHAFT CARRIER AND / OR UPPER OIL PAN.

Bulletin Number: 02-131-12R
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE PROCEDURES FOR THE DIAGNOSIS AND REPAIR OF OIL SEEPAGE WHICH MAY BE COMING FROM THE TIMING CHAIN COVER, FRONT CAMSHAFT CAP, CAMSHAFT CARRIER AND / OR UPPER OIL PAN.

Bulletin Number: 02-131-12R
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE PROCEDURES FOR THE DIAGNOSIS AND REPAIR OF OIL SEEPAGE WHICH MAY BE COMING FROM THE TIMING CHAIN COVER, FRONT CAMSHAFT CAP, CAMSHAFT CARRIER AND / OR UPPER OIL PAN.

Bulletin Number: 02-132-12R
DIAGNOSIS AND REPAIR FOR AVCS-RELATED DTCS P000A, P000B, P000C, P000D, P0011, P0014, P0021 AND P0024

Bulletin Number: 02-132-12R
DIAGNOSIS AND REPAIR FOR AVCS-RELATED DTCS P000A, P000B, P000C, P000D, P0011, P0014, P0021 AND P0024

Bulletin Number: 02-134-12R
The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.

Bulletin Number: 02-134-12R
The purpose of this bulletin is to announce a change to the specification of the valve springs used in the FB engine. The new springs have different color paint marks to help identify their application.

Bulletin Number: 02-139-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-144-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-144-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-144-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-144-13R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS - THE CHANGE WAS MADE AS A RESULT OF SOME LIMITED FINDINGS OF UNANTICIPATED WEAR OF THESE RINGS.

Bulletin Number: 02-144-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-144-13R
"THIS BULLETIN PROVIDES INFORMATION REGARDING A CHANGE MADE TO THE SURFACE TREATMENT APPLIED TO THE OIL CONTROL PISTON RINGS FOR 2.5L FB ENGINES. THE CHANGE WAS MADE AS A RESULT OF SOME LIMITED FINDINGS OF UNANTICIPATED WEAR OF THESE RINGS.

Bulletin Number: 02-144-13R
THIS BULLETIN PROVIDES INFORMATION REGARDING A CHANGE MADE TO THE SURFACE TREATMENT APPLIED TO THE OIL CONTROL PISTON RINGS FOR 2.5L FB ENGINES. THE CHANGE WAS MADE AS A RESULT OF SOME LIMITED FINDINGS OF UNANTICIPATED WEAR OF THESE RINGS.

Bulletin Number: 02-144-13R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-144-13R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS - THE CHANGE WAS MADE AS A RESULT OF SOME LIMITED FINDINGS OF UNANTICIPATED WEAR OF THESE RINGS.

Bulletin Number: 02-147-13
"THIS BULLETIN ANNOUNCES THE AVAILABILITY OF REVISED VALVE TRAIN COMPONENTS DEVELOPED TO REDUCE A TAPPING TYPE SOUND WHICH MAY BE HEARD COMING FROM THE LEFT-HAND (B2) SIDE OF THE ENGINE WHEN THE ENGINE IS WARM. THIS BULLETIN DOES NOT ADDRES

Bulletin Number: 02-147-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-152-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-152-14
REVISED VALVE TRAIN PARTS TO REDUCE A WARM ENGINE TAPPING SOUND FROM THE LEFT CYLINDER HEAD

Bulletin Number: 02-152-14R
REVISED VALVE TRAIN PARTS TO REDUCE A WARM ENGINE TAPPING SOUND FROM THE LEFT CYLINDER HEAD

Bulletin Number: 02-152-14R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-157-14FAQ
Oil Consumption Class Action Law Suit Frequently Asked Questions

Bulletin Number: 02-157-14N
Oil Consumption Class Action Claim Notice Clarification VIN break point clarification Memo. Recently SOA has become aware of some retailer questions regarding the VIN breakpoint information supplied as part of the class action notice.

Bulletin Number: 02-157-14R
2013-14MY Legacy and Outback Models with 2.5L FB Engines, 2011-14MY Forester Models with 2.5L FB Engines, 2015 MY Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines, 20

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
2013-14MY Legacy and Outback Models with 2.5L FB Engines - 2011-14MY Forester Models with 2.5L FB Engines - 2015 MY Forester (Manual Transmissions Only) with 2.5L FB Engines - 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines -

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
Revised Service Bulletin: Surface Treatment Change To Oil Control Piston Rings This bulletin announces information regarding a major change to the repair procedures previously outlined in Service Bulletins 02-143-13R, 02-144-13R and 02-145-

Bulletin Number: 02-157-14R
REVISED SERVICE BULLETIN: SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-

Bulletin Number: 02-157-14R
Refer to bulletin for engine/transmission type. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for exce

Bulletin Number: 02-157-14R
Refer to bulletin for engine/transmission type. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for exce

Bulletin Number: 02-157-14R
Refer to bulletin for engine/transmission type. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for exce

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS

Bulletin Number: 02-157-14R
As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oilconsumption on applicable vehicles to 8 years /

Bulletin Number: 02-157-14R
"THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PI

Bulletin Number: 02-157-14R
"THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PI

Bulletin Number: 02-157-14R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PIS

Bulletin Number: 02-157-14R
REVISED SERVICE BULLETIN: SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-

Bulletin Number: 02-157-14R
As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oilconsumption on applicable vehicles to 8 years /

Bulletin Number: 02-157-14R
As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oilconsumption on applicable vehicles to 8 years /

Bulletin Number: 02-157-14R
2013-14MY Legacy and Outback Models with 2.5L FB Engines, 2011-14MY Forester Models with 2.5L FB Engines, 2015 MY Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2.0 FB Engines, 20

Bulletin Number: 02-157-14R-4-13-
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicle

Bulletin Number: 02-157-14R-4-13-
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicle

Bulletin Number: 02-157-14R-4-28-
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicle

Bulletin Number: 02-157-14R-4-28-
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicle

Bulletin Number: 02-157-14R-4-28-
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable vehicle

Bulletin Number: 02-160-15
This Service Information bulletin provides revised procedures for inspection and measurement of the cylinder block assembly to determine whether or not replacement is necessary. Read through and understand this information completely before

Bulletin Number: 02-162-15
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-162-15R
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-164-16
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability

Bulletin Number: 02-166-17
This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis

Bulletin Number: 02-166-17R
This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis

Bulletin Number: 02-168-17
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.

Bulletin Number: 02-168-17
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound.

Bulletin Number: 02-170-17
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co

Bulletin Number: 02-170-17R
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn

Bulletin Number: 02-170-17R
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn

Bulletin Number: 02-173-18
2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrences of ice formation from condensation in the duct?s PCV system passages.

Bulletin Number: 02-173-18
2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.

Bulletin Number: 02-173-18
2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.

Bulletin Number: 02-173-18
2.0L Turbo Models only. This bulletin announces availability of a special turbocharger air intake duct designed to prevent EXTREMELY RARE occurrence of ice formation from condensation in the duct?s PCV system passages.

Bulletin Number: 02-177-18
In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re

Bulletin Number: 02-177-18
In conjunction with the launch of our new Remanufactured FB Engine Short Block Program, SOA would like to reinforce Core Return Policy (See Parts Policy & Procedures Manual ? Section 12.3 Core Returns ? Reman) and provide suggestions for re

Bulletin Number: 02-178-18R
This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.

