THE AUTO CHANNEL:   TACH Home | Auto News | Reviews | Media | Forums | Classifieds

USED CAR BUYER'S GUIDE


Fuel Economy | Crash Results | Recalls | Service Bulletins | Site Map

SUV    Sedan    Truck    Van    Convertible   Coupe    Wagon   Luxury    Hybrid      CUV
Compar-A-Graphs:    Rank-By-Specs    or  4-Car Comparison
Click to print
Compare Cars Side by Side on
Safety Features



2003 Toyota Camry LE V6 4AT

  • Driver and passenger front airbag
  • Two height adjustable head restraints on front seats and rear seats
  • Bucket driver seat with height adjustment, lumbar adjustment and - adjustments , bucket passenger seat with - adjustments
 
Crash Test Results for the 2003 Toyota Models:
Car Frontal Star Rating Side Star Rating Rollover
Resistance
Rating
Driver Pass. Front Seat Rear Seat
2003 Toyota 4Runner 44553
2003 Toyota Avalon 45454
2003 Toyota Camry 54354
2003 Toyota Celica 443Not
Tested
5
2003 Toyota Corolla 55444
2003 Toyota Echo 44344
2003 Toyota Echo Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Highlander 44553
2003 Toyota Landcruiser Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Matrix 55544
2003 Toyota Matrix 55544
2003 Toyota MR2 Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Prius 34334
2003 Toyota RAV4 44553
2003 Toyota RAV4 EV Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Sequoia 55Not
Tested
Not
Tested
3
2003 Toyota Sienna 55454
2003 Toyota Solara Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Solara Not
Tested
Not
Tested
35Not
Tested
2003 Toyota Tacoma 343Not
Tested
Not
Tested
2003 Toyota Tacoma 4455Not
Tested
2003 Toyota Tundra Not
Tested
Not
Tested
Not
Tested
Not
Tested
Not
Tested
2003 Toyota Tundra 445Not
Tested
3
 
Service Bulletins for 2003 Toyota Tundra LE V6 4AT
2003 TOYOTA CAMRY:

Bulletin Number: 000404
FRONT BRAKE COMPONENT IDENTIFICATION. *TT

Bulletin Number: 00103
AIR CONDITIONER PERFORMANCE AND DURABILITY IMPROVEMENT. *TT

Bulletin Number: 00106
STEERING INTERMEDIATE SHAFT NOISE. *AK

Bulletin Number: 00203
PART NUMBERS FOR THE INTAKE AIR SURGE TANK HAVE BEEN UPDATED. THIS SERVICE BULLETIN REPLACES EG00202 FOR THE 2003 CAMRY. *EH

Bulletin Number: 00203
STEERING COLUMN NOISE. *TT

Bulletin Number: 00203
SLIDING ROOF REPAIR TIPS. *TT

Bulletin Number: 00203
CREAK NOISE AT TOP OF GLASS. *TT

Bulletin Number: 00203
MALFUNCTION INDICATOR LAMP ON CONDITION WITH DIAGNOSTIC TROUBLE CODE P2102, P2103, P2111, P2112 OR P2119 STORED IN THE ENGINE CONTROL MODULE. *TT

Bulletin Number: 00204
THE PROPER IDENTIFICATION OF THE 7 SOLENOIDS USED IN THE U151E/U151F TRANSMISSIONS. *TT

Bulletin Number: 00205
BRAKE PEDAL VIBRATION FEELING. *SC

Bulletin Number: 00207
TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. *KB

Bulletin Number: 00302
DIAGNOSTIC TESTER IMMOBILIZER FUNCTIONS - REVISED. *TT

Bulletin Number: 00304
A/C COMPRESSOR INSTALLATION PROCEDURE. *MR

Bulletin Number: 00403
POWER FRONT SEAT LOOSE FEEL. *TT

Bulletin Number: 00403
AIR CONDITIONER PERFORMANCE AND DURABILITY IMPROVEMENT. *TT

Bulletin Number: 00503
CREAK/TICK NOISE AT BASE OF WINDSHIELD. *TT JB

Bulletin Number: 00504
PROPER IDENTIFICATION OF THE 5 SOLENOIDS USED IN THE U240E/U241E AUTOMATIC TRANSAXLES. *TT

Bulletin Number: 00602
FRONT BRAKE VIBRATION. *TT

Bulletin Number: 00603
FRONT SUSPENSION LOWER ARM INSTALLATION TORQUE. *TT

Bulletin Number: 00803
ENGINE CONTROL MODULE (ECM) CALIBRATION - SHIFTING ENHANCEMENT. *TT

Bulletin Number: 00803
SURGING DURING LIGHT THROTTLE INPUT AT SPEEDS BETWEEN 38-42 MPH WITH LOCK-UP (L/U) ON. *TT *JB

Bulletin Number: 00902
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODES P1125, P1128 OR P1129. *TT

