The Auto Channel
The Largest Independent Automotive Research Resource
The Largest Independent Automotive Research Resource
Official Website of the New Car Buyer

FEV, Inc. announces technology lineup for 2012 SAE World Congress


fev hybrid

FEV exhibit highlights diverse skill set employed to support customers

AUBURN HILLS, MI--April 16, 2012: FEV, Inc., leading developers of advanced powertrain and vehicle technologies, announced today the technologies that it will exhibit at the 2012 SAE World Congress. The technologies were selected to demonstrate FEV's expertise in the development of propulsion and energy systems over a broad range of markets and the capabilities of the company to tightly integrate into its customers' production planning processes as they develop products for the global marketplace. Gary Rogers, FEV, Inc. president and CEO, made the announcement.

"FEV prides itself on the body of accumulated knowledge it possesses in the area of propulsion and energy systems," said Rogers. "As the nature of these systems has evolved to meet changing customer and regulatory demands, FEV has continued to expand and finely hone its expertise to address new technology fields such as e-mobility and electric and hydraulic hybrids, and has expanded its skill set to include all driveline components that are affected by this evolution. Our exhibit at the annual SAE World Congress contains examples that demonstrate the versatility and flexibility of FEV's engineering capabilities."

Technology features include:

E-Mobility

  • The KSPG Range Extender - FEV cooperated with KSPG in the development of a compact range extender that optimizes packaging, making it nearly universally applicable for small and medium-duty vehicles. The demonstrator, which weighs just over 132 lbs., is easily integrated into an existing vehicle because the vehicle interfaces are reduced to a minimum. The advantage this provides is that the range extender can be added as an accessory, or optional piece of equipment, providing a "bridge" between fully-electric vehicles and those with a supplemental source of power, should the battery energy be depleted before the driver is able to recharge.
  • Protean Drive System - Protean Drive-- is a fully integrated, direct drive solution that combines in-wheel motors with an integrated inverter, control electronics and software. With the elimination of a large, heavy, and costly independent inverter, each motor can be packaged easily in the unused space behind a conventional 18- to 24-inch wheel and can use the original equipment wheel bearing. The concept requires no gearboxes, drive shafts or differentials giving it far greater flexibility to vehicle designers. The system has the potential to significantly improve fuel economy, depending on the battery size and driving cycle.

Turbocharging and Downsizing

  • Ford EcoBoost 1.0L I3 Engine - The three-cylinder engine is designed for light-to medium duty Ford vehicles, and will initially be offered with power ratings of 73.5 and 92kW (98 and 123hp, respectively), providing the power of the Ford 1.6L four-cylinder, naturally aspirated engine, while offering better fuel economy and an overall weight reduction of approximately 20 lbs. Ford has stated that 73.5kW version in a Ford Focus delivers CO2 emissions of 114g/km (183g/mi) in the European combined cycle. 

Outboard Motor Development

  • Seven Marine 557hp Outboard Marine Engine - FEV will display Seven Marine's 557 hp outboard, based on the Cadillac CTS-V's lightweight, all-aluminum, fuel-injected, supercharged LSA V8, adapted for the marine market and delivering nearly 60 percent more power than any other outboard on the market.

Technology Improvements for Commercial and Passenger Car Engines

  • 2-Step VCR System - The FEV-developed 2-step VCR mechanism induces small variations in the conrod length, that are achieved by using the gas and mass forces for actuation, thereby achieving a compression ratio that is variable in two steps from 14:1 - 17:1 (in the case of a commercial diesel version).  This novel concept ensures rapid and accurate actuation without the use of an expensive power actuator.  Versions of the concept are available for both gasoline and diesel engines and can be applied to almost all existing engines (with bore diameters as low as 70 mm).  While the obvious benefit of the VCR system is increased engine efficiency, it also offers emissions related benefits, depending upon whether applied to gasoline or diesel engines. Other potential benefits include improved cold startability and the potential to optimize performance while utilizing alternative fuels. The system can be integrated into existing engine designs due to its carry over piston and pin design.
  • High Efficiency Combustion System (HECS) - HECS is an on-going R&D program being conducted by FEV that is aimed at the future of passenger car diesel engine design, targeting low CO2 and the best possible fuel efficiency.  The combustion system is designed for a high specific power output of over 100 kW/L. FEV engineers designed a 200 bar peak pressure cylinder head with variable valve lift, accomplished through the use of a unique, adjustable roller finger follower for two different lifts. Variable swirl improves homogeneity of the mixture and supports better combustion efficiency. A unique seat-swirl chamfer is combined with variable valve lift to increase swirl, greatly improving combustion. The HECS concept also features advanced thermal management, incorporating split cooling and an air gap insulated exhaust gas manifold, which contributes to improved aftertreatment functionality. A dual-wall exhaust also reduces heat loss to accelerate catalyst light-off during cold starts.  The HECS concept demonstrates EU 6 emissions without NOx aftertreatment in a 1700 kg vehicle.

About FEV
The FEV Group is an internationally recognized powertrain and vehicle engineering company that supplies the global transportation industry.  FEV offers a complete range of engineering services, providing support across the globe to customers in the design, analysis, prototyping, powertrain and transmission development, as well as vehicle integration, calibration and homologation for advanced internal combustion gasoline-, diesel-, and alternative-fueled powertrains. FEV also designs, develops and prototypes advanced vehicle / powertrain electronic control systems and hybrid-electric engine concepts that address future emission and fuel economy standards.  The FEV Test Systems division is a global supplier of advanced test cell, instrumentation and test equipment.  The FEV Group employs a staff of over 2,200 highly skilled specialists at advanced technical centers on three continents. FEV, Inc. employs approximately 350 personnel at FEV's North American Technical Center in Auburn Hills, MI.