Bulletin Number: 02-182-19
This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and be

Bulletin Number: 02-182-19
This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and be

Bulletin Number: 03-67-12R
SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. PLEASE CHECK APPLICATIONS AND AVAILABILITY THROUGH NORMAL PARTS CHANNELS PRIOR TO MAKING VEHI

Bulletin Number: 03-72-14
HILL START ASSIST (HSA) WARNING LIGHT, DTC C0076 - THIS BULLETIN PROVIDES INFORMATION TO ADDRESS A CUSTOMER CONCERN OF INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP.

Bulletin Number: 03-72-14
HILL START ASSIST (HSA) WARNING LIGHT, DTC C0076 - THIS BULLETIN PROVIDES INFORMATION TO ADDRESS A CUSTOMER CONCERN OF INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP.

Bulletin Number: 03-72-14
HILL START ASSIST (HSA) WARNING LIGHT, DTC C0076 - THIS BULLETIN PROVIDES INFORMATION TO ADDRESS A CUSTOMER CONCERN OF INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP.

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 04-13-14
NEW ELECTRIC POWER STEERING (EPS) CONTROL UNIT FOR DTC C2532

Bulletin Number: 04-13-14
NEW ELECTRIC POWER STEERING (EPS) CONTROL UNIT FOR DTC C2532

Bulletin Number: 04-13-14R
IMPORTANT: This Service Bulletin has been as been replaced by TSB 04-24-18 dated 11/9/2018 entitled ?Increased Steering Effort when Cold, DTC C2532?. Please refer to this new bulletin for the latest information regarding this condition.

Bulletin Number: 04-13-14R
SERVICE BULLETIN IF YOU RECEIVE A CUSTOMER CONCERN OF THE EPS WARNING LIGHT COMING ON AND DIAGNOSTICS SHOW A DTC C2532 STORED IN MEMORY, A NEW EPS CONTROL UNIT IS NOW AVAILABLE TO ADDRESS THIS CODE. THERE MAY ALSO BE A CUSTOMER CONCERN OF I

Bulletin Number: 04-13-14R
SERVICE BULLETIN IF YOU RECEIVE A CUSTOMER CONCERN OF THE EPS WARNING LIGHT COMING ON AND DIAGNOSTICS SHOW A DTC C2532 STORED IN MEMORY, A NEW EPS CONTROL UNIT IS NOW AVAILABLE TO ADDRESS THIS CODE. THERE MAY ALSO BE A CUSTOMER CONCERN OF I

Bulletin Number: 04162013
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 04-21-18
This bulletin announces availability of a new Electronic Power Steering (EPS) gear box assembly designed to address a VERY limited number of customer concerns regarding uneven steering effort felt when turning left or right. In areas where

Bulletin Number: 04-23-18
This Service Information bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or

Bulletin Number: 04-23-18R
This bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging

Bulletin Number: 04-23-18R
This bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging

Bulletin Number: 04-23-18R
This bulletin provides helpful tips to simplify the diagnosis of sound concerns originating in the electronic power steering (EPS) gearbox (steering rack) assembly. If a vehicle presents with a ?rattling?, ?knocking? or possibly a ?clanging

Bulletin Number: 04-24-18
This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during

Bulletin Number: 04-24-18
This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during

Bulletin Number: 05-57-14
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY.

Bulletin Number: 05-57-14
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY.

Bulletin Number: 05-57-14
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY.

Bulletin Number: 05-61-16
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.

Bulletin Number: 05-63-18
This bulletin announces a design change made to the forward bushing used in the front lower control arm to address customer concerns of a rattle-type sound and / or a possible vibration felt in the steering wheel. The material for the cushi

Bulletin Number: 05-69-19
This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust.

Bulletin Number: 05-69-19
This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust.

Bulletin Number: 06-45-13R
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE GUIDELINES FOR PROPER POSITIONING OF ETC DEVICES, I.E., EZ PASS, SUN PASS, K-TAG, ETC, IN VEHICLES EQUIPPED WITH THE NEW EYESIGHT SYSTEM. REFER TO THE EYESIGHT OWNER MANUAL AND THE APPLICABLE SERVI

Bulletin Number: 06-45-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 06-46-14
REVISED BRAKE LIGHT SWITCH ADJUSTMENT PROCEDURE FOR DTCS C1531 AND C0054

Bulletin Number: 06-46-14R
THIS BULLETIN PROVIDES A REVISED ADJUSTMENT PROCEDURE TO BE USED WHEN DIAGNOSING BRAKE LIGHT SWITCH (BLS) -RELATED DTCS C1531 AND/OR C0054. IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE.

Bulletin Number: 06-47-14
REVISION TO TROUBLESHOOTING INFORMATION FOR VDC DTC C0071

Bulletin Number: 06-47-14
REVISION TO TROUBLESHOOTING INFORMATION FOR VDC DTC C0071

Bulletin Number: 06-48-15
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE STOP LIGHT SWITCH TO REDUCE THE POSSIBILITY OF IMPROPER ILLUMINATION OF THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE IL

Bulletin Number: 06-48-15
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE STOP LIGHT SWITCH TO REDUCE THE POSSIBILITY OF IMPROPER ILLUMINATION OF THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE IL

Bulletin Number: 06-48-15R
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE STOP LIGHT SWITCH TO REDUCE THE POSSIBILITY OF IMPROPER ILLUMINATION OF THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE IL

Bulletin Number: 06-50-15
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPE

Bulletin Number: 06-50-15
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPE

Bulletin Number: 06-50-15
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPE

Bulletin Number: 06-51-15
THIS BULLETIN ANNOUNCES AVAILABILITY OF A NEW FRONT DISC BRAKE PAD, SHIM, GREASE AND CLIP KIT DESIGNED TO REDUCE CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN

Bulletin Number: 06-51-15R
THIS BULLETIN ANNOUNCES AVAILABILITY OF A NEW FRONT DISC BRAKE PAD, SHIM, GREASE AND CLIP KIT DESIGNED TO REDUCE CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE SLOTTED SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN

Bulletin Number: 06-51-15R
This bulletin announces availability of a new front disc brake pad, shim, grease and clip kit designed to reduce customer concerns of excessive brake squeal. This new kit eliminates the âslotted❠shim which previously was installed betw

Bulletin Number: 06-55-16R
EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lub

Bulletin Number: 06-55-16R
(ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is

Bulletin Number: 06-55-16R
(ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is

Bulletin Number: 06-55-16R
This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for

Bulletin Number: 06-59-17R
This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design

Bulletin Number: 06-61-18
This bulletin announces availability of new VDC Control Module & Hydraulic Units (VDCCM&H/U) to address isolated customer concerns of the green Hill Holder light blinking and cancel warning alarm sounding during cranking / starting the

Bulletin Number: 06-68-19R
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o

Bulletin Number: 07-103-15
THIS SERVICE INFORMATION BULLETIN ANNOUNCES A NEW REQUIREMENT REGARDING ONE-TIME USE PARTS WHICH MUST REPLACED WHENEVER DISCONNECTING OR REPLACING THE PRG ROD. THE SPRING STEEL RETAINING CLIPS (STOP RINGS) WHICH LOCK THE PRG ROD TO THE BALL

Bulletin Number: 07-108-16
This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760 / Sensor Mat Abnormal. This information replaces the current procedure until the Service Manual is updated in the near future.

Bulletin Number: 07-108-16
This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760 / Sensor Mat Abnormal. This information replaces the current procedure until the Service Manual is updated in the near future.

Bulletin Number: 07-108-16
This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760 / Sensor Mat Abnormal. This information replaces the current procedure until the Service Manual is updated in the near future.

