THE AUTO CHANNEL:   TACH Home | Auto News | Reviews | Media | Forums | Classifieds

USED CAR BUYER'S GUIDE


Fuel Economy | Crash Results | Recalls | Service Bulletins | Site Map

SUV    Sedan    Truck    Van    Convertible   Coupe    Wagon   Luxury    Hybrid      CUV
Compar-A-Graphs:    Rank-By-Specs    or  4-Car Comparison
Click to print
Compare Cars Side by Side on
Safety Features



2016 Bentley Continental GT 2dr Cpe Speed

  • Electronic Stability Control (ESC)
  • ABS And Driveline Traction Control
  • Side Impact Beams
  • Dual Stage Driver And Passenger Seat-Mounted Side Airbags
  • Front And Rear Parking Sensors
  • Tire Specific Low Tire Pressure Warning
  • Dual Stage Driver And Passenger Front Airbags
  • Curtain 1st And 2nd Row Airbags
  • Airbag Occupancy Sensor
  • Driver Knee Airbag
  • Outboard Front Lap And Shoulder Safety Belts -inc: Height Adjusters and Pretensioners
  • Knee Air Bag
  • Driver Air Bag
  • Passenger Air Bag Sensor
  • Passenger Air Bag
  • Front Head Air Bag
  • Front Side Air Bag
  • Rear Head Air Bag
  • Daytime Running Lights
  • Traction Control
  • Headlights-Auto-Leveling
  • Brake Assist
  • Stability Control
  • Integrated Turn Signal Mirrors
 
Crash Test Results for the 2016 Bentley Models:
No crash test results exist
 
Service Bulletins for 2016 Bentley Continental GT 2dr Cpe Speed
2016 BENTLEY CONTINENTAL GT:

Bulletin Number: 20307654
2012 MY onwards Continental family and Flying Spur - Infotainment unit (RNS) ? Replacement Process

Bulletin Number: 2039769/2
LEFT - MULTI FUNCTION STEERING WHEEL SWITCH (E440) DTC *REVISED*

Bulletin Number: 20408332
Boot lid parameter change - software update (SC15/10) *Revised: VIN Updates

Bulletin Number: 20424622
HEADLINER REPLACEMENT - RIGHT HAND C POST HEADLINER GUIDE

Bulletin Number: 2043057/2
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED *REVISED*

Bulletin Number: 20430573
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED

Bulletin Number: 20430573
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED

Bulletin Number: 20430801
LOWER REARWARD LEVERS ROW

Bulletin Number: 20434061
HOOD REAR BOW CLASH TO TONNEAU COVER PREVENTION (SC16/21)

Bulletin Number: 2044286/1
NEW CONTINENTAL SERIES & FLYING SPUR - DAMPER KNOCK

Bulletin Number: 2044673/1
NEW GT BOOT LID MOTOR INFORMATION REQUIRED

Bulletin Number: 20450801
ALL NEW CONTINENTAL GT AND ALL NEW CONTINENTAL GTC STEERING SHIMMY/VIBRATION ROW

Bulletin Number: 20460611
Door profile incorrect

Bulletin Number: 20462301
Blaupunkt premium amplifier software update (ASW 09.07) (SC/40)

Bulletin Number: 20473351
Convertible hood header latch fault

Bulletin Number: 20473351
Convertible hood header latch fault

Bulletin Number: 2050542.1
Service info: body/equipment: front exterior lighting steamed up/leaks

Bulletin Number: 2051187.1
Poor Engine Running Complaints (Misfires) Petrol Engines Only

Bulletin Number: 2051187.3
Poor Engine Running Complaints (Misfires) Petrol Engines Only

Bulletin Number: 2051562.1
12 Volt - Battery condition checks

Bulletin Number: 2051562.4
12 Volt - Battery condition checks

Bulletin Number: 2052785-1
Brake noise identification

Bulletin Number: 2052785.3
Brake noise identification

Bulletin Number: 2053177.3
All Vehicle Variants - Spurious DTC List

Bulletin Number: 2053177.3
All Vehicle Variants - Spurious DTC List


2016 BENTLEY CONTINENTAL GTC:

Bulletin Number: 20307654
2012 MY onwards Continental family and Flying Spur - Infotainment unit (RNS) ? Replacement Process

Bulletin Number: 2039769/2
LEFT - MULTI FUNCTION STEERING WHEEL SWITCH (E440) DTC *REVISED*

Bulletin Number: 20424622
HEADLINER REPLACEMENT - RIGHT HAND C POST HEADLINER GUIDE

Bulletin Number: 2043057/2
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED *REVISED*

Bulletin Number: 20430573
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED

Bulletin Number: 20430573
ACC SENSOR ALIGNMENT - INFORMATION REQUIRED

Bulletin Number: 20430801
LOWER REARWARD LEVERS ROW

Bulletin Number: 20434061
HOOD REAR BOW CLASH TO TONNEAU COVER PREVENTION (SC16/21)

Bulletin Number: 20434062
Hood rear bow clash to tonneau cover - prevention (SC16/21) *Revised: VIN Updates

