THE AUTO CHANNEL:   TACH Home | Auto News | Reviews | Media | Forums | Classifieds

USED CAR BUYER'S GUIDE


Fuel Economy | Crash Results | Recalls | Service Bulletins | Site Map

SUV    Sedan    Truck    Van    Convertible   Coupe    Wagon   Luxury    Hybrid      CUV
Compar-A-Graphs:    Rank-By-Specs    or  4-Car Comparison
Click to print
Compare Cars Side by Side on
Safety Features



2014 Cadillac CTS Sedan 2.0L Turbo Standard AWD

  • Driver Airbag
  • Seat Mounted Front Side Airbags
  • Front Dual Knee Airbags
  • Passenger Airbag Cutoff Sensor
  • Passenger Airbag
  • Front and Rear Side Head Curtain Airbags
  • Ultrasonic Rear Electronic Parking Aid With Ultrasonic Sensors
  • Front Active Head Restraints
  • Crash Sensor Sends GPS Signal
  • Front Seatbelt Height Adjusters
  • Rear Center 3-Point Seatbelts
  • Front Pretensioners
  • Side Guard Door Beams
 
Crash Test Results for the 2014 Cadillac Models:
No crash test results exist
 
Service Bulletins for 2014 Cadillac CTS Sedan 2.0L Turbo Standard AWD
No service bulletins exist
 
Recalls for 2014 Cadillac CTS Sedan 2.0L Turbo Standard AWD
No recalls exist.
 


2018 Genesis G80 3.8L AWD

  • Electronic Stability Control (ESC)
  • ABS And Driveline Traction Control
  • Side Impact Beams
  • Dual Stage Driver And Passenger Seat-Mounted Side Airbags
  • Blind Spot Detection Blind Spot Sensor
  • Forward Collision and Rear Cross Traffic Alert Rear Collision
  • Lane Keep Assist Lane Keeping Assist
  • Lane Keep Assist Lane Departure Warning
  • Tire Specific Low Tire Pressure Warning
  • Dual Stage Driver And Passenger Front Airbags
  • Curtain 1st And 2nd Row Airbags
  • Airbag Occupancy Sensor
  • Driver Knee Airbag and Rear Side-Impact Airbag
  • Restricted Driving Mode
  • Rear Child Safety Locks
  • Outboard Front Lap And Shoulder Safety Belts -inc: Rear Center 3 Point, Height Adjusters and Pretensioners
  • Back-Up Camera
  • Knee Air Bag
  • Driver Air Bag
  • Passenger Air Bag
  • Passenger Air Bag Sensor
  • Rear Head Air Bag
  • Front Side Air Bag
  • Front Head Air Bag
  • Rear Side Air Bag
  • Lane Departure Warning
  • Traction Control
  • Stability Control
  • Brake Assist
  • Lane Keeping Assist
  • Cross-Traffic Alert
  • Daytime Running Lights
  • Headlights-Auto-Leveling
  • Blind Spot Monitor
  • Integrated Turn Signal Mirrors
  • Child Safety Locks
 
Crash Test Results for the 2018 Genesis Models:
No crash test results exist
 
Service Bulletins for 2018 Genesis G80 3.8L AWD
2018 GENESIS G80:

Bulletin Number: 19-AT-001HG
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module.

Bulletin Number: 19-AT-001HG
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module.

Bulletin Number: 19-AT-002HG
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.

Bulletin Number: 19-AT-002HG
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.

Bulletin Number: 19-AT-004HG
This bulletin provides the procedure to replace the O-ring to the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe.

Bulletin Number: 19-AT-004HG
This bulletin provides the procedure to replace the O-ring to the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe.

Bulletin Number: 19-AT-007HG
This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality.

Bulletin Number: 19-AT-007HG
This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality.

Bulletin Number: 19-AT-011HG
The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles.

Bulletin Number: 19-AT-011HG
The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles.

Bulletin Number: 19-AT-012HG
This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).

Bulletin Number: 19-AT-014HG
This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.

Bulletin Number: 19-BD-001HG
This bulletin provides the procedure to repair the panoramic sunroof creaking noise originating from the panoramic moving glass assembly.