Bulletin Number: 07-108-16R
This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795

Bulletin Number: 07-108-16R
This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795

Bulletin Number: 07-108-16R
This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760- Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedu

Bulletin Number: 07-108-16R
This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795

Bulletin Number: 07-108-16R
This Service Information bulletin provides a procedure for diagnosis of Occupant Detection System (ODS) DTC B1760- Sensor Mat Abnormal and/or B1650- Occupant Classification System Malfunction. This information replaces the current procedu

Bulletin Number: 07-108-16R
This Service Information Bulletin provides a revised troubleshooting procedure and tips to follow when diagnosing a DTC B1650- ?Occupant Classification System Malfunction?. This DTC may also be accompanied by B1760, B1761, B1771 or B1795 as

Bulletin Number: 07-112-16R
New Alternator Assembly. This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator?s current output outside of the specified limits.

Bulletin Number: 07-112-16R
2.5L MODELS ONLY. This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator's current output outside of the specified limits.

Bulletin Number: 07-112-16R
New Alternator Assembly. This bulletin provides a procedure for diagnosis and repair of DTC P0300 which may result from fluctuation of the alternator?s current output outside of the specified limits.

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s warni

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system

Bulletin Number: 07-130-18
This bulletin describes a design change to the center bracket component of the window regulator assembly. The change was made to address customer concerns of the front door glass shuddering while opening or closing. Moisture accumulation

Bulletin Number: 07-133-18
This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso

Bulletin Number: 07-133-18
2.0L Turbor Models only. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may

Bulletin Number: 07-133-18
2.0L Turbor Models only. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may

Bulletin Number: 07-133-18
2.0L Turbor Models only. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may

Bulletin Number: 07-136-18
TURBO MODELS ONLY. This bulletin announces availability of new parts to address a limited number of reports involving an engine vibration felt when at idle after the engine is up to operating temperature. In some cases, the above engine m

Bulletin Number: 07-138-18
This Service Information bulletin announces the standardization of the IG2 and ACC relays used on the models listed. Both of these relays are located on the back (front facing) side of the passenger compartment fuse box (F/B).

Bulletin Number: 07-152-19
This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re

Bulletin Number: 07-152-19
This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to re

Bulletin Number: 07-152-19R
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl

Bulletin Number: 07-152-19R
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl

Bulletin Number: 07-152-19R
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ⢠Power windows inoperative from the driverâs door master and / or passenger front door switch ⢠Unabl

Bulletin Number: 07-154-19
This Service Information bulletin provides a revised Step to follow when diagnosing a DTC B2513- LATCH CONDITION FAILURE. The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The

Bulletin Number: 07-154-19
This Service Information bulletin provides a revised Step to follow when diagnosing a DTC B2513- LATCH CONDITION FAILURE. The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The

Bulletin Number: 07-74-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-75-13
"THIS BULLETIN PROVIDES INFORMATION REGARDING DTC P0606 RELATED SPECIFICALLY TO THE DETERMINATION OF THIS CODE ON 2014 FORESTER TURBO MODELS. THE ENGINE MANAGEMENT SYSTEM IS EQUIPPED WITH A BACK-UP MEMORY. WHEN DISCONNECTING THE BATTERY CAB

Bulletin Number: 07-75-13
"THIS BULLETIN PROVIDES INFORMATION REGARDING DTC P0606 RELATED SPECIFICALLY TO THE DETERMINATION OF THIS CODE ON 2014 FORESTER TURBO MODELS. THE ENGINE MANAGEMENT SYSTEM IS EQUIPPED WITH A BACK-UP MEMORY. WHEN DISCONNECTING THE BATTERY CAB

Bulletin Number: 07-75-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-75-13R
On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back ?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate

Bulletin Number: 07-75-13R
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models. The engine management system is equipped with a back-up memory. When disconnecting t

Bulletin Number: 07-75-13R
On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back ?ON? within one minute after the first time the ignition is turned ?OFF?, it becomes possible for the CEL to illuminate

Bulletin Number: 07-76-13R
"THIS BULLETIN PROVIDES A MORE DETAILED REVIEW OF THE PROCEDURES FOR RE-INITIALIZING THE PRG SYSTEM WHICH IS ALREADY OUTLINED AS PART OF THE SERVICE MANUAL DIAGNOSTICS. IF YOU RECEIVE A CUSTOMER CONCERN OF AN INOPERATIVE POWER REAR GATE, AF

Bulletin Number: 07-76-13R
"THIS BULLETIN PROVIDES A MORE DETAILED REVIEW OF THE PROCEDURES FOR RE-INITIALIZING THE PRG SYSTEM WHICH IS ALREADY OUTLINED AS PART OF THE SERVICE MANUAL DIAGNOSTICS. IF YOU RECEIVE A CUSTOMER CONCERN OF AN INOPERATIVE POWER REAR GATE, AF

Bulletin Number: 07-76-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-80-13
THIS BULLETIN PROVIDES ADDITIONAL INFORMATION (SEE TSB 07-76-13R DATED 7/8/2013) REGARDING THE PRG SYSTEM OPERATION AND INITIALIZATION PROCEDURE. IF YOU RECEIVE A CUSTOMER CONCERN OF A BEEPBEEP- BEEP SOUND WHEN TRYING TO OPERATE THE PRG,

Bulletin Number: 07-80-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-80-13R
POWER REAR GATE (PRG) INOPERATIVE, INCOMPLETE INITIALIZATION PROCEDURE

Bulletin Number: 07-80-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-80-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 07-80-13R
POWER REAR GATE (PRG) INOPERATIVE, INCOMPLETE INITIALIZATION PROCEDURE

Bulletin Number: 07-80-13R
POWER REAR GATE (PRG) INOPERATIVE, INCOMPLETE INITIALIZATION PROCEDURE

Bulletin Number: 07-83-14
DIAGNOSTICS FOR DTC B1500 AND U1500

Bulletin Number: 07-83-14
DIAGNOSTICS FOR DTC B1500 AND U1500

Bulletin Number: 07-85-14
MEASUREMENT OF DARK CURRENT (PARASITIC BATTERY DRAW)

Bulletin Number: 07-97-15
THERE HAVE BEEN A SMALL NUMBER OF REPORTS STATING THE FINISH OF THE EYESIGHT STEREO CAMERA TRIM COVER IS PEELING. THIS BULLETIN ANNOUNCES A CHANGE TO THE PAINT MATERIAL TO ELIMINATE THE CONDITION AND INSTRUCTIONS FOR ORDERING THE REPLACEMEN

Bulletin Number: 08-39-15
THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F

Bulletin Number: 08-39-15
THIS SERVICE INFORMATION BULLETIN PROVIDES A PROCEDURE FOR RESETTING THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD. WHENEVER REPLACING THE MFD AND / OR COMBINATION METER, THE LIFETIME FUEL CONSUMPTION FUNCTION OF THE MFD MUST BE RESET F

Bulletin Number: 09-55-13
THIS BULLETIN INFORMS OF CHANGES TO BOTH THE PADDING ON THE FUEL TANK ASSEMBLY AND THE CUSHIONS FOUND ON THE FUEL DELIVERY TUBING CONNECTING THE MAIN FUEL PUMP ASSEMBLY TO THE SUB-LEVEL UNIT (TRANSFER PUMP).

Bulletin Number: 09-55-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 09-55-13
THIS BULLETIN INFORMS OF CHANGES TO BOTH THE PADDING ON THE FUEL TANK ASSEMBLY AND THE CUSHIONS FOUND ON THE FUEL DELIVERY TUBING CONNECTING THE MAIN FUEL PUMP ASSEMBLY TO THE SUB-LEVEL UNIT (TRANSFER PUMP).

