Tim Allen Hosts 2001 S7 Saleen Mustang SuperCar Unveiling - BROADBAND VIDEO FLASHBACK
2001 Saleen S7 Supercar Unveiling
The day was over cast and breezy, a large variety of classic cars were warming up their tires on the famous Laguna Seca International Raceway road course, and an impressive crowd was gathering outside the Saleen display. A black nylon sheet cleverly covered the newest addition to Saleen Inc.
A joint effort between Steve Saleen, founder and president
of Saleen Inc, and S.A. “Tony” Johnson, President and CEO of
Hidden Creek Industries, they introduced the first Saleen
badged vehicle that was not based on another vehicle's
platform. Merging their company's strengths, Saleen and
Johnson formed a partnership that brings a unique sports car to
the market and establishes them as serious contenders in the
automobile manufacturing industry.
IRVINE, Calif. — Saleen, Inc., a specialty vehicle manufacturer for 17 years, has created the first true American supercar with the launch of the Saleen S7. The S7 is designed to compete with the fastest, quickest, best handling, most luxurious grand touring cars in the world, while providing a distinctly American driving experience for the fortunate few who will own one.
A true supercar, the Saleen is S7 is capable of over 200 miles per hour. Zero-to-60 time is under four seconds. With its extreme ground effects engineering, at 160 mph the car could be driven upside down and still stay attached to the road.
Designed, engineered, certified, manufactured and marketed by Saleen, the S7 was conceived to combine the performance of a track-only racecar with the driving pleasure of a road car. Working with some of the world’s most respected and technologically advanced automotive suppliers, the Saleen S7 will have gone from concept to first customer deliveries in just 18 months.
|In the asymmetrical cockpit, the driver’s seat is subtly moved toward the center of the cabin, enough to increase the driver’s position and visibility. This enhanced seat position contributes to an improved center of gravity and better weight distribution. Weight distribution is also a factor in the storage compartments. With a mid-chassis engine location, the S7 features a trunk in the front and rear of the vehicle. The S7 comes equipped with custom-fit luggage for use on long trips.|
When designing the S7, Saleen put drivability on a wide variety of road conditions high on the list of objectives. And, while the S7 would be at home on any racetrack, it is also a car that can be driven with pleasure on highways, autobahns and back roads.
The Saleen S7 architecture begins with a space frame chassis to which honeycomb composite reinforcing is grafted. Suspension is fully independent unequal length "A" arms. The S7 chassis and suspension are the result of Saleen’s years of racing, racecar building and high performance road car manufacturing experience. Famed British racing house Ray Mallock, Ltd. (RML) was enlisted to assist with the design and building of the chassis and packaging of the S7’s advanced suspension system.
The ever-popular Mustang celebrated its 35th anniversary last March with freshened styling, and is largely unchanged with the exception of the introduction of the limited-production, high-performance Cobra R. Like previous models of the same name, it's designed for racers.
The S7 engine and drive train are Saleen designed and incorporate modern racing motor technology and engineering. Saleen/Allen Speedlab race team engine builder, Bill Tally, is the engine’s designer. Based on a Ford-cast all aluminum block re-engineered by Saleen, the cam-in-block 7-liter motor generates 550 horsepower at 6400 rpm. Redline is 7000 rpm. The motor delivers 520 foot-pounds of torque at 4000 rpm. Space age materials and engineering are used throughout: magnesium throttle body and intake manifolds, carbon fiber induction system, stainless steel values, titanium retainers, beryllium exhaust valve seats, ceramic coated stainless steel exhaust system, and race-derived all-aluminum CNC machined Saleen designed heads.
An exclusive Saleen-designed Front Engine Accessory Drive (FEAD) system results in an extremely compact motor, allowing for better packaging and overall weight distribution. The motor incorporates a unique Saleen-designed side mounted water pump, extremely accurate belt-driven camshaft drive, and a Saleen-engineered dry sump oil delivery system.
|The Saleen S7's 7-liter engine is a technical tour de force, producing 550 horsepower at 6400 rpm. Based on a Ford form factor, the Saleen-massaged all-aluminum V-8 follows traditional American cam-in-block design to produce significant horsepower and torque with high reliability. The engine generates 520 foot-pounds of torque at 4000 rpm, transferred to the rear wheels through a new generation six-speed transaxle. Although the casting is based on a traditional Ford design, it was completely re-engineered by Saleen to be eight inches shorter than the block on which it was based. This Front Engine Accessory Drive (FEAD) system permits the use of a Saleen-designed, side-mounted water pump to help improve weight distribution and packaging..|
The engine’s mid-chassis placement optimizes weight distribution and center of gravity, making room for an unusually tall engine that allows for a very efficient plenum arrangement. With true "downdraft" induction, fuel is fed through matched trumpets in a straight shot to the ports.
