THE AUTO CHANNEL:   TACH Home | Auto News | Reviews | Media | Forums | Classifieds

USED CAR BUYER'S GUIDE


Fuel Economy | Crash Results | Recalls | Service Bulletins | Site Map

SUV    Sedan    Truck    Van    Convertible   Coupe    Wagon   Luxury    Hybrid      CUV
Compar-A-Graphs:    Rank-By-Specs    or  4-Car Comparison
Click to print
Compare Cars Side by Side on
Safety Features



2008 Toyota Corolla S 5-Spd MT

  • Driver Airbag With Dual Stage Deployment
  • Passenger Airbag Cutoff Sensor
  • Passenger Airbag With Dual Stage Deployment
  • Front and Rear Automatic Locking Retractors
  • Emergency Fuel Shutoff Device
  • L A T C H
  • Front and Rear Crumple Zones
  • Front Seatbelt Height Adjusters
  • Rear 3-Point Center Seatbelt
  • Front and Rear 3-Point Seatbelts
  • Front Pretensioners With Force Limiters
  • Side Guard Door Beams
  • Trunk Anti-Trap Device
 
Crash Test Results for the 2008 Toyota Models:
Car Frontal Star Rating Side Star Rating Rollover
Resistance
Rating
Driver Pass. Front Seat Rear Seat
2008 Toyota 4Runner 44553
2008 Toyota Avalon 55554
2008 Toyota Camry 55554
2008 Toyota Camry Hybrid 55554
2008 Toyota Corolla 55444
2008 Toyota FJ Cruiser 54553
2008 Toyota Highlander 54554
2008 Toyota Highlander Hybrid 5455Not Tested
2008 Toyota Landcruiser Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2008 Toyota Matrix 54344
2008 Toyota Matrix 54544
2008 Toyota Prius 44544
2008 Toyota RAV4 54554
2008 Toyota Scion tC 54554
2008 Toyota Scion xB 44554
2008 Toyota Scion xD 44554
2008 Toyota Sequoia 54Not
Tested
Not
Tested
4
2008 Toyota Sienna 45554
2008 Toyota Solara Not
Tested
Not
Tested
Not
Tested
Not
Tested
4
2008 Toyota Solara 55554
2008 Toyota Tacoma 555Not
Tested
4
2008 Toyota Tacoma 555Not
Tested
4
2008 Toyota Tacoma 55554
2008 Toyota Tundra 44Not
Tested
Not
Tested
3
2008 Toyota Tundra 44Not
Tested
Not
Tested
3
2008 Toyota Tundra 44Not
Tested
Not
Tested
3
2008 Toyota Yaris 44334
2008 Toyota Yaris Liftback 54334
 
Service Bulletins for 2008 Toyota Yaris Liftback S 5-Spd MT
2008 TOYOTA COROLLA:

Bulletin Number: 00207
TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. *KB

Bulletin Number: 03307
TIRE PRESSURE WARNING VALVE/SENSOR ACTIVATION & INITIALIZATION. *KB

Bulletin Number: 04507
M.I.L. (ON) DTC P0171, P030# AND/OR P0133 ENGINE RUNNING LEAN IN SUBFREEZING AMBIENT TEMPERATURES. *NJ

Bulletin Number: 07013
SPECIAL SERVICE CAMPAIGN - SSC 70E OWNER'S WARRANTY INFORMATION LETTER. *NJ

Bulletin Number: 13707
FLOOR MAT INSTALLATION DURING (PDS) PRE-DELIVERY SERVICE. *NJ

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: SET-TSB-15-005
Discusses Southeast Toyota Accessory Keyless Entry system General trouble shooting and revised control module identification.

Bulletin Number: SST Requirements
SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.

Bulletin Number: TC-10-048
TOYOTA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. REPLACE THE ENGINE ACCESSORY BELT ON CERTAIN MODEL YEAR COROLLA VEHICLES EQUIPPED WITH A 2ZR-FE ENGINE. THE ENGINE ACCESSORY BELT MAY HAVE BEEN IMPROPERLY MANUFACTURED.

Bulletin Number: TC13-019
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-PG006-00 Obsol
This bulletin is now obsolete. Please see T-SB-0054-13.