Bulletin Number: 09-55-13
THIS BULLETIN INFORMS OF CHANGES TO BOTH THE PADDING ON THE FUEL TANK ASSEMBLY AND THE CUSHIONS FOUND ON THE FUEL DELIVERY TUBING CONNECTING THE MAIN FUEL PUMP ASSEMBLY TO THE SUB-LEVEL UNIT (TRANSFER PUMP).

Bulletin Number: 09-56-13
A COUNTERMEASURE THERMOSTAT HAS BEEN RELEASED TO ADDRESS A RARE CONDITION WHICH MAY OCCUR DURING ENGINE SOAK IN COLD AMBIENT TEMPERATURES. IN THESE RARE CASES, AFTER AN EXTENDED COLD SOAK, COOLANT MAY ENTER THE THERMOSTATS INTERNAL PISTON

Bulletin Number: 09-63-16
THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR.

Bulletin Number: 09-64-16
This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. T

Bulletin Number: 096516R
REVISED. This bulletin announces a design change of the fuel injector used on 2.0L DIT models to prevent water intrusion. A new silicone rubber cover has been developed and incorporated into production for this purpose.

Bulletin Number: 10-83-15
THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR

Bulletin Number: 10-83-15R
Models with Manual HVAC Systems only. This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed sw

Bulletin Number: 10-84-16
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate

Bulletin Number: 10-84-16
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate

Bulletin Number: 10-84-16R
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate

Bulletin Number: 10-84-16R
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate

Bulletin Number: 10-84-16R
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate

Bulletin Number: 10-86-17R
A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating.

Bulletin Number: 110PO
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11120AA111
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-123-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-130-13
THIS BULLETIN PROVIDES INSPECTION AND REPAIR PROCEDURES FOR INTAKE AND EXHAUST CAMSHAFT POSITION-RELATED AND/OR ENGINE MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE. THE CAMSHAFT POSITION SENSOR (CPS) CLEARANCE MAY BE O

Bulletin Number: 11-130-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-130-13R
THIS BULLETIN PROVIDES INSPECTION AND REPAIR PROCEDURES FOR INTAKE AND EXHAUST CAMSHAFT POSITION-RELATED AND/OR ENGINE MISFIRE DTCS FOR THE FA AND FB ENGINE-EQUIPPED MODELS LISTED ABOVE. THE CAMSHAFT POSITION SENSOR (CPS) CLEARANCE MAY BE O

Bulletin Number: 11-130-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-132-13
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ADDRESS AN IMPROPER JUDGMENT OF INTAKE MANIFOLD PRESSURE WHEN THE ENGINE IS COLD WHICH COULD CAUSE DTC P0244 TO SET. THESE FILES ARE INCLUDED IN THE JULY, 2013 SSMIII SO

Bulletin Number: 11-132-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-132-13
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ADDRESS AN IMPROPER JUDGMENT OF INTAKE MANIFOLD PRESSURE WHEN THE ENGINE IS COLD WHICH COULD CAUSE DTC P0244 TO SET. THESE FILES ARE INCLUDED IN THE JULY, 2013 SSMIII SO

Bulletin Number: 11-134-13
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ENHANCE SET SPEED STABILITY WHEN OPERATING THE VEHICLE ON MOUNTAINOUS ROADS. THIS UPDATE DOES NOT AFFECT ANY OPERATION OF EYESIGHT ADAPTIVE OR EYESIGHT CONVENTIONAL CRUI

Bulletin Number: 11-134-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-134-13
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ENHANCE SET SPEED STABILITY WHEN OPERATING THE VEHICLE ON MOUNTAINOUS ROADS. THIS UPDATE DOES NOT AFFECT ANY OPERATION OF EYESIGHT ADAPTIVE OR EYESIGHT CONVENTIONAL CRUI

Bulletin Number: 11-134-13R
ECM REPROGRAMMING FOR ENHANCEMENT OF CRUISE CONTROL SET SPEED STABILITY - THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ENHANCE SET SPEED STABILITY WHEN OPERATING THE VEHICLE ON MOUNTAINOUS ROADS. THIS UPDATE DOES N

Bulletin Number: 11-134-13R
ECM REPROGRAMMING FOR ENHANCEMENT OF CRUISE CONTROL SET SPEED STABILITY - THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ENHANCE SET SPEED STABILITY WHEN OPERATING THE VEHICLE ON MOUNTAINOUS ROADS. THIS UPDATE DOES N

Bulletin Number: 11-134-13R
ECM REPROGRAMMING FOR ENHANCEMENT OF CRUISE CONTROL SET SPEED STABILITY - THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ENHANCE SET SPEED STABILITY WHEN OPERATING THE VEHICLE ON MOUNTAINOUS ROADS. THIS UPDATE DOES N

Bulletin Number: 11-139-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-140-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-140-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-146-14
REPROGRAMMING FILES FOR DTC P0420

Bulletin Number: 11-146-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-148-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-148-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-148-14R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-148-14R
REPROGRAMMING FILE AVAILABILITY FOR OIL LEVEL DETECTION

Bulletin Number: 11-148-14R
REPROGRAMMING FILE AVAILABILITY FOR OIL LEVEL DETECTION

Bulletin Number: 11-148-14R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 11-148-14R
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF REPROGRAMMING FILES AND A REVISED OIL LEVEL SWITCH TO OPTIMIZE THE ECM LOGIC FOR ENGINE OIL LEVEL DETECTION IN THE EVENT OF FALSE OR PREMATURE LOW ENGINE OIL LEVEL WARNING LAMP ILLUMINATION. REVIS

Bulletin Number: 11-153-15R
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO ADDRESS CUSTOMER CONCERNS OF EXTENDED CRANKING TIME BEFORE THE ENGINE STARTS.

Bulletin Number: 11-153-15R
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO ADDRESS CUSTOMER CONCERNS OF EXTENDED CRANKING TIME BEFORE THE ENGINE STARTS.

Bulletin Number: 11-164-16
Dated 4/29/2016 although posted on 5/2/2016. 2.0L DI Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engi

Bulletin Number: 11-164-16R
This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000-2500 RPM on light acceleration du

Bulletin Number: 11-164-16R
This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000-2500 RPM on light acceleration du

Bulletin Number: 11-164-16R
This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000-2500 RPM on light acceleration du

Bulletin Number: 11-169-16
Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on accel

Bulletin Number: 11-169-16
Turbo models only. This bulletin announces the availability of reprogramming files to optimize the ECM. These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on accel

Bulletin Number: 11-169-16R
This bulletin announces the availability of reprogramming files to optimize the ECM. These new files will address customer concerns of: ? Spark knock (ping) during high intake air temperature operation ? Surge on acceleration due to phantom

Bulletin Number: 11-173-17
This bulletin announces availability of ECM reprogramming files designed to optimize the ECM for improving HVAC blower fan speed control. There have been a limited number of cases with reports describing the blower fan speed fluctuating /

Bulletin Number: 11-173-17
This bulletin announces availability of ECM reprogramming files designed to optimize the ECM for improving HVAC blower fan speed control. There have been a limited number of cases with reports describing the blower fan speed fluctuating /

Bulletin Number: 11-187-18
This bulletin announces reprogramming file availability to optimize the ECM and address isolated customer concerns of hesitation on acceleration. The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR)

Bulletin Number: 11-187-18
This bulletin announces reprogramming file availability to optimize the ECM and address isolated customer concerns of hesitation on acceleration. The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR)

Bulletin Number: 11-187-18
This bulletin announces reprogramming file availability to optimize the ECM and address isolated customer concerns of hesitation on acceleration. The new logic provides enhanced ignition timing control during Exhaust Gas Recirculation (EGR)

Bulletin Number: 12-131-12R
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE PROCEDURES FOR THE DIAGNOSIS AND REPAIR OF OIL SEEPAGE WHICH MAY BE COMING FROM THE TIMING CHAIN COVER, FRONT CAMSHAFT CAP, CAMSHAFT CARRIER AND / OR UPPER OIL PAN.