Bulletin Number: 19-BD-002HG
This procedure describes how to clean chrome surfaces when stains are present. Some stains may occur from hard water used during car wash. Moldings should not be replaced if stains are present. Follow the procedures below to remove stains f

Bulletin Number: 19-BD-002HG
This procedure describes how to clean chrome surfaces when stains are present. Some stains may occur from hard water used during car wash. Moldings should not be replaced if stains are present. Follow the procedures below to remove stains f

Bulletin Number: 19-BE-003H
Some vehicles equipped with the wireless charging pad may experience a no charging condition. This bulletin provides information of how to diagnose the no charging condition.

Bulletin Number: 19-BE-007HG
This bulletin provides information for the following: General key FOB information including smart key and card key. How to program smart key FOB and card key. How to program additional key FOB when applicable.

Bulletin Number: 19-BE-007HG
This bulletin provides information for the following: General key FOB information including smart key and card key. How to program smart key FOB and card key. How to program additional key FOB when applicable.

Bulletin Number: 19-EE-004HG-1
This bulletin aids with the general battery maintenance procedure TSB 19-EE-006H, but only applies to vehicles equipped with Blue Link SOC reporting ability.

Bulletin Number: 19-EE-006HG
This bulletin provides information on performing battery maintenance for PDI and In-Stock vehicle inventory.

Bulletin Number: 19-EE-006HG
This bulletin provides information on performing battery maintenance for PDI and In-Stock vehicle inventory.

Bulletin Number: 19-FL-003HG
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot b

Bulletin Number: 19-FL-003HG
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot b

Bulletin Number: 19-FL-003HG
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot b

Bulletin Number: 5NP-B8S4T-12
Genesis is conducting Service Campaign T04G to update the navigation system software on certain dealer stock 2018 Model Year G80 vehicles. Service Campaign T04G provides a service procedure to update the navigation system.

Bulletin Number: 5NP-B8S4T-12
Genesis is conducting Service Campaign T04G to update the navigation system software on certain dealer stock 2018 Model Year G80 vehicles. Service Campaign T04G provides a service procedure to update the navigation system.

Bulletin Number: 5NP-C6D6H-02
Some Genesis G80 vehicles may experience a haptic steering warning light with DTC Code B247100 ? Vibration Motor Fault code set. This bulletin provides service information and the procedure to replace the haptic controller.

Bulletin Number: 5NP-F6A3H-12
The bulletin describes the procedure to update the software in the G80 navigation system to help improve Bluetooth, Voice Recognition, and Navigation performance. The software update will take approximately 25 minutes to complete.

Bulletin Number: 5NP-M6U4U-02
Genesis is re-launching Service Campaign T03G to inspect the condition of the front brakes on certain dealer stock 2018 Genesis G80 vehicles. Service Campaign T03G provides a service procedure to check and maintain the condition of the fron

Bulletin Number: 5NP-N2N8D-01
When servicing a vehicle with a "Check Engine light" and any of the DTCs listed below, follow the Service Procedure and replace the E-module.

Bulletin Number: 5NP-N4H5U-12
When servicing a vehicle with a "Check Engine light" or any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module or park position switch.

Bulletin Number: 5NP-N9C6T-12
Hyundai Motor America is conducting Service Campaign to inspect the condition of the front brakes on certain dealer stock 2018 Genesis G80 vehicles. Service Campaign T03G provides a service procedure to check and maintain the condition of t

Bulletin Number: 5NP-R3F5T-03
This TSB provides information on the headlight pattern changes on certain 2018 MY Genesis G80, Genesis G80 Sport, and Genesis G90 with LED Headlights.

Bulletin Number: 5NP-R6K6G-01
This bulletin describes the procedure to variant code the Genesis G80 (DH) premium navigation system. If the variant coding procedure is not performed after the navigation unit is replaced and the vehicle is in the reverse gear, a black/bla

Bulletin Number: 5NP-S9H5J-01
When servicing a vehicle with a "Check Engine light" with any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module or park position switch.

Bulletin Number: 5NP-T5Y7X-02
When servicing a vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure and replace the E-module.

Bulletin Number: 5NP-Y3G8R-01
This TSB provides information about the parking assist systems (PAS).

Bulletin Number: 5NP-Y5K9G-12
This bulletin describes the procedure to variant code the Genesis G80 (DH) navigation system. A black/blank screen or black and white image may be displayed from the rear view camera after the navigation unit is replaced without performing

Bulletin Number: 5NP-Z3J5R-01
This bulletin provides the procedure to replace the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe.