Bulletin Number: T-SB-0012-13
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0012-13 Rev
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bullet

Bulletin Number: T-SB-0012-13 Rev
TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16.

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-0018-08
ABS LIGHT AND/OR CRUISE LIGHT FLASHING AND A/C INOPERATIVE. *NJ

Bulletin Number: T-SB-0040-08
TSB: On some vehicles, when Rapgard is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. T

Bulletin Number: T-SB-0040-08
TSB: On some vehicles, when Rapgard is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. T

Bulletin Number: T-SB-0043-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: TSB-0047-09
TOYOTA: MULTIPLE WARNING LIGHTS ILLUMINATED, VEHICLE NOT SHIFTING FROM PARK TO DRIVE, AND OTHER ACCESSORIES BECOMING INOPERATIVE AFTER VEHICLE HAS COLD SOAKED IN SUBFREEZING AMBIENT AIR TEMPERATURES. *PE UPDAT

Bulletin Number: T-SB-0054-13
California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guide

Bulletin Number: T-SB-0057-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obso

Bulletin Number: TSB-0064-10
TOYOTA: TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DE

Bulletin Number: T-SB-0064-10 Rev
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0064-10 Rev
This bulletin is now obsolete. Please see T-SB-0012-13.

Bulletin Number: T-SB-0071-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when

Bulletin Number: T-SB-0083-13 Rev
TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Bulletin Number: T-SB-0083-13 Rev
TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Bulletin Number: TSB-0087-12
TOYOTA: ACCELERATOR PEDAL SENSOR ASSEMBLY INFORMATION REGARDING THE INSPECTION, REMOVAL, AND INSTALLATION, IF LUBRICATION OR OIL, IS APPLIED. *PE

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: TSB-0122-11
TOYOTA: INFORMATION PROVIDED FOR REPLACING THE SEAT COVERS FOR VEHICLES EQUIPPED WITH SIDE AIRBAGS. *PE

Bulletin Number: TSB-0122-11
TOYOTA: INFORMATION PROVIDED FOR REPLACING THE SEAT COVERS FOR VEHICLES EQUIPPED WITH SIDE AIRBAGS. *PE

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16_Rev
TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0142-13
Some 2004 ? 2014 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to

Bulletin Number: T-SB-0142-13 Rev
TSB: Some 2004 - 2015 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bullet

Bulletin Number: T-SB-0142-13 Rev
TSB: Some 2004 - 2015 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bullet

Bulletin Number: T-SB-0142-13 Rev
TSB: REVISION NOTICE November 10, 2016 Rev2: ? Applicability has been updated to include 2016 ? 2017 model year Toyota vehicles. ? Parts Information section has been updated. Some 2004 ? 2017 model year Toyota vehicles may exhibit odor

Bulletin Number: T-SB-0144-08_Obs
TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: T-SB-0150-13
Some 2003 ? 2008 model year Corolla and Matrix vehicles installed with TCMC (Toyota Complete Maintenance Care) front brake pads may exhibit a groan or squeak noise in various driving conditions. Improved brake pads have been made available

Bulletin Number: T-SB-0150-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0150-13
Some 2003 ? 2008 model year Corolla and Matrix vehicles installed with TCMC (Toyota Complete Maintenance Care) front brake pads may exhibit a groan or squeak noise in various driving conditions. Improved brake pads have been made available

Bulletin Number: T-SB-0150-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0150-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: TSB018217
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed

Bulletin Number: T-SB-0185-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.

Bulletin Number: T-SB-0187-12
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0187-12
Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to se

Bulletin Number: T-SB-0187-12 Rev
Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to se

Bulletin Number: T-SB-0187-12_Rev
TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous print

Bulletin Number: T-SB-0187-12_Rev
TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous print

Bulletin Number: T-SB-0200-08 Rev
TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 - 2014 model year automatic transmissions.