Bulletin Number: 12-150-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-151-13
If you receive a customer concern of the front door checkers not holding the doors securely enough in the half or fully open positions, this Bulletin informs of a change made to increase the detent force of the front door checker mechanism.

Bulletin Number: 12-151-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-151-13R
IF YOU RECEIVE A CUSTOMER CONCERN OF THE FRONT DOOR CHECKERS NOT HOLDING THE DOORS SECURELY ENOUGH IN THE HALF OR FULLY OPEN POSITIONS, THIS BULLETIN INFORMS OF A CHANGE WHICH ADDS 2 ADDITIONAL HOLDING POSITIONS AND AN INCREASE TO THE DETEN

Bulletin Number: 12-151-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-154-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-154-13
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE INFORMATION CONCERNING ACCEPTABLE WINDSHIELD REPAIR AREAS ON 2014MY FORESTER VEHICLES EQUIPPED WITH THE EYESIGHT SYSTEM. REFER TO THE EYESIGHT OWNER MANUAL AND THE APPLICABLE SERVICE MANUAL FOR MOR

Bulletin Number: 12-157-13R
THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A CUSTOMER CONCERN OF A RATTLE OR BUZZING-TYPE SOUND COMING FROM THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND /

Bulletin Number: 12-157-13R
THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A CUSTOMER CONCERN OF A RATTLE OR BUZZING-TYPE SOUND COMING FROM THE LOWER PORTION OF THE A PILLAR TRIM WHILE DRIVING OVER BUMPY OR ROUGH ROAD SURFACES. THE LOWER INSERTION CLAWS AND /

Bulletin Number: 12-158-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-158-13
THIS BULLETIN PROVIDES A PROCEDURE TO ELIMINATE AN UNEVEN GAP BETWEEN THE BASE OF THE A PILLAR TRIM AND THE TWEETER SPEAKER GRILLE AS SHOWN IN THE BEFORE AND AFTER PHOTOS BELOW.

Bulletin Number: 12-163-14
REVISED SUNROOF DEFLECTOR FOR RATTLING SOUND

Bulletin Number: 12-174-14
INSTRUMENT PANEL SIDE VENTS COMING LOOSE - TO ADDRESS CUSTOMER CONCERNS OF THE INSTRUMENT PANEL SIDE DASH GRILLE VENT ASSEMBLY COMING LOOSE, THE RETAINING CLAW PORTION HAS BEEN REDESIGNED TO PROVIDE BETTER RETENTION.

Bulletin Number: 12-174-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-175-14
DESIGN CHANGE TO REAR DOOR POWER WINDOW REGULATOR

Bulletin Number: 12-175-14
DESIGN CHANGE TO REAR DOOR POWER WINDOW REGULATOR

Bulletin Number: 12-175-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 12-175-14
DESIGN CHANGE TO REAR DOOR POWER WINDOW REGULATOR

Bulletin Number: 12-195-15
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S

Bulletin Number: 12-195-15
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE S

Bulletin Number: 12-204-16R
This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a ?twisting? condition. This can occur while driving on r

Bulletin Number: 12-204-16R
This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a "twisting" condition. This can occur while driving on

Bulletin Number: 12-204-16R
This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a "twisting" condition. This can occur while driving on

Bulletin Number: 12-204-16R
This bulletin provides potential source locations and procedures to help isolate areas of the vehicle which may be generating popping, clicking or creaking sounds when the body is in a ?twisting? condition. This can occur while driving on r

Bulletin Number: 12-205-16
This bulletin provides a procedure to address a limited number of customer concerns regarding a visible depression or dent which may be noticeable in the roof trim panel (head liner) over the front, center portion of the cargo area.

Bulletin Number: 1221717
This bulletin announces a design change made to the front seat outer hinge cover trim panels. In some cases, when exiting the vehicle, the trim panel may inadvertently get kicked and become dislodged from the seat cushion assembly. The sh

Bulletin Number: 12-231-18
( 2017-2018MY Impreza - 5 Dr Only)

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-234-18
This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion be

Bulletin Number: 12-234-18
This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushi

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 13-96-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 13-96-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 14-22-16R
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Bulletin Number: 15-164-13
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE 6 DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN USING THE F10 AUDIO / NAVIGATION SYSTEM.

Bulletin Number: 15-164-13R
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE 6 DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN USING THE F10 AUDIO / NAVIGATION SYSTEM. WE WILL CONTINUE TO ADD MORE HELPFUL TIPS TO THIS TSB AS INFORMATION IS R

Bulletin Number: 15-166-13R
THIS BULLETIN PROVIDES THE PROCEDURE FOR REPROGRAMMING THE F10 SD CARD NAVIGATION SYSTEM WITH THE LATEST SOFTWARE VERSION.

Bulletin Number: 15-166-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-166-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-166-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-166-13R
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-166-13R
THIS BULLETIN PROVIDES THE PROCEDURE FOR REPROGRAMMING THE F10 SD CARD NAVIGATION SYSTEM WITH THE LATEST SOFTWARE VERSION.

Bulletin Number: 15-168-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-168-13
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR SERVICE POLICI

Bulletin Number: 15-168-13R
2014 EXCHANGE COMPONENT IDENTIFICATION AND PROCEDURES - AUDIO UNITS

Bulletin Number: 15-168-13R
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR SERVICE POLICI

Bulletin Number: 15-168-13R
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2.10 OF YOUR SERVICE POLICI

Bulletin Number: 15-168-13R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Service Poli

Bulletin Number: 15-168-13R
2014 EXCHANGE COMPONENT IDENTIFICATION AND PROCEDURES - AUDIO UNITS

Bulletin Number: 15-168-13R
2014 EXCHANGE COMPONENT IDENTIFICATION AND PROCEDURES - AUDIO UNITS

Bulletin Number: 15-173-14
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 15-179-15R
THIS SERVICE INFORMATION BULLETIN CONTAINS A SERIES OF SCREEN SHOTS WITH INSTRUCTIONS WHICH PROVIDE A PROCEDURE FOR PAIRING ANDROID SMARTPHONES TO BLUETOOTH-EQUIPPED CLARION AUDIO UNITS. THE PROCEDURE INVOLVES CHANGING THE AUDIO UNITS DEFA

Bulletin Number: 15-184-15
THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A PLEASE CHECK AUDIO SYSTEM MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE RE

Bulletin Number: 15-184-15R
THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A PLEASE CHECK AUDIO SYSTEM MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE RE

Bulletin Number: 15-185-15
THIS SERVICE INFORMATION BULLETIN IS INTENDED TO PROVIDE HELPFUL INSIGHT TO USE WHEN RESPONDING TO CUSTOMER INQUIRIES INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE

Bulletin Number: 15-185-15R
THIS SERVICE INFORMATION BULLETIN IS INTENDED TO PROVIDE HELPFUL INSIGHT TO USE WHEN RESPONDING TO CUSTOMER INQUIRIES INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. THIS INCLUDES CUSTOMER CONCERNS WHERE THE PHONE