Bulletin Number: 01103
CENTER CONSOLE LID LATCH NOW AVAILABLE AS A SERVICE PART. *TT *JB

Bulletin Number: 01104
EXCESSIVE SULFUR DIOXIDE ODOR. *TT UPDATE. *TT

Bulletin Number: 01105
COUNTERMEASURES TO THE AIR CONDITIONER (A/C) MAGNETIC CLUTCH RELAY FOR A/C LIGHT FLASHING (INOPERATIVE A/C) ISSUES ON SOME VEHICLES EQUIPPED WITH A MAGNETIC CLUTCH COMPRESSOR. *TT

Bulletin Number: 01304
EXCESSIVE SULFUR DIOXIDE ODOR ON VEHICLES EQUIPPED WITH THE 2AZ-FE ENGINE WHEN STOP AND GO DRIVING AND/OR HEAVY ACCELERATION. *TT

Bulletin Number: 01503
MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODE (DTC) P0031, P0051, P2238 OR P2241. *TT

Bulletin Number: 01503
WATER LEAK AT FRONT FLOOR. *TT

Bulletin Number: 01504
FUEL DOOR IMPROVEMENT. *TT

Bulletin Number: 01507
2AZ-FE ENGINE BLOCK. *KB

Bulletin Number: 01603
ENGINE CONTROL MODULE (ECM) CALIBRATION UPDATE - MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODE P0142. *TT

Bulletin Number: 01804
INTAKE MANIFOLD NOISE. *MJ WARRANTY INFORMATION CHANGE. *TT

Bulletin Number: 02103
SLIDING ROOF REPAIR TIPS. THE INFORMATION CONTAINED IN THIS TSB SUPERCEDES BO002-03. *TT

Bulletin Number: 02202
TRIPLE SHOCK (SHUDDER) DURING THE 2-3 UP SHIFT UNDER LIGHT THROTTLE ACCELERATION. *TT

Bulletin Number: 02206
M.I.L. ON DTC P0440, P0441, P0442, P0446, AND/OR P0456 - FUEL FILLER TUBE IMPROVEMENT. *TT

Bulletin Number: 02404
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE P0420. *TT

Bulletin Number: 02502
DISCONTINUANCE OF FRONT COIL SPRING SPACERS. *TT

Bulletin Number: 02802
WHEEL FILM FOR BRAKE ROTOR RUST PREVENTION. *TT

Bulletin Number: 02802
WHEEL FILM FOR BRAKE ROTOR RUST PREVENTION. *TT

Bulletin Number: 03101
WINDSHIELD WIPER REPLACEMENT. *TT

Bulletin Number: 03704
ENGINE BANK 1 AND BANK 2 A/F AND 02 IDENTIFICATION. VARIOUS TOYOTA MODELS. *TT

Bulletin Number: 04004
ACCESSORY DRIVE BELT SQUEAL/ BELT TENSIONER RATTLE. *NM

Bulletin Number: 05104
MALFUNCTION INDICATOR LAMP ON DIAGNOSTIC TROUBLE CODE P0604, P0606 AND/OR P0607. *TT

Bulletin Number: AX00402
THIS BULLETIN CONTAINS DETAILED INSTRUCTIONS COVERING THE REMOVAL AND REPLACEMENT OF THE ASHTRAY / LIGHTER. *TT

Bulletin Number: BO01503
WATER LEAK AT THE FRONT FLOOR AREA. *TT

Bulletin Number: EG01303
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE P0440, P0441 AND/OR P0446 STORED. *TT

Bulletin Number: EG01303R
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE P0440, P0441 AND/OR P0446 STORED. *TT

Bulletin Number: NV01003
FRONT DOOR GLASS WIND NOISE. *TT

Bulletin Number: NV01003
FRONT DOOR GLASS WIND NOISE. *TT

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: POL14-11
TOYOTA 2003-2008: INFORMATION REGARDING WARRANTY EXTENSION FOR CRACKED OR STICKY/ MELTING DUE TO HEAT AND HUMIDITY FOR CERTAIN VEHICLES. MY RUNNER, AVALON, CAMRY& HYBRID, SIENNA, SOLARA. *LJ

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: SB-0015-11
TOYOTA: THERE MAY BE DAMAGED CYLINDER HEAD BOLTS THREADS. *RM

Bulletin Number: SST Requirements
SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.

Bulletin Number: TC03015
THE THROTTLE BODY MOTOR MAY MALFUNCTION CAUSING THE MALFUNCTION INDICATOR LIGHT (MIL) TO ILLUMINATE ON THE DASH, AND THE ENGINE CONTROL MODULE (ECM) WILL STORE A TROUBLE CODE AND PLACE THE VEHICLE INTO A LIMP HOME MODE. TOYOTA WILL INITIAT

Bulletin Number: TC13-019
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-PG006-00 Obsol
This bulletin is now obsolete. Please see T-SB-0054-13.

Bulletin Number: T-SB-0012-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0012-13
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0012-13 Rev
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bullet

Bulletin Number: T-SB-0012-13 Rev
TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16.