Bulletin Number: T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deplo

Bulletin Number: T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deplo

Bulletin Number: T-SB-0229-12_Rev
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerg

Bulletin Number: T-SB-0235-09
TOYOTA: ENGINE CONTROL. SOME MODEL VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0456. EVAPORATIVE EMISSION CONTROL SYSTEM LEAK DETECTED (VERY SMALL LEAK). THE ENGINE CONTROL MODULE/ECM (SAE TERM: POWERTRAI

Bulletin Number: T-SB-0260-08 Rev
TSB: The purpose of this bulletin is to assist in the identification and location of serial numbers on 2006 -2014 model year remanufactured automatic transmissions.

Bulletin Number: T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria lis

Bulletin Number: T-SB-0304-17_Rev
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89

Bulletin Number: T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE

Bulletin Number: TSB-0358-09
TOYOTA: FUEL TANK PROTECTOR RATTLE NOISE. THE FUEL TANK BAND (RH) HAS BEEN IMPROVED TO CORRECT THIS CONDITION. *PE

Bulletin Number: T-SB-0391-08 Rev
This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.

Bulletin Number: TS-BO030-01 Obso
This bulletin is now obsolete. Please see T-SB-0185-13.

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0051-10
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0124-11
Please refer to the following recommendations for the best practices for vehicle tire rotations.

Bulletin Number: T-TT-0124-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0132-11
A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general

Bulletin Number: T-TT-0132-11
A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devi

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the

Bulletin Number: T-TT-0226-13
The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.

Bulletin Number: T-TT-0268-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0269-13
The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0372-15 REV
"TT: IN CERTAIN CASES, VEHICLES UNDERGOING THE ZE7 AZ OIL CONSUMPTION REPAIR PROCEDURE WILL REQUIRE A SHORT BLOCK REPLACEMENT. CURRENTLY, WHEN A NEW SHORT BLOCK ASSEMBLY IS ORDERED FOR A VEHICLE, DOWELS PINS CONNECTING THE SHORT BLOCK TO T

Bulletin Number: T-TT-0468-17-Rev
TT: HVAC drain tube is found to be blocked/clogged.


2008 TOYOTA COROLLA MATRIX:

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: TC-10-048
TOYOTA SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. REPLACE THE ENGINE ACCESSORY BELT ON CERTAIN MODEL YEAR COROLLA VEHICLES EQUIPPED WITH A 2ZR-FE ENGINE. THE ENGINE ACCESSORY BELT MAY HAVE BEEN IMPROPERLY MANUFACTURED.

Bulletin Number: TC13-019
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0141-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0150-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0051-10
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0124-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-TT-0268-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: ZE7_IMP 11/12
DD: IN LIMITED CASES VEHICLES BEING SERVICED FOR ZE7 WILL REQUIRE A REPLACEMENT SHORT BLOCK. DEALERS WILL NEED TO INSTALL THE DOWEL PINS BETWEEN THE SHORT BLOCK AND LOWER CRANKCASE WHEN PERFORMING THIS REPAIR. A TECH TIP WILL BE RELEASED IN

Bulletin Number: ZE7_IMP 11/12
DD: IN LIMITED CASES VEHICLES BEING SERVICED FOR ZE7 WILL REQUIRE A REPLACEMENT SHORT BLOCK. DEALERS WILL NEED TO INSTALL THE DOWEL PINS BETWEEN THE SHORT BLOCK AND LOWER CRANKCASE WHEN PERFORMING THIS REPAIR. A TECH TIP WILL BE RELEASED IN