Bulletin Number: 15-186-15
"THIS BULLETIN ANNOUNCES REPROGRAMMING FILE AVAILABILITY AND A CORRESPONDING INSTALLATION PROCEDURE WHICH WILL ALLOW BLUETOOTH PAIRING TO BE COMPLETED SUCCESSFULLY WHEN USING VOICE COMMANDS ON THE CLARION AUDIO UNITS LISTED BELOW. PAIRING

Bulletin Number: 15-186-15R
"THIS BULLETIN ANNOUNCES REPROGRAMMING FILE AVAILABILITY AND A CORRESPONDING INSTALLATION PROCEDURE WHICH WILL ALLOW BLUETOOTH PAIRING TO BE COMPLETED SUCCESSFULLY WHEN USING VOICE COMMANDS ON THE CLARION AUDIO UNITS LISTED BELOW. PAIRING O

Bulletin Number: 1518615R
WITH CLARION AUDIO UNITS ONLY. REVISED. This bulletin announces reprogramming file availability and a corresponding installation procedure which will allow Bluetooth pairing to be completed successfully when using voice commands on the C

Bulletin Number: 15-193-16
This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and opera

Bulletin Number: 15-193-16
This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software-related updates and opera

Bulletin Number: 15-193-16
THIS BULLETIN ANNOUNCES A NEW PROCEDURE FOR UPDATING THE OPERATING SOFTWARE USED IN F10 GEN1 AUDIO / NAVIGATION SYSTEMS. THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERA

Bulletin Number: 15-193-16
THIS BULLETIN ANNOUNCES A NEW PROCEDURE FOR UPDATING THE OPERATING SOFTWARE USED IN F10 GEN1 AUDIO / NAVIGATION SYSTEMS. THIS NEW PROCEDURE ELIMINATES THE NEED TO EXCHANGE THE HEAD UNIT / SD CARD TO OBTAIN SOFTWARE-RELATED UPDATES AND OPERA

Bulletin Number: 15-193-16R
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new proced

Bulletin Number: 15-193-16R
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new proced

Bulletin Number: 15-222-18
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio

Bulletin Number: 15-222-18
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion intrusio

Bulletin Number: 16-102-16
TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE.

Bulletin Number: 16-103-16
Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o

Bulletin Number: 16-103-16
Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source o

Bulletin Number: 16-103-16R
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'

Bulletin Number: 16-103-16R
"This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVTâ

Bulletin Number: 16-103-16R
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT?s

Bulletin Number: 16-103-16R
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified a likely source of the seepage to be the sealant used on the CVT'

Bulletin Number: 16-107-17
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model

Bulletin Number: 16-107-17
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model

Bulletin Number: 16-107-17R
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model

Bulletin Number: 16-107-17R
2010-15 Legacy/ Outback 2.5L NA CVT, 2015 Legacy/ Outback 3.6L NA CVT, 2012-15 Impreza 2.0L NA CVT, 2013-15 Crosstrek 2.0L NA CVT, 2014-15 Crosstrek Hybrid CVT 2014-15 Forester 2.5L NA CVT 2014-15 Forester 2.0L Turbo CVT 2015 WRX 2.0L Turbo

Bulletin Number: 16-107-17R
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model

Bulletin Number: 16-107-17R
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and model

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-112-18R
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contaminati

Bulletin Number: 16-119-19
This Service Information bulletin announces availability of a new control valve assembly (valve body) designed to prevent false detection of DTC P0841 and / or illumination of the AT Temp light. Testing has revealed in some limited cases, a

Bulletin Number: 16-120-19
This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i

Bulletin Number: 16-120-19
This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i

Bulletin Number: 16-120-19
This bulletin provides a procedure to follow for addressing customer concerns of a shuddering condition or chattering -type sound heard or felt when making sharp turns. If an applicable vehicle presents with the condition as described, it i

Bulletin Number: 16-89-13
THIS SERVICE INFORMATION ANNOUNCEMENT PROVIDES INFORMATION REGARDING THREE NEW PRODUCTION ENHANCEMENTS TO THE CVT TRANSMISSION (MODEL TR690) USED IN THE FORESTER MODEL WITH 2.0L DIT(DIRECT INJECTION TURBO) ENGINE: AN IN-LINE CVT FLUID FI

Bulletin Number: 16-89-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 16-97-15
THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT

Bulletin Number: 17-17-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 17-17-13
"NOTE: THE AIRBAG SYSTEMS USED ON PREVIOUS AND CURRENT WRX, STI AND TRIBECA MODELS ARE NOT EQUIPPED WITH EDR FUNCTIONALITY. THIS BULLETIN PROVIDES INFORMATION REGARDING EVENT DATA RECORDER (EDR) FUNCTIONALITY WHICH HAS BEEN INCORPORATED INT

Bulletin Number: 17-17-13R
This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 17-17-13R
This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.

Bulletin Number: 18-173-13
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-173-13
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-173-13
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-179-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE.

Bulletin Number: 18-181-15 (2)
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec

Bulletin Number: 18-182-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-182-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-184-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-186-16
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec

Bulletin Number: 18-192-18
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec

Bulletin Number: 18-195-18
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for bec

Bulletin Number: 18460AA030
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 18667822782
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 2014SEPT
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 4222013
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 5-2014
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 8-1-2014
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: 86271FJ600
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: CVT
THIS ANNOUNCEMENT RELATES TO SPECIFIC 2014 FORESTER 2.5 NON]TURBO CVT MODELS WHICH HAVE BEEN IDENTIFIED AS HAVING AN EXCESS AMOUNT OF FLUID IN THE CVT TRANSMISSION. ALTHOUGH WE HAVE LIMITED THIS SITUATION, SOME OF THE AFFECTED VEHICLES WIL

Bulletin Number: CVTF
"THE NEW 2014 TURBO FORESTER IS EQUIPPED WITH A NEW CONTINUOUSLY VARIABLE TRANSMISSION (CVT). THIS NEW CVT UTILIZES A NEW TRANSMISSION FLUID, SUBARU HIGH TORQUE CVT FLUID AND IS ORANGE IN COLOR. THE CVT FLUID CURRENTLY BEING USED IN THE N

Bulletin Number: EQMRS
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: FCFM
This is to advise you of the current situation for supply of 2014 Forester Carpet Floor Mats. SOA sincerely appreciates the difficulty that dealers are encountering by not having mats for the new Forester. Please understand that we are taki

Bulletin Number: FCFM2
We have good news to report. Forester Carpet Floor Mats are now in production with a new supplier, and we will be shipping product starting next Monday, June 3. Mats will be shipped to every dealer, based on vehicles subject to the recall a

Bulletin Number: FCFMU
WE WOULD LIKE TO FOLLOW UP ON THE 2014 FORESTER FLOOR MAT REPLACEMENT PROCESS. AT THIS POINT, CUSTOMERS SHOULD HAVE RECEIVED THEIR REPLACEMENT FLOOR MATS FROM THEIR DEALERSHIP FOR VEHICLES THAT WERE SOLD WITHOUT FLOOR MATS. HOWEVER, WE HAVE

Bulletin Number: FCFMU3
"WE WOULD LIKE TO ANNOUNCE THAT BEGINNING MONDAY, JUNE 17TH, ALL 2014 SUBARU FORESTERS SHIPPING FROM THE RICHMOND AND SDC PORT FACILITIES WILL COME WITH THE NEW CARPETED FLOOR MATS. THE SNE PORT FACILITY WILL BEGIN SHIPPING 2014 FORESTERS

Bulletin Number: FCFMU3
"WE WOULD LIKE TO ANNOUNCE THAT BEGINNING MONDAY, JUNE 17TH, ALL 2014 SUBARU FORESTERS SHIPPING FROM THE RICHMOND AND SDC PORT FACILITIES WILL COME WITH THE NEW CARPETED FLOOR MATS. THE SNE PORT FACILITY WILL BEGIN SHIPPING 2014 FORESTERS

Bulletin Number: H001SSG000
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: J501SSG300
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: J501SSG301
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: NAVI Q3-2012
ALL SUBARU OWNERS WITH 2012MY & 2013MY FACTORY NAVIGATION MAY NOW DOWNLOAD THE LATEST MAPSET DATA FROM NOKIA/NAVTEQ AVAILABLE Q3 2012.