Bulletin Number: 20434062
Hood rear bow clash to tonneau cover - prevention (SC16/21) *Revised: VIN Updates

Bulletin Number: 2044286/1
NEW CONTINENTAL SERIES & FLYING SPUR - DAMPER KNOCK

Bulletin Number: 20450801
ALL NEW CONTINENTAL GT AND ALL NEW CONTINENTAL GTC STEERING SHIMMY/VIBRATION ROW

Bulletin Number: 20460611
Door profile incorrect

Bulletin Number: 20462301
Blaupunkt premium amplifier software update (ASW 09.07) (SC/40)

Bulletin Number: 2050542.1
Service info: body/equipment: front exterior lighting steamed up/leaks

Bulletin Number: 2051187.1
Poor Engine Running Complaints (Misfires) Petrol Engines Only

Bulletin Number: 2051187.3
Poor Engine Running Complaints (Misfires) Petrol Engines Only

Bulletin Number: 2051562.1
12 Volt - Battery condition checks

Bulletin Number: 2051562.4
12 Volt - Battery condition checks

Bulletin Number: 2052785.3
Brake noise identification

Bulletin Number: 2053177.3
All Vehicle Variants - Spurious DTC List

Bulletin Number: 2053177.3
All Vehicle Variants - Spurious DTC List

 
Recalls for 2016 Bentley Continental GT 2dr Cpe Speed
No recalls exist.
 


2016 Subaru BRZ 2dr Cpe Man Limited

  • Electronic Stability Control (ESC)
  • ABS And Driveline Traction Control
  • Side Impact Beams
  • Dual Stage Driver And Passenger Seat-Mounted Side Airbags
  • Low Tire Pressure Warning
  • Dual Stage Driver And Passenger Front Airbags
  • Curtain 1st And 2nd Row Airbags
  • Airbag Occupancy Sensor
  • Outboard Front Lap And Shoulder Safety Belts -inc: Pretensioners
  • Back-Up Camera
  • Passenger Air Bag Sensor
  • Driver Air Bag
  • Passenger Air Bag
  • Front Side Air Bag
  • Rear Head Air Bag
  • Front Head Air Bag
  • Headlights-Auto-Leveling
  • Daytime Running Lights
  • Traction Control
  • Brake Assist
  • Stability Control
 
Crash Test Results for the 2016 Subaru Models:
No crash test results exist
 
Service Bulletins for 2016 Subaru BRZ 2dr Cpe Man Limited
2016 SUBARU BRZ:

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin iden

Bulletin Number: 01-168-09R
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.

Bulletin Number: 01-177-16
This Service Information bulletin provides notice of an additional step to follow when diagnosing DTC P219A- ?Air-Fuel Ratio Imbalance (Bank 1)?.

Bulletin Number: 01-177-16
This Service Information bulletin provides notice of an additional step to follow when diagnosing DTC P219A- ?Air-Fuel Ratio Imbalance (Bank 1)?.

Bulletin Number: 02-133-12R
The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.

Bulletin Number: 02-133-12R
The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.

Bulletin Number: 02-162-15
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-162-15R
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH C

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-163-16R
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with t

Bulletin Number: 02-164-16
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability

Bulletin Number: 02-166-17
This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis

Bulletin Number: 02-166-17R
This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become dis

Bulletin Number: 02-170-17
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness co

Bulletin Number: 02-170-17R
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn

Bulletin Number: 02-170-17R
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness conn

Bulletin Number: 02-178-18R
This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.

Bulletin Number: 03-80-18
This Service Information bulletin announces a change to the flywheel (pilot) bearing to a ?environmentally friendly? type which is compliant with the REACH (Registration, Evaluation, Authorization and restriction of CHemicals) guidelines

Bulletin Number: 05-61-16
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.

Bulletin Number: 05-65-18
This bulletin announces a change made to the front lower control arm ball joint boots. The boot material has been changed to provide increased resistance to damage from ozone.

Bulletin Number: 06-68-19
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o

Bulletin Number: 06-68-19
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o

Bulletin Number: 06-68-19R
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven o

Bulletin Number: 07-109-16
This bulletin provides a procedure to address a hard starting condition which may occur on vehicles repeatedly driven for short distances. For example: This condition could arise while the vehicle is in inventory for an extended period of t

Bulletin Number: 07-109-16
This bulletin provides a procedure to address a hard starting condition which may occur on vehicles repeatedly driven for short distances. For example: This condition could arise while the vehicle is in inventory for an extended period of t

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system

Bulletin Number: 07-128-18R
This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s

Bulletin Number: 07-133-18
This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock senso

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched "chirp", "squeak" or "cricket" sound heard coming from the engine's Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-54-12R
This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. So

Bulletin Number: 09-69-19
This bulletin provides an additional service procedure for replacing the pulsation dampers located on both low-pressure fuel delivery pipes as shown in the illustration below. Although the BRZ Service Manual does not currently show the damp