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-003-01 - OB
TSB: OBSOLETE NOTICE: July 7, 2014: This bulletin is now obsolete.

Bulletin Number: T-SB-0034-08 R2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0034-08 Rev
Some 2002 ? 2004 model year non-PZEV Camry vehicles with the 2AZ-FE engine may exhibit the following condition: A rattle noise from the engine area, most noticeable at idle or on light acceleration. The noise may be caused by the intake ai

Bulletin Number: T-SB-0034-08 Rev
Some 2002 ? 2004 model year non-PZEV Camry vehicles with the 2AZ-FE engine may exhibit the following condition: A rattle noise from the engine area, most noticeable at idle or on light acceleration. The noise may be caused by the intake ai

Bulletin Number: T-SB-0043-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0054-13
California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guide

Bulletin Number: T-SB-0054-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0057-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obso

Bulletin Number: TSB-0064-10
TOYOTA: TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DE

Bulletin Number: T-SB-0064-10 Rev
This bulletin is now obsolete. Please see T-SB-0012-13.

Bulletin Number: T-SB-0064-10 Rev
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0071-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when

Bulletin Number: TSB-0072-10
TOYOTA: ENGINE CONROL. SOME VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0500-VEHICLE SPEED SENSOR A. THE ENGINE CONTROL MODULE/ECM (SAE TERM: POWERTRAIN CONTROLS MODULE /PCM) LOGIC HAS BEEN MODIFIED TO REDU

Bulletin Number: TSB-0072-10
TOYOTA: ENGINE CONROL. SOME VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0500-VEHICLE SPEED SENSOR A. THE ENGINE CONTROL MODULE/ECM (SAE TERM: POWERTRAIN CONTROLS MODULE /PCM) LOGIC HAS BEEN MODIFIED TO REDU

Bulletin Number: T-SB-0083-13 Rev
TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Bulletin Number: T-SB-0083-13 Rev
TSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.

Bulletin Number: TSB-0087-12
TOYOTA: ACCELERATOR PEDAL SENSOR ASSEMBLY INFORMATION REGARDING THE INSPECTION, REMOVAL, AND INSTALLATION, IF LUBRICATION OR OIL, IS APPLIED. *PE

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0122-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: TSB-0122-11
TOYOTA: INFORMATION PROVIDED FOR REPLACING THE SEAT COVERS FOR VEHICLES EQUIPPED WITH SIDE AIRBAGS. *PE

Bulletin Number: TSB-0122-11
TOYOTA: INFORMATION PROVIDED FOR REPLACING THE SEAT COVERS FOR VEHICLES EQUIPPED WITH SIDE AIRBAGS. *PE

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16_Rev
TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0141-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0144-08_Obs
TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: TSB018217
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed

Bulletin Number: T-SB-0185-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.

Bulletin Number: T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deplo

Bulletin Number: T-SB-0218-17_Rev
TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deplo

Bulletin Number: T-SB-0229-12_Rev
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerg

Bulletin Number: T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria lis

Bulletin Number: T-SB-0304-17_Rev
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89

Bulletin Number: T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE

Bulletin Number: TSB-0339-10
TOYOTA: SOME VEHICLES MAY MAKE A WATER LEAK AT THE FRONT FLOOR AREA. THERE IS A SEALER PROBLEM ON THE ENGINE COMPARTMENT WALL. *RM

Bulletin Number: T-SB-0391-08 Rev
This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.

Bulletin Number: TS-BO030-01 Obso
This bulletin is now obsolete. Please see T-SB-0185-13.

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0132-11
A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general

Bulletin Number: T-TT-0132-11
A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devi

Bulletin Number: T-TT-0226-13
The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.

Bulletin Number: T-TT-0269-13
The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0381-16
TECH TIP: SOME CUSTOMERS MAY EXPERIENCE DIFFICULTY PROGRAMMING HOMELINK.

Bulletin Number: T-TT-0381-16
Tech Tip: Some customers may experience difficulty programming HomeLink.


2003 TOYOTA CAMRY SOLARA:

Bulletin Number: 00103
BOOMY OR EXCESSIVE BASS FROM THE JBL AUDIO SYSTEM. *TT

Bulletin Number: 00207
TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. *KB

Bulletin Number: 00304
A/C COMPRESSOR INSTALLATION PROCEDURE. *MR

Bulletin Number: 00504
PROPER IDENTIFICATION OF THE 5 SOLENOIDS USED IN THE U240E/U241E AUTOMATIC TRANSAXLES. *TT

Bulletin Number: 01005
A541E TRANSMISSION SOLENOID IDENTIFICATION. *TT

Bulletin Number: 01404
EXCESSIVE SULFUR DIOXIDE ODOR. *TT

Bulletin Number: 01507
2AZ-FE ENGINE BLOCK. *KB

Bulletin Number: 02802
WHEEL FILM FOR BRAKE ROTOR RUST PREVENTION. *TT

Bulletin Number: 02802
WHEEL FILM FOR BRAKE ROTOR RUST PREVENTION. *TT

Bulletin Number: 04004
ACCESSORY DRIVE BELT SQUEAL/ BELT TENSIONER RATTLE. *NM

Bulletin Number: 05104
MALFUNCTION INDICATOR LAMP ON DIAGNOSTIC TROUBLE CODE P0604, P0606 AND/OR P0607. *TT

Bulletin Number: 06205
ECM CALIBRATION UPDATE: 2-AZ-FE ENGINE MALFUNCTION INDICATOR ON DIAGNOSTIC TROUBLE CODE P2238. *AK