 
Recalls for 2008 Toyota Yaris Liftback S 5-Spd MT
2008 TOYOTA COROLLA
NHTSA Campaign ID: 10V036000
Component: EQUIPMENT:OTHER:LABELS
Manufacturer: SOUTHEAST TOYOTA DISTRIBUTORS, LLC
Manufacture Dates: -
Potential Units Affected: 153418
Defect Description:
SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Consequence:
A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Action to take:
DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.
2008 TOYOTA COROLLA
NHTSA Campaign ID: 10V384000
Component: ENGINE AND ENGINE COOLING
Manufacturer: TOYOTA MOTOR NORTH AMERICA, INC.
Manufacture Dates: 04/19/2004 - 01/02/2008
Potential Units Affected: 1128659
Defect Description:
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2008 COROLLA AND COROLLA MATRIX VEHICLES. THE ENGINE CONTROL MODULE (ECM) FOR THE SUBJECT MODELS EQUIPPED WITH THE 1ZZ-FE ENGINE AND TWO-WHEEL DRIVE MAY HAVE BEEN IMPROPERLY MANUFACTURED. THERE IS A POSSIBILITY THAT A CRACK MAY DEVELOP AT CERTAIN SOLDER POINTS OR ON VARISTORS ON THE CIRCUIT BOARD.
Consequence:
THERE ARE A VARIETY OF WARNINGS AND CONSEQUENCES ASSOCIATED WITH THE DEFECT. THE ENGINE WARNING LAMP COULD BE ILLUMINATED, HARSH SHIFTING COULD RESULT, THE ENGINE MAY NOT START, OR THE ENGINE COULD SHUT OFF WHILE THE VEHICLE IS BEING DRIVEN. AN ENGINE SHUTOFF WHILE THE VEHICLE IS BEING DRIVEN INCREASES THE RISK OF A CRASH.
Action to take:
DEALERS WILL INSPECT THE PRODUCTION NUMBER OF THE ECM AND REPLACE THE ECM IF NECESSARY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. TOYOTA WILL MAIL AN INTERIM OWNER NOTIFICATION THE MIDDLE OF SEPTEMBER 2010 TO ADVISE OWNERS OF THIS DEFECT AND RECALL. THIS INTERIM NOTIFICATION WILL INFORM OWNERS THAT THEY WILL RECEIVE A FUTURE NOTIFICATION WHEN PARTS BECOME AVAILABLE TO HAVE THE FREE REMEDY PERFORMED ON THEIR VEHICLE. THE SAFETY RECALL BEGAN ON NOVEMBER 29, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
2008 TOYOTA COROLLA
NHTSA Campaign ID: 16V127000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 06/01/2007 - 12/21/2007
Potential Units Affected: 147242
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured May 25, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequence:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Action to take:
The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 23, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-285.
2008 TOYOTA COROLLA
NHTSA Campaign ID: 16V128000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 06/01/2007 - 12/21/2007
Potential Units Affected: 71163
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured June 1, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008 that were originally sold, or ever registered, in Florida, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan, American Samoa, Georgia, Alabama, Louisiana, Mississippi and Texas. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
Consequence:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Action to take:
The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 8, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-286.
2008 TOYOTA COROLLA
NHTSA Campaign ID: 19V627000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 01/04/2002 - 07/20/2007
Potential Units Affected: 219000
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2003-2008 Corolla, 2005-2008 Corolla Matrix, and Pontiac Vibe vehicles equipped with a front passenger air bag assembly replaced under a prior recall. The air bag may not unfold as designed during inflation under high temperature conditions, possibly resulting in the air bag not inflating properly.
Consequence:
An improperly inflated air bag increases the risk of injury during a crash.
Action to take:
Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the front passenger air bag assembly, free of charge. The recall is expected to begin September 25, 2019 for Toyota owners. Toyota owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are K1Q and K0Q. Pontiac owners may contact GM customer service at 1-800-762-2737. GM's number for this recall is N192273760.
2008 TOYOTA COROLLA MATRIX
NHTSA Campaign ID: 18V025000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 01/06/2002 - 12/13/2007
Potential Units Affected: 106922
Defect Description:
On January 9, 2018, Toyota Motor Engineering & Manufacturing (Toyota) notified NHTSA that they are recalling 14,585 model year 2010-2012 Yaris vehicles ever registered in the states of Alaska, Arizona, Arkansas, Colorado, Connecticut, Delaware, District of Columbia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Dakota, Tennessee, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, and Wyoming. As of January 30, 2018, Toyota is additionally recalling 3,347 model year 2010 Pontiac Vibe vehicles located in states listed above. Also included in this recall filing is 98,194 model year 2003-2008 Toyota Corolla Matrix vehicles, located throughout the U.S., that previously received a ┐like-for-like┐ interim air bag inflator replacement. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence:
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Action to take:
Toyota will notify owners, and dealers will replace the passenger frontal air bag assemblies with an alternate inflator, free of charge. The recall began on January 29, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are G0R (Zone B), and H0A (Zone C), J0A (Matrix Zone A), J0A (Matrix Zone A), J0A (Matrix Zone A).
2008 TOYOTA COROLLA MATRIX
NHTSA Campaign ID: 16V127000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 06/01/2007 - 12/18/2007
Potential Units Affected: 147242
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured May 25, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequence:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Action to take:
The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 23, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-285.
2008 TOYOTA COROLLA MATRIX
NHTSA Campaign ID: 19V627000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 04/25/2004 - 12/18/2007
Potential Units Affected: 219000
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2003-2008 Corolla, 2005-2008 Corolla Matrix, and Pontiac Vibe vehicles equipped with a front passenger air bag assembly replaced under a prior recall. The air bag may not unfold as designed during inflation under high temperature conditions, possibly resulting in the air bag not inflating properly.
Consequence:
An improperly inflated air bag increases the risk of injury during a crash.
Action to take:
Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the front passenger air bag assembly, free of charge. The recall is expected to begin September 25, 2019 for Toyota owners. Toyota owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are K1Q and K0Q. Pontiac owners may contact GM customer service at 1-800-762-2737. GM's number for this recall is N192273760.
2008 TOYOTA COROLLA MATRIX
NHTSA Campaign ID: 16V128000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Toyota Motor Engineering & Manufacturing
Manufacture Dates: 06/01/2007 - 12/18/2007
Potential Units Affected: 71163
Defect Description:
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured June 1, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles manufactured June 1, 2007, to January 2, 2008 that were originally sold, or ever registered, in Florida, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan, American Samoa, Georgia, Alabama, Louisiana, Mississippi and Texas. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
Consequence:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Action to take:
The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 8, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-286.
 