Bulletin Number: 09-69-19
This bulletin provides an additional service procedure for replacing the pulsation dampers located on both low-pressure fuel delivery pipes as shown in the illustration below. Although the BRZ Service Manual does not currently show the damp

Bulletin Number: 12-190-15R
THIS BULLETIN PROVIDES A PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A CREAKING SOUND HEARD WHEN OPERATING THE CLUTCH PEDAL. THE CAUSE OF THE SOUND HAS BEEN IDENTIFIED AS A VERY SLIGHT AMOUNT OF MOVEMENT BETWEEN THE 2 LAYERS OF METAL (CIRCLED

Bulletin Number: 12-190-15R
THIS BULLETIN PROVIDES A PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A CREAKING SOUND HEARD WHEN OPERATING THE CLUTCH PEDAL. THE CAUSE OF THE SOUND HAS BEEN IDENTIFIED AS A VERY SLIGHT AMOUNT OF MOVEMENT BETWEEN THE 2 LAYERS OF METAL (CIRCLED

Bulletin Number: 12-231-18
( 2017-2018MY Impreza - 5 Dr Only)

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-231-18R
This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with

Bulletin Number: 12-250-18
This bulletin announces a design change made to the rear bumper cover (face). To insure a proper fit of the new cover, the rear edge portion of the existing inner mud guards (splash shields) will need to be modified slightly in specific are

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-251-18
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There

Bulletin Number: 12-267-19
This bulletin announces availability of a new retaining plate and installation method to address gapping conditions which may develop between the front bumper cover and fender.

Bulletin Number: 12-271-19
This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. Thi

Bulletin Number: 14-22-16R
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.

Bulletin Number: 15-177-14M
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. T

Bulletin Number: 15-177-14M2
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi

Bulletin Number: 15-177-14M2
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi

Bulletin Number: 15-177-14M2
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. To assist with that, a new Bluetooth Interview Form is available to facilitate the completi

Bulletin Number: 15-177-14R
All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when

Bulletin Number: 15-177-14R
All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when

Bulletin Number: 15-177-14R
This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.

Bulletin Number: 15-177-14R
Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when operating

Bulletin Number: 15-177-14R
This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems.

Bulletin Number: 15-190-15R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.Within the terms of the Basic New Car Warranty and the one year Replacement Parts Warranty the Exch

Bulletin Number: 15-190-15R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie

Bulletin Number: 15-190-15R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie

Bulletin Number: 15-190-15R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policie

Bulletin Number: 15-190-15R
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Polic

Bulletin Number: 15-197-16
Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m

Bulletin Number: 15-197-16
Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. In the event a ?Check SD Memory Card? alert m

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display.

Bulletin Number: 15-199-16R
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display

Bulletin Number: 15-244-19
This bulletin announces availability of individual service parts and provides an installation procedure for the A/C compressor clutch assembly. Previously, a complete compressor assembly was necessary if any of the clutch components require

Bulletin Number: 15-244-19
This bulletin announces availability of individual service parts and provides an installation procedure for the A/C compressor clutch assembly. Previously, a complete compressor assembly was necessary if any of the clutch components require

Bulletin Number: 16-96-15
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR OPTIMIZING THE TRANSMISSION CONTROL MODULE (TCM) ON ALL 2015 AND SOME EARLY-PRODUCTION 2016MY VEHICLES TO CONTROL AN ENGINE IDLE SPEED FLUCTUATION CONDITION WHEN IN PARK OR NEU

Bulletin Number: 16-96-15
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES FOR OPTIMIZING THE TRANSMISSION CONTROL MODULE (TCM) ON ALL 2015 AND SOME EARLY-PRODUCTION 2016MY VEHICLES TO CONTROL AN ENGINE IDLE SPEED FLUCTUATION CONDITION WHEN IN PARK OR NEU

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 17-17-13R
This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 17-17-13R
This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.

Bulletin Number: 17-17-13R
NOTE: The Airbag systems used on previous and current WRX, STI and Tribeca models are NOT equipped with EDR functionality. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated i

Bulletin Number: 18-182-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: 18-182-15
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. THE TABLES CONTAINED WITHIN THIS BULLETIN ARE TO BE USED AS GUIDES FOR BEC

Bulletin Number: SST
"SPECIAL SERVICE TOOL SHIPMENT: BRZ WINDOW GLASS WRENCH STARTING THE WEEK OF AUGUST 24, 2015, SUBARU RETAILERS WILL RECEIVE A SPECIAL SERVICE TOOL FOR THE BRZ. THE TOOL IS BEING SENT AS ESSENTIAL AND IS USED WHEN SERVICING THE BRZ WINDOW R

Bulletin Number: Subaru Tech Tips
Subaru Service and Technical Support Line Newletter.

 
Recalls for 2016 Subaru BRZ 2dr Cpe Man Limited
No recalls exist.
 






Fuel Economy | Crash Results

Compar-A-Graphs:
4 Car Comparison | Rank-by-Specs
THE AUTO CHANNEL: Auto Channel Home | Auto News | Car Reviews | Media Library | Forums | Classifieds