Bulletin Number: NAVISD
IN APPRECIATION FOR PURCHASING A SUBARU VEHICLE WITH NAVIGATION, SUBARU OF AMERICA, INC. (SOA) IS OFFERING OWNERS OF 2014MY FORESTER VEHICLES MANUFACTURED BEFORE JUNE 20, 2013, A COMPLIMENTARY NAVIGATION SD CARD UPDATE WITH FREE INSTALLATIO

Bulletin Number: NAVI- SYSTEM-1
GEN I SD CARD NAVIGATION SYSTEM TROUBLE SHOOTING GUIDE

Bulletin Number: NAVI- SYSTEM-1
GEN I SD CARD NAVIGATION SYSTEM TROUBLE SHOOTING GUIDE

Bulletin Number: NAVIU
REMINDER:IN APPRECIATION FOR PURCHASING A SUBARU VEHICLE WITH NAVIGATION, SUBARU OF AMERICA, INC. (SOA) IS OFFERING OWNERS OF 2014MY FORESTER VEHICLES MANUFACTURED BEFORE JUNE 20, 2013, A COMPLIMENTARY NAVIGATION SD CARD UPDATE WITH FREE IN

Bulletin Number: PEOCCAS
"PROPOSED ENGINE OIL CONSUMPTION CLASS ACTION SETTLEMENT RECENTLY YOU MAY HAVE SEEN VARIOUS ONLINE AND OTHER MEDIA ARTICLES REGARDING SUBARU OF AMERICA, INC. REACHING A PROPOSED SETTLEMENT IN A CLASS ACTION LAWSUIT FOR ALLEGED OIL CONSUMPT

Bulletin Number: PM02
ADDITIONS TO REMANUFACTURED TRANSMISSION APPLICATIONS

Bulletin Number: PNS0A868V9245
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: QMR
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: QMR01
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: RESTSG
RES Forester(2014) Troubleshooting Guide

Bulletin Number: SB-04-13-14R
SUBARU: AN ISSUE OF INCREASE STEERING EFFORT, ELECTRIC POWER STEERING (EPS) WARNING LIGHT COMES ON WITH DIAGNOSTIC TROUBLE CODE (DTC) C2532 AND TO ADDRESS CODE A NEW EPS CONTROL UNIT THAT IS AVAILABLE. MODEL 2014 FORESTER, 2012-14 IMPREZ

Bulletin Number: SB-06-48-15
SUBARU: ON SOME VEHICLES, TO REDUCE POSSIBILITY OF IMPROPER ILLUMINATION, A CHANGE IN DESIGN FOR STOP LIGHT SWITCH FOR ABS AND/OR VDC WARNING LAMP. MODELS 2012-14 IMPREZA, XV CROSSTREK (EXCEPT HYBRID), 2008-14 WRX, STI, 2014 FORESTER.

Bulletin Number: SB-06-48-15
SUBARU: ON SOME VEHICLES, TO REDUCE POSSIBILITY OF IMPROPER ILLUMINATION, A CHANGE IN DESIGN FOR STOP LIGHT SWITCH FOR ABS AND/OR VDC WARNING LAMP. MODELS 2012-14 IMPREZA, XV CROSSTREK (EXCEPT HYBRID), 2008-14 WRX, STI, 2014 FORESTER.

Bulletin Number: SB-06-50-15
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: SB-06-50-15
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: SB-07-59-07R
SUBARU: THE FORMATION OF MOISTURE AND/OR CONDENSATION, INSIDE OF REAR COMBINATION AND HEADLAMPS, IS TEMPORARY, AND WILL EVAPORATE WHEN TEMPERATURE RISES INSIDE LAMPS. MODEL ALL. NO YEARS LISTED. *PE

Bulletin Number: SB-07-59-07R
SUBARU: THE FORMATION OF MOISTURE AND/OR CONDENSATION, INSIDE OF REAR COMBINATION AND HEADLAMPS, IS TEMPORARY, AND WILL EVAPORATE WHEN TEMPERATURE RISES INSIDE LAMPS. MODEL ALL. NO YEARS LISTED. *PE

Bulletin Number: SB-11-123-12
SUBARU: RARE CONDITION WHERE ICE AND SNOW CLOGS EVAPORATIVE EMISSION SYSTEM HOSES AND/OR DRAIN SEPARATOR, DURING HEAVY SNOW CONDITIONS, REPAIR METHOD IS PROVIDED FOR REMOVAL OF DRAIN SEPARATOR AND INSTALLATION OF EVAPORATIVE HOSE KIT FOR PR

Bulletin Number: SB-11-123-12
SUBARU: RARE CONDITION WHERE ICE AND SNOW CLOGS EVAPORATIVE EMISSION SYSTEM HOSES AND/OR DRAIN SEPARATOR, DURING HEAVY SNOW CONDITIONS, REPAIR METHOD IS PROVIDED FOR REMOVAL OF DRAIN SEPARATOR AND INSTALLATION OF EVAPORATIVE HOSE KIT FOR PR

Bulletin Number: SB-11-123-12
SUBARU: RARE CONDITION WHERE ICE AND SNOW CLOGS EVAPORATIVE EMISSION SYSTEM HOSES AND/OR DRAIN SEPARATOR, DURING HEAVY SNOW CONDITIONS, REPAIR METHOD IS PROVIDED FOR REMOVAL OF DRAIN SEPARATOR AND INSTALLATION OF EVAPORATIVE HOSE KIT FOR PR

Bulletin Number: SB-141-13
SUBARU: THE RUBBER CAP, THAT COVERS ELECTRICAL CONNECTION AT OIL PRESSURE SWITCH, HAS A NEW DESIGN CHANGE AND IT PROVIDES BETTER SEALING AND RESISTANCE TO INTRUSION OF MOISTURE THAT CAN COMPROMISE ELECTRICAL CONNECTION, AND MAY BE IN SOME

Bulletin Number: SDCESTCENWST
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: SOA748V0200
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: SQTA
THE ALL-NEW 2014 SUBARU FORESTER WILL SOON BE ARRIVING IN GREATER NUMBERS AT YOUR DEALERSHIP. BEGINNING MONDAY MARCH 4, 2013 THROUGH MAY 2013, THERE WILL BE A SPECIAL QUALITY MONITORING TEAM HERE IN THE U.S. FROM FUJI HEAVY INDUSTRIES (FH

Bulletin Number: Subaru Tech Tips
Subaru Service and Technical Support Line Newletter.

Bulletin Number: TKA19-TKB19-TKC1
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propella

Bulletin Number: TKA19-TKB19-TKC1
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propella

Bulletin Number: TSB-05-57-14
SUBARU: A CHANGE HAS BEEN MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY. THE THICKNESS OF THE FLANGE AT THE BASE OF THE BOLT'S HEX HAS INCREASED TO 5MM. ALSO INCLUDED SUBARU STI/BRZ MODEL YEAR 2014.