2016 Tesla Model S 2016.5 4dr Sdn RWD 75

  • Electronic Stability Control (ESC)
  • ABS And Driveline Traction Control
  • Side Impact Beams
  • Dual Stage Driver And Passenger Seat-Mounted Side Airbags
  • Front And Rear Parking Sensors
  • Blind Spot Sensor
  • Forward Collision and Rear Collision
  • Lane Departure Warning
  • Tire Specific Low Tire Pressure Warning
  • Dual Stage Driver And Passenger Front Airbags
  • Curtain 1st And 2nd Row Airbags
  • Airbag Occupancy Sensor
  • Driver And Passenger Knee Airbag
  • Restricted Driving Mode
  • Power Rear Child Safety Locks
  • Outboard Front Lap And Shoulder Safety Belts -inc: Rear Center 3 Point and Pretensioners
  • Back-Up Camera
  • Front Camera
  • Passenger Air Bag
  • Knee Air Bag
  • Passenger Air Bag Sensor
  • Driver Air Bag
  • Front Side Air Bag
  • Front Head Air Bag
  • Rear Head Air Bag
  • Lane Departure Warning
  • Stability Control
  • Blind Spot Monitor
  • Brake Assist
  • Headlights-Auto-Leveling
  • Daytime Running Lights
  • Cross-Traffic Alert
  • Traction Control
  • Child Safety Locks
 
Crash Test Results for the 2016 Tesla Models:
No crash test results exist
 
Service Bulletins for 2016 Tesla Model S 2016.5 4dr Sdn RWD 75
2016 TESLA MODEL S:

Bulletin Number: SB1313001R6
THIS SERVICE BULLETIN CONTAINS INSTALLATION INSTRUCTIONS FOR THE OPTIONAL THIRD ROW SEAT. INCLUDED IN THIS PROCEDURE ARE STEPS TO ADD THE REAR CROSSMEMBER (IF NEEDED), REMOVE AND MODIFY EXISTING TRIM PANELS, INSTALL HARDWARE, ADD THE 2ND RO

Bulletin Number: SB1315007R3
DESCRIBES HOW TO INSTALL THE CENTER CONSOLE FLOOR FINISHER TO MATCH THE DASH TRIM APPEARANCE.

Bulletin Number: SB1315014R4
DESCRIBES HOW TO INSTALL THE 1ST GENERATION PREMIUM CENTER CONSOLE ASSEMBLY.