A Saleen PowerFlash control system computer handles engine management. The ignition system is integrated coil-on-plug.
A new generation longitudinally mounted six-speed transaxle, with unique Saleen bell housing, transfers power to the wheels. The clutch is a metallic 5.5 inch, four plate unit with hydraulic actuation.
The S7’s shape was "designed" by the wind. Optimal aerodynamics and no compromise top speed performance objectives were achieved with extensive wind tunnel work. Targets were high co-efficient of drag, optimum drag-to-lift ratio, and extreme down force. The S7 has "full tray" body sculpting underneath.
With the performance targets met, longtime Saleen design consultant Phil Frank then personalized and refined the aesthetics of the S7 with the addition of signature Saleen elements. The gill-like ducting is, of course, fully functional. The autoclave carbon fiber body panels beautifully incorporate the advanced aerodynamics and include: integrated split-channel air flow throughout the car, full underside air management, advanced front tray and side skirt designs, and integrated full body wing.
As much care has been given to the creature comforts of the Saleen S7 as to its performance. Great attention was given to seating position. The car features asymmetrical seating, with the driver position moved slightly more to the center than the passenger. This improves the driver’s ergonomics, improves the weight distribution, and allows the passenger side to have a narrower threshold. The S7 is unusually accommodating of tall drivers.
Upholstery is covered with Connolly leathers and suedes. Accents are brushed aluminum and painted body-color highlights. Air conditioning, power windows, adjustable pedals, and a 6-disc CD player are all standard. The Saleen S7 has two unique interior features. The first is a live video rear view "mirror" – there is a small video camera inconspicuously mounted in the rear of the car – and the second is a steering wheel that can be removed if wished to ease ingress and egress.
The mid-engine Saleen S7 has front and rear trunks and comes with fitted luggage. In true supercar style, the doors open up and away from the body.
"The car, when seen in person, has an amazing presence," says Steve Saleen, founder and president of Saleen, Inc. "It is quite long and wide, and only 41 inches high, which adds to its exotic appearance. We wanted a 'form-follows-function' look, but also one that was beautiful. I’d say we succeeded!"
|Phil Frank, a long-time design consultant with Saleen, penned the S7’s body, using computer-aided drawing techniques. Saleen, Inc. and famed British racing house Ray Mallock, Ltd. used extensive work in a wind tunnel to add superior aerodynamics to the finished skin. The S7’s shape says “supercar” but the overall design is distinctive and not derivative of any other car. The drag to lift ratio, center of gravity, co-efficient of drag and the downforce generated by the S7’s body were all considered as part of the refinements produced in the wind tunnel. Full underside aerodynamics help reduce turbulence below the body and improve overall stability at high speed. Traditional Saleen design signatures – like functional gills and fascia openings –provide cooling and are integrated to also provide superior airflow around, through and under the car. The Saleen S7’s shape provides arguably the best overall aerodynamics of any production car ever built.|
While the S7 is an American supercar, the vehicle itself reflects a "best-in-practice" philosophy, where Saleen has incorporated superior components from around the globe in order to manufacture the best vehicle possible. For example, the 2001 Saleen S7 utilizes Brembo brakes from Italy as well as numerous high technology pieces from companies located in the Midlands area of the United Kingdom, a region that is to motorsports what the Silicon Valley is to computers. The S7 was wind tunnel tested at the University of Glasgow in Scotland.
The Saleen S7 is certified for sale in both the United States and United Kingdom. Designed and built at Saleen's Irvine, California manufacturing facility, the S7 is sold in the U.S. through select Saleen Certified Ford dealers and other newly added Saleen Certified dealers specializing in exotic automobiles. Vehicles for Europe and the Middle East will be produced at a satellite facility in conjunction with RML located in England. Worldwide volume is projected to be 300-400 cars over the estimated four-year production run. Work has begun on a less-expensive, higher volume model that will help achieve sales goals.
The Saleen S7 went on sale at its introduction at the famed Monterey Historic Races on August 19, 2000. First vehicles will be delivered to customers in the second quarter of 2001. The Manufacturer’s Suggested Retail Price (MSRP) is $375,000.
The 2001 Saleen S7 is a proof of concept for what Saleen, Inc. has been building for 17 years. As a federally certified specialty vehicle manufacturer, Saleen has produced over 7000 vehicles – using and perfecting the efficient Niche Manufacturing process, which is now being studied and adopted by the world’s major automakers as they strive to quickly and economically bring small volume products to market.
Saleen, Inc. facilities include total research, design, engineering, and manufacturing capabilities. The company's line also includes the Saleen S281 Mustang, Saleen XP8 Explorer, the SR Widebody, Saleen Performance Parts, and Saleen Engineering and Certification Service.
WHEELS AND TIRES
COMFORT AND CONVENIENCE