Bulletin Number: EG01303
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE P0440, P0441 AND/OR P0446 STORED. *TT

Bulletin Number: EG01303R
MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE P0440, P0441 AND/OR P0446 STORED. *TT

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: POL14-11
TOYOTA 2003-2008: INFORMATION REGARDING WARRANTY EXTENSION FOR CRACKED OR STICKY/ MELTING DUE TO HEAT AND HUMIDITY FOR CERTAIN VEHICLES. MY RUNNER, AVALON, CAMRY& HYBRID, SIENNA, SOLARA. *LJ

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: Safety Recall an
Update on Technician Certification Requirements.

Bulletin Number: SST Requirements
SSTs are key elements to provide your customers with swift and accurate repairs resulting in superior customer satisfaction.

Bulletin Number: TC13-019
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-PG006-00 Obsol
This bulletin is now obsolete. Please see T-SB-0054-13.

Bulletin Number: T-SB-0012-13
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0012-13 Rev
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bullet

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: T-SB-0012-13 REV
"TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BUL

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: TSB-0012-13 Rev2
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bull

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing w

Bulletin Number: T-SB-003-01 - OB
TSB: OBSOLETE NOTICE: July 7, 2014: This bulletin is now obsolete.

Bulletin Number: T-SB-0043-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: T-SB-0043-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to

Bulletin Number: T-SB-0054-13
California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guide

Bulletin Number: T-SB-0057-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obso

Bulletin Number: T-SB-0064-10 Rev
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin de

Bulletin Number: T-SB-0064-10 Rev
This bulletin is now obsolete. Please see T-SB-0012-13.

Bulletin Number: T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or othe

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0122-11 Rev
Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when insta

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16
TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16-Rev
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has be

Bulletin Number: T-SB-0134-16_Rev
TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-10 Rev
If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0141-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Bulletin Number: T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the B

Bulletin Number: T-SB-0144-08_Obs
TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.

Bulletin Number: TSB018217
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed

Bulletin Number: T-SB-0185-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.

Bulletin Number: T-SB-0229-12_Rev
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerg

Bulletin Number: T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria lis

Bulletin Number: T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE

Bulletin Number: T-SB-0304-17_Rev
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89

Bulletin Number: T-SB-0391-08 Rev
This bulletin contains general vehicle pulling diagnosis and repair procedures along with specific information to help correct pulling complaints.

Bulletin Number: TS-BO030-01 Obso
This bulletin is now obsolete. Please see T-SB-0185-13.

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0086-11
TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the

Bulletin Number: T-TT-0213-13
Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devi

Bulletin Number: T-TT-0226-13
The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off.

Bulletin Number: T-TT-0269-13
The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0362-15
TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.

Bulletin Number: T-TT-0381-16
Tech Tip: Some customers may experience difficulty programming HomeLink.

Bulletin Number: T-TT-0381-16
TECH TIP: SOME CUSTOMERS MAY EXPERIENCE DIFFICULTY PROGRAMMING HOMELINK.

 
Recalls for 2003 Toyota Tundra LE V6 4AT
2003 TOYOTA CAMRY
NHTSA Campaign ID: 04V346000
Component: AIR BAGS:SIDE/WINDOW
Manufacturer: TOYOTA MOTOR NORTH AMERICA, INC.
Manufacture Dates: 10/22/2001 - 02/10/2004
Potential Units Affected: 128316
Defect Description:
ON CERTAIN VEHICLES EQUIPPED WITH CURTAIN SHIELD AIR BAGS (CSA), ONE OR BOTH OF THE CURTAIN AIR BAGS MAY BE TWISTED NEAR THE INFLATOR DUE TO IMPROPER ASSEMBLY.
Consequence:
IF THIS OCCURS, THE CSA MAY NOT DEPLOY RAPIDLY ENOUGH WHEN ACTIVATED IN A SIDE IMPACT COLLISION. THIS MAY RESULT IN FAILURE TO PROVIDE THE INTENDED HEAD PROTECTION, INCREASING THE RISK OF INJURY.
Action to take:
DEALERS WILL INSPECT THE CSAS AND REPLACE THE AIR BAG ASSEMBLY IF NECESSARY. THE RECALL BEGAN ON AUGUST 6, 2004. OWNERS SHOULD CONTACT TOYOTA AT 1-800-331-4331.
 