Bulletin Number: SB1344010R4
UPGRADE A VEHICLE FROM A SINGLE 2ND GENERATION CHARGER TO DUAL 2ND GENERATION CHARGERS.

Bulletin Number: SB1344010R4
UPGRADE A VEHICLE FROM A SINGLE 2ND GENERATION CHARGER TO DUAL 2ND GENERATION CHARGERS.

Bulletin Number: SB-13-90-002 R3
Instructions for installing the carbon fiber spoiler.

Bulletin Number: SB-15-16-003 R1
It is possible to accidentally break off the aeroshield support tab from the HV Battery. If the tab breaks, the mid aeroshield is not fully supported, reducing the aerodynamic efficiency of the vehicle. The operation of the HV Battery is no

Bulletin Number: SB-15-16-003 R1
It is possible to accidentally break off the aeroshield support tab from the HV Battery. If the tab breaks, the mid aeroshield is not fully supported, reducing the aerodynamic efficiency of the vehicle. The operation of the HV Battery is no

Bulletin Number: SB1615001
DESCRIBES HOW TO RETROFIT THE 2ND GENERATION PREMIUM CENTER CONSOLE ASSEMBLY.

Bulletin Number: SB-16-17-010
On some Model S vehicles, the G625 ground branch of the front body electrical harness might have extra slack. This might cause chafing or other damage to the ground cable.

Bulletin Number: SB-16-17-010
On some Model S vehicles, the G625 ground branch of the front body electrical harness might have extra slack. This might cause chafing or other damage to the ground cable.

Bulletin Number: SB-16-44-004
Some third generation chargers could have an internal fault that prevents DC fast charging (Supercharging or CHAdeMO).

Bulletin Number: SB1690001
DESCRIBES HOW TO INSTALL THE PERFORMANCE PEDAL SET ACCESSORY.

Bulletin Number: SB1690001
DESCRIBES HOW TO INSTALL THE PERFORMANCE PEDAL SET ACCESSORY.

Bulletin Number: SB-17-10-001
On some Model S vehicles, the leading edge of the glass roof might be a source of wind noise.

Bulletin Number: SB-17-10-006 R1
On Model S, the windshield wiper motor bracket might become loose, resulting in a popping or clicking noise during windshield wiper operation.

Bulletin Number: SB-17-13-002
On some Model S and Model X vehicles, the connection of the hook-and-loop material that secures the seat upholstery to the seat cushion foam might weaken, causing the upholstery to gather and cause wrinkles.

Bulletin Number: SB-17-13-002
On some Model S and Model X vehicles, the connection of the hook-and-loop material that secures the seat upholstery to the seat cushion foam might weaken, causing the upholstery to gather and cause wrinkles.

Bulletin Number: SB-17-13-005 R2
On some Model S and Model X front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking mo

Bulletin Number: SB-17-13-005 R3
On some Model S and Model X front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking mo

Bulletin Number: SB-17-13-005 R3
On some Model S and Model X front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking mo

Bulletin Number: SB-17-17-002
On some vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might be out of the specifications required for some future Autopilot features.

Bulletin Number: SB-17-17-002
On some vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might be out of the specifications required for some future Autopilot features.

Bulletin Number: SB-17-17-002 R1
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might be out of the specifications required for some future Autopilot features.

Bulletin Number: SB-17-17-002 R1
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might be out of the specifications required for some future Autopilot features.

Bulletin Number: SB-17-17-002 R2
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might not conform to internal specifications.

Bulletin Number: SB-17-17-002 R2
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might not conform to internal specifications.

Bulletin Number: SB-17-17-002 R2
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might not conform to internal specifications.

Bulletin Number: SB-17-17-002 R3
On some Model S and Model X vehicles with 2nd generation Autopilot, the forward facing camera pitch (vertical angle) might not conform to internal specifications.