Bulletin Number: TSB-09-55-13
SUBARU: THERE ARE CHANGES TO THE FUEL TAMK ASSEMBLY AND THE CUSHIONS FOUND ON THE FUEL DELIVERY TUBE. *JS

Bulletin Number: TSB-11-130-13R
SUBARU: SOME VEHICLES MAY EXPERIENCE DIFFICULTY STARTING, ROUGH IDLE, CAM POSITION OR MISFIRE DTCS. THIS BULLETIN CONTAINS THE INSPECTION AND REPAIR. *JS UPDATED 11/18/14. *PE

Bulletin Number: TSB-2-20-14
SUBARU: THE CUSTIOMER MAY COMPLAIN OF THE INTERMITTENT OPERATION OF THE HILL START ASSIST WARNING LAMP. STORED DTC C0076 WITH DETAIL CODES 2610H AND/OR 2620H. *JS

Bulletin Number: TSG-1
Tech Support SD Card for Navi Complete

Bulletin Number: WQA-37
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: WQF-42
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: WQH-44
SUBARU OF AMERICA, INC. HAS DETERMINED THAT A DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS ON CERTAIN 2014MY SUBARU FORESTER VEHICLES EQUIPPED WITH GENUINE SUBARU CARPETED FLOOR MATS. THE RESIN COMPOSITION USED FOR THE FLOOR MAT BA

Bulletin Number: WQH-44
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: WQH-44
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: WQH44
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: WQH-44F
CUSTOMER NAME _____________________________________________________________ VIN# ____________________________________________ DATE _____________________ I CERTIFY THAT: (CHECK ONE) ______ THE GENUINE SUBARU CARPETED FLOOR MATS RECEIVED

Bulletin Number: WQH-44F
CUSTOMER NAME _____________________________________________________________ VIN# ____________________________________________ DATE _____________________ I CERTIFY THAT: (CHECK ONE) ______ THE GENUINE SUBARU CARPETED FLOOR MATS RECEIVED

Bulletin Number: WQH-44M
WE HAVE RECEIVED SEVERAL CALLS FROM DEALERS WHO HAVE CUSTOMERS ELIGIBLE FOR THE WQH44 SUBARU CARPETED FLOOR MAT RECALL BUT DO NOT HAVE THE ORIGINAL MATS THAT WERE IN THE VEHICLE AT THE TIME OF SALE. IN MOST CASES, THE CUSTOMERS HAVE STATED

Bulletin Number: WQH44M
"PLEASE NOTE: ONLY THOSE VEHICLES THAT WERE RETAILED AT THE TIME OF THE APRIL 15, 2013 DEALER NOTICE CONCERNING 2014 MY FORESTER CARPETED FLOOR MATS ARE INCLUDED IN THE WQH44 RECALL CAMPAIGN. PLEASE REFER TO THE RECALL CAMPAIGN BULLETIN IN

Bulletin Number: WQH-44R
SUBARU OF AMERICA, INC. HAS DETERMINED THAT A DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS ON CERTAIN 2014MY SUBARU FORESTER VEHICLES EQUIPPED WITH GENUINE SUBARU CARPETED FLOOR MATS. THE RESIN COMPOSITION USED FOR THE FLOOR MAT BA

Bulletin Number: WQH-44R
SUBARU OF AMERICA, INC. HAS DETERMINED THAT A DEFECT, WHICH RELATES TO MOTOR VEHICLE SAFETY, EXISTS ON CERTAIN 2014MY SUBARU FORESTER VEHICLES EQUIPPED WITH GENUINE SUBARU CARPETED FLOOR MATS. THE RESIN COMPOSITION USED FOR THE FLOOR MAT BA

Bulletin Number: WQW58
Subaru of America, Inc. has initiated a Service Program to reprogram the Engine Control Module (ECM) on certain 2015 model year WRX vehicles and certain 2014 and 2015 model year 2.0XT Forester vehicles equipped with a 2.0 liter turbocharged

Bulletin Number: WQW58
Subaru of America, Inc. has initiated a Service Program to reprogram the Engine Control Module (ECM) on certain 2015 model year WRX vehicles and certain 2014 and 2015 model year 2.0XT Forester vehicles equipped with a 2.0 liter turbocharged

Bulletin Number: WQW-58R
2.0L DIT Models Only. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer

Bulletin Number: WQW-58R
Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving engine idle roughness or,

Bulletin Number: WQW-58R
SUBARU OF AMERICA, INC. HAS INITIATED A SERVICE PROGRAM TO REPROGRAM THE ENGINE CONTROL MODULE (ECM) ON CERTAIN 2015 MODEL YEAR WRX VEHICLES AND CERTAIN 2014 AND 2015 MODEL YEAR 2.0XT FORESTER VEHICLES EQUIPPED WITH A 2.0 LITER TURBOCHARGED

Bulletin Number: WQW-58R
2.0L DIT Models. Revised Recall Bulletin. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer

Bulletin Number: WQW-58R
2.0L DIT Models. Revised Recall Bulletin. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer

Bulletin Number: WQW-58R
2.0L DIT Models Only. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving

Bulletin Number: WQW-58R
2.0L DIT Models Only. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer concerns involving

Bulletin Number: WQW-58R
2.0L DIT Models Only. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. This bulletin includes the service procedure for diagnosis and repair of customer

Bulletin Number: WUE-90
Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

Bulletin Number: WUE-90R
Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

Bulletin Number: WUE-90R
Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.

Bulletin Number: WUE-90 tool
SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.

Bulletin Number: WUE-90 tool
SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.

Bulletin Number: WUE-90 tool
SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.

Bulletin Number: WUE-90 tool
SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.

Bulletin Number: WUF-91R
Subaru of America, Inc. (Subaru) is recalling certain vehicles in the ranges listed below to inspect and potentially replace the ignition switch. A total of 511 U.S. vehicles will be affected by this recall.

 
Recalls for 2014 Subaru Forester 2.5i Limited
2014 SUBARU FORESTER
NHTSA Campaign ID: 13V159000
Component: EQUIPMENT
Manufacturer: Subaru of America, Inc.
Manufacture Dates: 01/01/2013 - 03/31/2013
Potential Units Affected: 10137
Defect Description:
Subaru is recalling certain model year 2014 Forester vehicles manufactured from January 2013 through March 2013. The backing for the carpeted floor mats was not manufactured to specification. As a result, the floor mats may curl when exposed to heat.
Consequence:
Curling of the driver side floor mat could distract the driver and/or interfere with proper operation of one or a combination of, the vehicle's clutch, brake, and accelerator pedals. Brake or accelerator pedal interference may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash.
Action to take:
Subaru will notify owners, and dealers will replace each of the vehicle's four (4) carpeted floor mats with new ones. These services will be performed free of charge. Subaru issued an interim notification during April 2013. Notification that the remedy is now available was mailed to owners on June 5, 2013. Owners may contact Subaru at 1-800-782-2783. Subaru's recall campaign number is WQH-44.
2014 SUBARU FORESTER
NHTSA Campaign ID: 19V149000
Component: EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
Manufacturer: Subaru of America, Inc.
Manufacture Dates: 12/18/2012 - 04/28/2016
Potential Units Affected: 1303530
Defect Description:
Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.
Consequence:
Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.
Action to take:
Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUE-90.
 
Click to print
 News






Fuel Economy | Crash Results

Compar-A-Graphs:
4 Car Comparison | Rank-by-Specs
THE AUTO CHANNEL: Auto Channel Home | Auto News | Car Reviews | Media Library | Forums | Classifieds