2013 Tesla Model S Base

  • Driver Airbag
  • Seat Mounted Front Side Airbags
  • Front Dual Knee Airbags
  • Passenger Airbag Cutoff Sensor
  • Passenger Airbag
  • Front and Rear Side Head Curtain Airbags
  • Rear Electronic Parking Aid With Camera
  • Rear Center 3-Point Seatbelts
  • Front Pretensioners
  • Side Guard Door Beams
 
Crash Test Results for the 2013 Tesla Models:
No crash test results exist
 
Service Bulletins for 2013 Tesla Model S Base
2013 TESLA MODEL S:

Bulletin Number: 13-31-003
TESLA MOTORS, INC 2012-2013 MODEL S: INFORMATION REGARDING FRONT LOWER CONTROL ARM BALL JOINTS DEVELOPING GREATER FREE PLAY THAN EXPECTED. INSTALLING (4)WEDGE- LOCK WASHERS ON THE LOWER ARM BALL JOINT WILL CORRECT THE PROBLEM. *LJ

Bulletin Number: 14-40-001
TESLA MOTORS INC 2013-2014 MODEL S : BULETIN INFORMATION REGARDING REPLACING REAR DRIVE UNIT. SOME UNITS HAVE INADEQUATE GREASE, WHICH MAY CAUSE A LOUD CLUNKING SOUND DURING ACCELERATOR. *LJ

Bulletin Number: 15-17-005
TESLA MOTORS, INC 2012-2014: BULLETIN INFORMATION REGARDING UPGRADED 12V POSITIVE JUMP POST NEEDS REPLACEMENT OF THE OLD POST WHICH CAN CAUSE CORROSION & PREVENT EXTERNAL CHARGING OF THE 12V BATTERY. *LJ

Bulletin Number: SB-12-17-013
TESLA: SOME 12V BATTERY, IF OVERTORQUED, ARE SUSCEPTIBLE TO WEAKENING AND BREAKAGE FROM POSITIVE TERMINALS WITH CASTING POROSITY AND IF TERMINAL FAILS, AFTER IGNITION IS OFF, WILL NOT RESTART. MODEL 2012 MODEL S. *PE

Bulletin Number: SB-12-31-001
TESLA: BECAUSE OF IMPROPER PRELOAD ON REAR WHEEL BEARINGS, DUE TO REPEATED HEAVY ACCELERATION, CAN CAUSE REAR WHEEL AXLE NUTS TO LOSE PROPER TORQUE AND PREMATURE BEARING WEAR. MODEL 2012 MODEL S. *PE UPDATED 1/24/2014 *JS

Bulletin Number: SB-12-34-002
TESLA: ONCE VEHICLE IS PARKED, AIR IN TIRES (21 INCH WHEELS) COOLS, IN COLD AMBIENT TEMPERATURES, CAN CAUSE TIRE PRESSURE TO DECREASE BELOW THRESHOLD, WHICH IS CLOSE TO PROPER INFLATION PRESSURE, RESULTING IN ILLUMINATION OF TIRE PRESSURE I

Bulletin Number: SB-12-44-005
TESLA MOTORS: PROCEDURES TO RECONFIGURE THE COOLANT LINES AND FIRMWARE IN ORDER TO INSTALL A SECOND CHARGER. MODEL INCLUDES MODEL S ALL MODEL YEARS. *JS

Bulletin Number: SB1313001R6
THIS SERVICE BULLETIN CONTAINS INSTALLATION INSTRUCTIONS FOR THE OPTIONAL THIRD ROW SEAT. INCLUDED IN THIS PROCEDURE ARE STEPS TO ADD THE REAR CROSSMEMBER (IF NEEDED), REMOVE AND MODIFY EXISTING TRIM PANELS, INSTALL HARDWARE, ADD THE 2ND RO

Bulletin Number: SB1315007R3
DESCRIBES HOW TO INSTALL THE CENTER CONSOLE FLOOR FINISHER TO MATCH THE DASH TRIM APPEARANCE.

Bulletin Number: SB1315014R4
DESCRIBES HOW TO INSTALL THE 1ST GENERATION PREMIUM CENTER CONSOLE ASSEMBLY.

Bulletin Number: SB-13-24-006 R3
Some Model S vehicles might experience wind noise from the leading edge of the panoramic roof at high speed.

