USED CAR BUYER'S GUIDE

• Driver Airbag With Dual Stage Deployment
• Seat Mounted Front Side Airbags With Head Protection
• Passenger Airbag Cutoff Sensor Activated By Passenger Weight
• Passenger Airbag With Dual Stage Deployment
• Rear Automatic Locking Retractors
• Emergency Fuel Shut-Off Device
• Front Active Head Restraints
• L A T C H
• Front and Rear Crumple Zones
• Front and Rear Seatbelt Height Adjusters
• Rear Center 3-Point Seatbelt
• Front and Rear 3-Point Seatbelts
• Front Pretensioners With Force Limiters
• Side Guard Door Beams

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 02-104-08
INTAKE MANIFOLD MODIFICATION. *NJ

Bulletin Number: 02-162-15
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-162-15R
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-164-16
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability

Bulletin Number: 02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material whic

Bulletin Number: 02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material whi

Bulletin Number: 02-172-18R
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material whic

Bulletin Number: 03-68-12R
THIS BULLETIN REVIEWS A CHANGE TO THE PART NUMBERS USED FOR THE TRANSFER DRIVEN GEAR BEARINGS. THESE REVISED BEARINGS ARE TO BE USED TO ENHANCE DURABILITY.

Bulletin Number: 03-70-12
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS

Bulletin Number: 03-70-12R
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS - THIS BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A HIGH-PITCHED

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 03-82-18
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases

Bulletin Number: 04-13-09R
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within the

Bulletin Number: 04-13-09R
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018.

Bulletin Number: 04-13-09R
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018.

Bulletin Number: 04-13-09R
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE

Bulletin Number: 04-13-09R
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE

Bulletin Number: 04-13-09R
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within the

Bulletin Number: 06-68-19R
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o

Bulletin Number: 12-231-18
( 2017-2018MY Impreza - 5 Dr Only)

Bulletin Number: 14-22-16R
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Bulletin Number: 15-167-13R
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF A LOOSE WINDSHIELD MOUNTED AUTO-DIMMING COMPASS MIRROR WITH HOMELINK (WITH OR WITHOUT HOMELINK ON BRZ MODELS), THE MOUNTING ADAPTER PLATE SHOULD BE CHECKED FOR PROPER TIGHTNESS. THE APPLICABLE VEHICL

Bulletin Number: SB-05-50-10R
SUBARU: THERE IS A STEERING WHEEL VIBRATION AT HIGHWAY SPEEDS DUE TO AN IMPORPER WHEEL BALANCE. *RM

Bulletin Number: SB-WVL-22
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. FUEL TANK ONE WAY FUEL VALVE. CERTAIN MODELS REQUIRE PERMANENT REMOVAL OF THE ONE WAY FUEL VALVE LOCATED IN THE FUEL TANK. THE ONE WAY FUEL VALVE IS LOCATED AT THE BAS

Bulletin Number: SB-WVN-24
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ENGINE CONTROL MODULE (ECM) REPROGRAMMING AND FUEL TANK ONE WAY FUEL VALVE REMOVAL. AFFECTED VEHICLES HAVE TWO CONDITIONS THAT MAY ADVERSELY AFFECT THE PERFORMANCE OF T

Bulletin Number: SB-WVN-24
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ENGINE CONTROL MODULE (ECM) REPROGRAMMING AND FUEL TANK ONE WAY FUEL VALVE REMOVAL. AFFECTED VEHICLES HAVE TWO CONDITIONS THAT MAY ADVERSELY AFFECT THE PERFORMANCE OF T

Bulletin Number: SPB-WVU-31
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ECM REPROGRAMMING PROCEDURE. 2006-2010 LEGACY/OUTBACK/FORESTER/IMPREZA. *RM UPDATED 9/26/11. *PE

Bulletin Number: Subaru Tech Tips
Subaru Service and Technical Support Line Newletter.

Bulletin Number: WVN24R
REVISED. CA PZEV SPEC MODELS ONLY. Subaru of America, Inc. (SOA) has determined that vehicles affected by this Service Program have two conditions that may adversely affect the performance of the catalytic converter. To correct these con

Bulletin Number: WVN24R
REVISED. CA PZEV SPEC MODELS ONLY. Subaru of America, Inc. (SOA) has determined that vehicles affected by this Service Program have two conditions that may adversely affect the performance of the catalytic converter. To correct these con

Bulletin Number: WVU31R
2.5 Liter N/A engine only. REVISED. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. A modification to the Engine Control Module software logic has been developed to impr

Bulletin Number: WVU31R
2.5 Liter N/A engine only. REVISED. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. A modification to the Engine Control Module software logic has been developed to impr