Bulletin Number: 5NP-Z9P3Z-01
This bulletin describes the procedure to replace the front seat cushion tilt pipe housing. If wobble and/or noise occurs from the front seat track assembly it is recommended to replace the front seat cushion tilt pipe housings with new ones

 
Recalls for 2018 Genesis G80 3.8L AWD
2018 GENESIS G80
NHTSA Campaign ID: 19V538000
Component: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO-CHARGER
Manufacturer: Hyundai Motor America
Manufacture Dates: 01/16/2017 - 12/29/2017
Potential Units Affected: 8059
Defect Description:
Hyundai Motor America (Hyundai) is recalling certain 2018 Genesis G80 and 2017-2018 Genesis G90 vehicles equipped with 3.3 liter turbocharged engines. The turbocharger oil supply pipe may have a loose seal, causing oil to leak onto the exhaust manifold.
Consequence:
Oil leaking onto the exhaust manifold increases the risk of a fire.
Action to take:
Hyundai will notify owners, and dealers will replace the turbocharger oil supply pipe, free of charge. The recall is expected to begin September 6, 2019. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 003G.
2018 GENESIS G80
NHTSA Campaign ID: 19V538000
Component: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
Manufacturer: Hyundai Motor America
Manufacture Dates: 01/16/2017 - 12/29/2017
Potential Units Affected: 8059
Defect Description:
Hyundai Motor America (Hyundai) is recalling certain 2018 Genesis G80 and 2017-2018 Genesis G90 vehicles equipped with 3.3 liter turbocharged engines. The turbocharger oil supply pipe may have a loose seal, causing oil to leak onto the exhaust manifold.
Consequence:
Oil leaking onto the exhaust manifold increases the risk of a fire.
Action to take:
Hyundai will notify owners, and dealers will replace the turbocharger oil supply pipe, free of charge. The recall is expected to begin September 6, 2019. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 003G.
2018 GENESIS G80
NHTSA Campaign ID: 18V496000
Component: AIR BAGS: OCCUPANT CLASSIFICATION SYSTEM - OCS (FRONT PASSENGER)
Manufacturer: Hyundai Motor America
Manufacture Dates: 01/18/2017 - 06/05/2018
Potential Units Affected: 3305
Defect Description:
Hyundai Motor America (Hyundai) is recalling certain 2018 Genesis G80 vehicles. The Occupant Classification System (OCS) may incorrectly detect that an adult is in the passenger seat, even if the seat is unoccupied. In the event of a crash, if a child or infant is in the seat, the front passenger air bag may deploy instead of being deactivated.
Consequence:
In the event of a crash, if the front passenger air bag deploys instead of being deactivated when a child or infant are in the front passenger seat, it can increase the risk of injury.
Action to take:
Hyundai will notify owners, and dealers will reprogram the OCS, free of charge. The recall began August 24, 2018. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 002G.
2018 GENESIS G80
NHTSA Campaign ID: 18V305000
Component: VISIBILITY:WINDSHIELD
Manufacturer: Hyundai Motor America
Manufacture Dates: 02/14/2018 - 02/21/2018
Potential Units Affected: 37
Defect Description:
Hyundai Motor America (Hyundai) is recalling certain 2018 Hyundai Genesis G80 and Genesis G90 vehicles. The windshield and rear window on these vehicles may have been installed with incorrect primer, potentially reducing the glass bonding strength.
Consequence:
If the glass bonding strength is reduced over time, the windshield and rear window may detach while driving, increasing the risk of a crash.
Action to take:
Hyundai will notify owners, and dealers will replace the front and rear glass, free of charge. The recall began on July 6, 2018. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 001G.
2018 GENESIS G80
NHTSA Campaign ID: 18V305000
Component: VISIBILITY:GLASS, SIDE/REAR
Manufacturer: Hyundai Motor America
Manufacture Dates: 02/14/2018 - 02/21/2018
Potential Units Affected: 37
Defect Description:
Hyundai Motor America (Hyundai) is recalling certain 2018 Hyundai Genesis G80 and Genesis G90 vehicles. The windshield and rear window on these vehicles may have been installed with incorrect primer, potentially reducing the glass bonding strength.
Consequence:
If the glass bonding strength is reduced over time, the windshield and rear window may detach while driving, increasing the risk of a crash.
Action to take:
Hyundai will notify owners, and dealers will replace the front and rear glass, free of charge. The recall began on July 6, 2018. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 001G.
 






Fuel Economy | Crash Results

Compar-A-Graphs:
4 Car Comparison | Rank-by-Specs
THE AUTO CHANNEL: Auto Channel Home | Auto News | Car Reviews | Media Library | Forums | Classifieds