Bulletin Number: SB-13-34-001
TESLA: PAINTED LUG NUTS OR OVERSPRAY PAINT ON SEAT, MIGHT BE CORRODED IN THREAD AREA, LEADING TO INADEQUATE CLAMPING TORQUE AND NEEDS TO BE CORRECTED TO PREVENT VIBRATION, SHIMMING, KNOCKING OR CLUNKING NOISE, WHILE DRIVING. MODEL 2012 MO

Bulletin Number: SB-13-34-001
TESLA: PAINTED LUG NUTS OR OVERSPRAY PAINT ON SEAT, MIGHT BE CORRODED IN THREAD AREA, LEADING TO INADEQUATE CLAMPING TORQUE AND NEEDS TO BE CORRECTED TO PREVENT VIBRATION, SHIMMING, KNOCKING OR CLUNKING NOISE, WHILE DRIVING. MODEL 2012 MO

Bulletin Number: SB-13-44-010
TESLA: INFORMATION PROVIDED IN REGARDS TO INSTALLING A SECOND (SLAVE) CHARGER THAT IS CURRENTLY CONFIGURED, IN A VEHICLE, WITH ONLY ONE MASTER CHARGER. MODEL 2013-15 S. *PE

Bulletin Number: SB-13-44-010
TESLA: INFORMATION PROVIDED IN REGARDS TO INSTALLING A SECOND (SLAVE) CHARGER THAT IS CURRENTLY CONFIGURED, IN A VEHICLE, WITH ONLY ONE MASTER CHARGER. MODEL 2013-15 S. *PE

Bulletin Number: SB1344010R4
UPGRADE A VEHICLE FROM A SINGLE 2ND GENERATION CHARGER TO DUAL 2ND GENERATION CHARGERS.

Bulletin Number: SB1344010R4
UPGRADE A VEHICLE FROM A SINGLE 2ND GENERATION CHARGER TO DUAL 2ND GENERATION CHARGERS.

Bulletin Number: SB-13-50-003
TESLA MOTORS INC. : INSTRUCTIONS ON REASSEMBLY OF HPWC FUSES. *LJ

Bulletin Number: SB-13-90-002 R3
Instructions for installing the carbon fiber spoiler.

Bulletin Number: SB-13-96-002
TESLA MOTORS INC. : SERVICE BULLETIN SUPERSEDES SB-12-95-002 REVISION DATED NOVEMBER 12, 2012 . MRB PARTS RETURNS LIST FOR ALL NON-MAINTENANCE RELATED MODEL S PARTS EXCEPT 6005894 & 1021634. *LJ

Bulletin Number: SB-14-17-003
TESLA: INFORMATION AND INSTRUCTIONS REGARDING REPLACEMENT OF REAR DOORS, ON SOME VEHICLES, THAT MAY BE COMPATIBLE BUT FAIL TO HAVE SAME MOUNTING POINTS FOR ELECTRICAL HARNESS. MODEL 2012-2014 S. *PE

Bulletin Number: SB-14-21-004
TESLA: INSIDE INSTRUMENT CLUSTER (IC), CIRCUIT BOARD WAS SOLDERED, WHILE USING AN IMPROPER FLUX, IN SOME VEHICLES, AND CAN LEAD TO SHORTER THAN EXPECTED LIFESPAN AND QUALITY CONCERNS. MODEL 2012-2014 S. *PE

Bulletin Number: SB-14-30-002 R4
Three metal plates are installed on the front subframe to deflect road debris and protect the underbody from possible damage.

Bulletin Number: SB-14-40-001
TESLA: 2013-2014 MODEL S: INFORMATION REGARDING REPLACING REAR DRIVE UNIT PRODUCED WITH INADEQUATE GREASE, WHICH COULD LEAD TO A "CLUNK" SOUND WHEN USING THE ACCELERATOR WHILE DRIVING. *LJ

Bulletin Number: SB14-50-002 R1
TESLA: WHEN CHARGING, CORROSION, PHYSICAL DAMAGE TO RECEPTACLES, OR INAPPROPRIATE WIRING OR INSTALLATION OF ELECTRICAL OUTLETS CAN CAUSE HIGHER THAN NORMAL ELECTRICAL RESISTANCE. MODEL 2012-2014 S. *PE

Bulletin Number: SB-15-11-001
TESLA MOTORS: 2012-2014 S MODELS; BULLETIN INSTRUCTIONS AND REPAIR GUIDELINES FOR DRAFT ENTERING CABIN FROM A-PILLAR. *LJ

Bulletin Number: SB-15-11-001
TESLA MOTORS: 2012-2014 S MODELS; BULLETIN INSTRUCTIONS AND REPAIR GUIDELINES FOR DRAFT ENTERING CABIN FROM A-PILLAR. *LJ

Bulletin Number: SB-15-16-002 R1
It is possible to accidentally break off the aeroshield support tab from the HV Battery. If the tab breaks, the mid aeroshield is not fully supported, reducing the aerodynamic efficiency of the vehicle. The operation of the HV Battery is no

Bulletin Number: SB-15-16-002 R1
It is possible to accidentally break off the aeroshield support tab from the HV Battery. If the tab breaks, the mid aeroshield is not fully supported, reducing the aerodynamic efficiency of the vehicle. The operation of the HV Battery is no

Bulletin Number: SB1517003R2
IT IS NOW POSSIBLE TO RETROFIT THE CONTINENTAL TIRE PRESSURE MONITORING SYSTEM (TPMS) ONTO VEHICLES THAT WERE ORIGINALLY EQUIPPED WITH A BAOLONG TPMS.