Bulletin Number: SB-17-31-001
Some Model S and Model X vehicles may have been manufactured with front suspension fore links that may not meet Tesla strength specifications. In the event of link failure, the driver can still maintain control of the vehicle but the tire m

Bulletin Number: SB-17-31-001
Some Model S and Model X vehicles may have been manufactured with front suspension fore links that may not meet Tesla strength specifications. In the event of link failure, the driver can still maintain control of the vehicle but the tire m

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002 R1
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-13-002 R2
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-13-002 R2
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-15-006
On some Model X vehicles, incorrect routing of the intrusion sensor wires might result in electrical interference between the intrusion sensor and the intrusion sensor electrical control unit (ECU). The electrical interference causes the ca

Bulletin Number: SB-18-31-001
Some Model S vehicles were manufactured with front suspension lower fore links that do not meet Tesla?s internal specifications. The lower fore link may contact the sway bar mounting bracket, causing noise and the risk for damage to front s

Bulletin Number: SB-18-32-002 R1
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-18-32-002 R3
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-18-32-002 R3
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-19-20-001
The propellant in the front passenger airbag inflator might degrade over time, which could cause the inflator body to rupture in the event the airbag is deployed.

Bulletin Number: SB-19-20-001 R1
The propellant in the front passenger airbag inflator might degrade over time, which could cause the inflator body to rupture in the event the airbag is deployed.

Bulletin Number: SB-19-39-001
During hard acceleration, the driver might notice vibrations coming from the front of some Model S or Model X vehicles.

Bulletin Number: SB-19-39-001
During hard acceleration, the driver might notice vibrations coming from the front of some Model S or Model X vehicles.

Bulletin Number: SB-19-39-001 R2
Older versions of the Model S and Model X LH front drive unit clevis mount contain a bushing that allows the front drive unit to move side-to-side more than expected during hard accelerations, resulting in excessive vibrations coming from t

 
Recalls for 2016 Tesla Model S 2016.5 4dr Sdn RWD 75
2016 TESLA MODEL S
NHTSA Campaign ID: 17V260000
Component: PARKING BRAKE
Manufacturer: Tesla Motors, Inc.
Manufacture Dates: 07/12/2012 - 11/17/2016
Potential Units Affected: 31709
Defect Description:
Tesla, Inc. (Tesla) is recalling certain 2016 Model S and Model X vehicles. The electric parking brake calipers have an internal gear that may be improperly manufactured, possibly resulting in the gear fracturing during parking brake application or release.
Consequence:
If the gear breaks during parking brake release, the vehicle will not be able to be moved. If the gear breaks during parking brake application, the parking brake may not adequately hold the vehicle, potentially resulting in the vehicle rolling, increasing the risk of a crash.
Action to take:
Tesla will notify owners, and service centers will replace the electric parking brake calipers, free of charge. A remedy is currently unavailable. Interim notices informing owners of the safety risk were mailed June 8, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-17-33-002.
2016 TESLA MODEL S
NHTSA Campaign ID: 18V204000
Component: STEERING:ELECTRIC POWER ASSIST SYSTEM
Manufacturer: Tesla, Inc.
Manufacture Dates: 05/31/2012 - 04/09/2016
Potential Units Affected: 70421
Defect Description:
Tesla, Inc. (Tesla) is recalling certain 2012-2016 Tesla Model S vehicles equipped with Bosch steering racks. The aluminum bolts that attach the power steering gear assist motor to the gear housing may corrode and fracture causing a reduction or complete loss of power steering assist.
Consequence:
Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.
Action to take:
Tesla will notify owners, and Tesla Service Centers will replace the steering gear mounting bolts and add a corrosion-preventative sealer, free of charge. The recall began May 7, 2019. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-18-32-002.
2016 TESLA MODEL S
NHTSA Campaign ID: 19V002000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Tesla, Inc.
Manufacture Dates: 01/01/2014 - 12/09/2016
Potential Units Affected: 68673
Defect Description:
Tesla, Inc. (Tesla) is recalling all 2014-2016 Model S vehicles equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence:
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Action to take:
Tesla will notify owners, and Tesla Service Centers will replace the passenger frontal air bag modules, free of charge. The recall began May 29, 2019. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-19-20-001.
 






Fuel Economy | Crash Results

Compar-A-Graphs:
4 Car Comparison | Rank-by-Specs
THE AUTO CHANNEL: Auto Channel Home | Auto News | Car Reviews | Media Library | Forums | Classifieds