Bulletin Number: SB1517003R2
IT IS NOW POSSIBLE TO RETROFIT THE CONTINENTAL TIRE PRESSURE MONITORING SYSTEM (TPMS) ONTO VEHICLES THAT WERE ORIGINALLY EQUIPPED WITH A BAOLONG TPMS.

Bulletin Number: SB-15-17-003 R3
It is now possible to retrofit the Continental Tire Pressure Monitoring System (TPMS) onto vehicles that were originally equipped with a Baolong TPMS.

Bulletin Number: SB-15-17-003 R4
It is now possible to retrofit the Continental Tire Pressure Monitoring System (TPMS) onto vehicles that were originally equipped with a Baolong TPMS.

Bulletin Number: SB1615001
DESCRIBES HOW TO RETROFIT THE 2ND GENERATION PREMIUM CENTER CONSOLE ASSEMBLY.

Bulletin Number: SB1690001
DESCRIBES HOW TO INSTALL THE PERFORMANCE PEDAL SET ACCESSORY.

Bulletin Number: SB1690001
DESCRIBES HOW TO INSTALL THE PERFORMANCE PEDAL SET ACCESSORY.

Bulletin Number: SB-17-10-006 R1
On Model S, the windshield wiper motor bracket might become loose, resulting in a popping or clicking noise during windshield wiper operation.

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002
On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performan

Bulletin Number: SB-18-13-002 R1
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-13-002 R2
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-13-002 R2
On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking moti

Bulletin Number: SB-18-32-002 R1
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-18-32-002 R3
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-18-32-002 R3
Long-term exposure to high-corrosion environments might weaken the bolts that attach the power steering motor to the steering rack housing.

Bulletin Number: SB-19-11-001
On certain Model S vehicles, the liftgate has plugs that do not allow water to drain, causing condensation to build up inside the tail light assembly. Tail light functionality is not affected. The retrofit of updated drain-type liftgate plu

Bulletin Number: SB-19-11-001
On certain Model S vehicles, the liftgate has plugs that do not allow water to drain, causing condensation to build up inside the tail light assembly. Tail light functionality is not affected. The retrofit of updated drain-type liftgate plu

Bulletin Number: SB-19-31-001
On certain Model S vehicles, either lower rear control arm might crack, causing excessive negative camber of the rear suspension.

Bulletin Number: TN-13-16-002
TESLA: WHEN REMOVING THE BATTERY PACK THESE PROCEDURES NEED TO BE FOLLOWED IN ORDER TO ENSURE PROPER SEALING OF THE HV RAPID MATE. NO MODEL OR MODEL YEARS GIVEN. *JS

Bulletin Number: TN-13-44-001
TESLA: DUE TO ISOLATION OF MODEL S HIGH VOLTAGE, A MONITOR IS INSTALLED IN BATTERY TO ENSURE NO ELECTRICAL CURRENT, BETWEEN VEHICLE AND HIGH VOLTAGE CONDUCTOR, IS BEING CARRIED AND IS MEASURED, PERIODICALLY, FOR RESISTANCE BETWEEN HIGH VOL

Bulletin Number: TN-13-44-001
TESLA: DUE TO ISOLATION OF MODEL S HIGH VOLTAGE, A MONITOR IS INSTALLED IN BATTERY TO ENSURE NO ELECTRICAL CURRENT, BETWEEN VEHICLE AND HIGH VOLTAGE CONDUCTOR, IS BEING CARRIED AND IS MEASURED, PERIODICALLY, FOR RESISTANCE BETWEEN HIGH VOL

Bulletin Number: TN-13-44-002
TESLA: HIGH VOLTAGE AWARENESS FOR MODEL S. THIS IS NOT AN OFFICIAL BULLETIN. NO MODEL YEARS WERE PROVIDED. *JS

Bulletin Number: TN-13-44-003
TESLA: THE HIGH VOLTAGE INTERLOCK LOOP (HVIL) DIAGNOSTIC GUIDE. THIS IS NOT AN OFFICIAL BULLETIN. NO MODEL TYPES OR MODEL YEARS WERE PROVIDED. *JS UPDATED 10/21/14. *PE

 
Recalls for 2013 Tesla Model S Base
2013 TESLA MODEL S
NHTSA Campaign ID: 13V249000
Component: SEATS
Manufacturer: Tesla Motors, Inc
Manufacture Dates: 05/10/2013 - 06/08/2013
Potential Units Affected: 1228
Defect Description:
Tesla Motors, Inc. (Tesla) is recalling certain model year 2013 Model S electric vehicles manufactured May 10, 2013, through June 8, 2013. An improper method for aligning the left hand seat back striker to the bracket may have weakened the weld between the bracket and the frame of the vehicle.
Consequence:
In the event of a crash, the left hand seat back may not stay mounted, increasing the risk of injury to passengers.
Action to take:
Tesla will notify owners, and Tesla Service Centers will inspect the left hand second row strikers. Tesla will add additional mounting hardware to ensure a proper joint between the bracket and the frame, free of charge. The recall began on June 24, 2013. Owners may contact Tesla at 1-650-681-5000.
2013 TESLA MODEL S
NHTSA Campaign ID: 14V006000
Component: EQUIPMENT:ELECTRICAL
Manufacturer: Tesla Motors, Inc.
Manufacture Dates: -
Potential Units Affected: 21081
Defect Description:
Tesla Motors, Inc. (Tesla) is recalling certain model year 2013 Model S vehicles equipped for, and delivered with, certain NEMA 14-50 (240 volt) Universal Mobile Connector (UMC) adapters. During charging, the adapter, cord, or wall outlet could overheat.
Consequence:
An overheated adapter, cord, or wall outlet increases the risk of burn injury and/or fire.
Action to take:
Tesla will notify owners and provide an "over-the-air" software update. Some owners have already received this update. This update allows the Model S on board charging system to detect any unexpected fluctuations in the input power or higher resistance connections to the vehicle. If detected, the onboard charging system will automatically reduce the charging current by 25%. Tesla owners can verify that they have received the updated software (version 5.8.4 or later) by viewing the vehicle's center information screen. Additionally, Tesla will mail owners a replacement NEMA 14-50 adapter that is equipped with an internal thermal fuse. The recall began on March 14, 2014. Owners may contact Tesla Service Center at 1-877-79-TESLA (1-877-798-3752).
2013 TESLA MODEL S
NHTSA Campaign ID: 15V780000
Component: SEAT BELTS:FRONT
Manufacturer: Tesla Motors, Inc.
Manufacture Dates: 05/31/2012 - 11/12/2015
Potential Units Affected: 59415
Defect Description:
Tesla Motors, Inc. (Tesla) is recalling certain model year 2012-2015 Model S vehicles manufactured May 31, 2012, to November 12, 2015. The affected vehicles are equipped with driver or front passenger seat belts that may be improperly connected to the outboard lap pretensioner.
Consequence:
If the seat belt is not correctly attached to the pretensioner, it may not properly restrain the seat occupant in the event of a crash, increasing their risk of injury.
Action to take:
Tesla will notify owners, and service centers will inspect the driver and front passenger seat belts, correcting their connection, as necessary, free of charge. The recall began on December 14, 2015. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-15-20-002.
2013 TESLA MODEL S
NHTSA Campaign ID: 17V260000
Component: PARKING BRAKE
Manufacturer: Tesla Motors, Inc.
Manufacture Dates: 07/12/2012 - 11/17/2016
Potential Units Affected: 31709
Defect Description:
Tesla, Inc. (Tesla) is recalling certain 2016 Model S and Model X vehicles. The electric parking brake calipers have an internal gear that may be improperly manufactured, possibly resulting in the gear fracturing during parking brake application or release.
Consequence:
If the gear breaks during parking brake release, the vehicle will not be able to be moved. If the gear breaks during parking brake application, the parking brake may not adequately hold the vehicle, potentially resulting in the vehicle rolling, increasing the risk of a crash.
Action to take:
Tesla will notify owners, and service centers will replace the electric parking brake calipers, free of charge. A remedy is currently unavailable. Interim notices informing owners of the safety risk were mailed June 8, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-17-33-002.
2013 TESLA MODEL S
NHTSA Campaign ID: 18V031000
Component: AIR BAGS:PASSENGER SIDE FRONTAL
Manufacturer: Tesla, Inc.
Manufacture Dates: 01/01/2013 - 12/31/2013
Potential Units Affected: 17846
Defect Description:
Tesla, Inc. (Tesla) is recalling all 2013 Model S vehicles equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence:
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Action to take:
Tesla will notify owners, and Tesla Service Centers will replace the passenger frontal air bag modules, free of charge. The recall is expected to begin in March 2018. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-18-20-001.
2013 TESLA MODEL S
NHTSA Campaign ID: 18V204000
Component: STEERING:ELECTRIC POWER ASSIST SYSTEM
Manufacturer: Tesla, Inc.
Manufacture Dates: 05/31/2012 - 04/09/2016
Potential Units Affected: 70421
Defect Description:
Tesla, Inc. (Tesla) is recalling certain 2012-2016 Tesla Model S vehicles equipped with Bosch steering racks. The aluminum bolts that attach the power steering gear assist motor to the gear housing may corrode and fracture causing a reduction or complete loss of power steering assist.
Consequence:
Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.
Action to take:
Tesla will notify owners, and Tesla Service Centers will replace the steering gear mounting bolts and add a corrosion-preventative sealer, free of charge. The recall began May 7, 2019. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-18-32-002.
 






Fuel Economy | Crash Results

Compar-A-Graphs:
4 Car Comparison | Rank-by-Specs
THE AUTO CHANNEL: Auto Channel Home | Auto News | Car Reviews | Media Library | Forums | Classifieds